Ölpumpen für Motoröl, Hydrauliköl & Schmierstoffe
Zahnradpumpen, Flügelzellenpumpen, Kolbenpumpen und Druckluftpumpen von PIUSI, TECALEMIT, MATO, GRACO und Samoa – für die saubere und präzise Förderung von Motoröl, Getriebeöl, Hydrauliköl und anderen Schmierstoffen. Manuell, elektrisch oder druckluftbetrieben.
Elektro-Zahnradpumpen
Elektrische Zahnradpumpen (230V/400V) von PIUSI Viscomat GEAR und MATO EP für Motoröl, Getriebeöl und Hydrauliköl. Hoher Druck bis 16 bar, selbstansaugend bis 2 m Saughöhe.
Druckluft-Kolbenpumpen
PIUSI P3.5:1 und P5.5:1, GRACO LD 3:1/5:1 und TECALEMIT TecPump DP36 D – für hochviskose Öle und Schmierstoffe direkt aus dem 200-L-Fass. Kein Stromanschluss nötig.
Flügelzellenpumpen
PIUSI Viscomat 70M und 90M (230V) sowie MATO EP 40 für Öle bis 500 cSt und Pflanzenöle – hohe Förderleistung von 25–65 l/min für den Werkstatt-Dauerbetrieb.
Transfer- & Getriebeölpumpen
PIUSI Garda (12V/24V/230V) und Pressol Getriebeölpumpe SRL 500 für Getriebeöl bis SAE 140 aus Kanistern und Fässern – kompakt und für den mobilen Werkstatteinsatz.
MATO Electric Gear Pump EP 200
- High pressure performance
- Low flow rate of approximately 1 l/min
- Threaded connections: R 3/4" on the pressure side and R 1" on the suction side.
- Integrated bypass overpressure regulation
- Media classified under hazard class A3
- Flash point higher than 55°C
- Protected on/off switch
- Voltage: 230V
- Suitable for demanding applications
Delivery time: 2-5 days
PumpMaster 2 Professional Oil Dispenser DAV-200/21 DP 2:1 🛢️
- Translation ratio of 2:1
- Flow rate: 10 l/min
- Suction pipe with foot valve
- Spout with double valve
- Filter
- Storage area for oil cans
- Drum fitting with 2" thread
Delivery time: 2-5 days
pneuMATO 3 - Stationary Oil Pump System for 1000-Liter Tank with Pressure Hose 🚀
- Pressure Ratio: 1:3
- Flow Rate: 18 liters per minute
- Suction Pipe: Steel with foot valve and suction strainer
- Pressure Hose: DN12
Delivery time: 2-5 days
PIUSI Oil Pump Set DRUM Viscomat 70 K33 M 🛢️
- Performance: 28 liters per minute
- Voltage: 230V, 750W, 4.6A
- Includes suction pipe
- Mechanical flow meter K33
- Delivery hose: 4 meters
- Nozzle: Self 3000
- Fluids: Lubricating oils up to 500 cSt
- Suction height up to approximately 2 meters
- 2" quick coupling
Delivery time: 2-5 days
Oil Pump "Pumpmatic" EZP Mini 12V / 24V Samoa Lubrication Pump 🚜
- Maximum delivery pressure of 9 bar
- Portable electric pump with a pump holder for drum mounting
- 3-meter oil-resistant connection cable with plug, ready for immediate use
Delivery time: 2-5 days
Electric Gear Pump EZP 1.0 – 230 V 13 Liter SAMOA-Hallbauer 🚀
- Operating Voltage: 230 V, 50 Hz
- Current Consumption: 6 A
- Enclosure: IP 44
- Motor Power: 0.78 kW
- Flow Rate: approximately 13 l/min (dependent on viscosity) with free discharge
- Maximum Delivery Pressure: 10 bar
- Suction Side Connection: G 3/4″i
- Discharge Side Connection: G 3/4″i
Delivery time: 2-5 days
Electric Gear Pump EZP 0.5 – 230 V 10 Liter SAMOA-Hallbauer 🛠️
- Voltage: 230 V, 50 Hz
- Current: 6 A
- Protection Class: IP 44
- Motor Power: 0.78 kW
- Flow Rate: approximately 10 l/min (dependent on viscosity) with free discharge
- Maximum Delivery Pressure: 25 bar
- Suction Side: G 3/4″i
- Discharge Side: G 3/4″i
- Suitable Oils: Hydraulic, engine, transmission, and other oils up to a viscosity of 700 cSt
Delivery time: 2-5 days
PIUSI Gear Pump Viscomat 230/3 + FlowMat Oil Pump, Lubrication Pump 🛢️
- Voltage: 230V
- Flow Rate: 14 l/min
- Pressure: 16 bar
- Connection: 1" female thread
Delivery time: 1-3 days
PIUSI Gear Pump Viscomat 350/2 + FlowMat Oil Pump, Lubricant Pump 🚜🛢️
- Voltage: 230V
- Flow Rate: 9 l/min
- Pressure: 25 bar
- Connection: 1" internal thread
Delivery time: 1-3 days
MATO Electric Gear Pump EP 400
- High pressure performance
- High flow rate approximately 22 liters/min
- Voltage: 230V
- Integrated bypass overpressure regulation
- Protected on/off switch
- Threaded connections - R 3/4" on the pressure side and R 1" on the suction side
Delivery time: 2-5 days
Oil Pump Set DRUM Viscomat 90 K33 M PIUSI 🛢️
- Ready for immediate use
- Oscillating disc flow meter (K33)
- Performance: 50 liters/min
- Voltage: 230V, 1350W, 6.2A
- Includes suction tube
- Delivery hose 4m
- Self 3000 dispensing nozzle
- Suitable for lubricating oils up to 500cSt
- Suction height up to approximately 2m
Delivery time: 2-5 days
Oil Pump "Pumpmatic" EZP 0.4 230V 🌟
- Voltage: 230 V
- Current: 4 A
- Motor Power: 0.6 kW
- Flow Rate: approx. 9 l/min
- Max. Delivery Pressure: 9.5 bar
- Suction Side: G 1“a
- Pressure Side: G 3/4“a
Delivery time: 2-5 days
HORN Electric Pump for Fresh Oil Gear Pump TZ 10i 230V PORTABLE 🌟
- Flow rate: approximately 10 l/min
- Pressure: maximum 10 bar
- Viscosity range: maximum 600 mPa·s
- Suction connection: G 1/2 "
- Discharge connection: G 1/2 "
- Power supply: 230 V
- Dimensions (W x D x H): 388 x 266 x 330 mm
- Weight: 20 kg
Delivery time: 2-5 days
Compressed Air Piston Pump Unit "PumpMaster 4" DP 3:1 plus SAMOA-Hallbauer 🚀
- Translation Ratio: 3:1
- Air Pressure: min. 1.5 to max. 10 bar
- Flow Rate: approx. 42 l/min*
- Air Motor: Ø 88 mm
- Piston Stroke: 100 mm
- Air Connection: G 1/4"i, coupling plug included
- Pressure Side: G 3/4"a
- Suction Side: G 1"a
Delivery time: 5-10 Tage
Electric Pump Oil Pump VISCONET II - 230V - Horn 🔌🛢️
- Pumping Capacity: approximately 28 l/min
- Suction Tube Length: 840 mm
- Dispensing Hose: 4 m
- Viscosity (at 740 Watts): 100 - 2000 mPa·s
- Dispensing Hose Diameter: DN 19 x 4 mm
- Drum Thread: G 2"
- Weight: 13.5 kg
Delivery time: 2-5 days
PIUSI MA130 Pneumatic Diaphragm Pump for Transferring High Viscosity Oils, e.g., Waste Oil 🚜💧
- Flow Rate: 50 liters per minute
- Air Connection: G 3/8" F
- Inlet/Outlet: 1/2" G
- Diaphragm Type: Single NBR
- Max. Self-Priming Flow Rate: 5 meters
- Max. Air Supply Pressure: 7 Bar
- Max. Solid Transfer Diameter: 4 mm
- Media: High viscosity oil, e.g., waste oil, diesel
- Diaphragm Type: Single NBR
Delivery time: 2-5 days
Compressed Air Diaphragm Pump "Directflo®" DF 50 Double Diaphragm Pump for Dosing, Transferring, and Suctioning 💧
- Translation Ratio: 1:1
- Flow Rate: approx. 50 l/min
- Volume per Stroke: approx. 0.1
- Air Pressure: 1.5 to 8 bar
- Max. Particle Size: 3 mm
- Max. Dry Suction Height: approx. 6 m
- Max. Suction Height (pre-filled): approx. 8 m
- Weight: approx. 3.5 kg
Delivery time: 2-5 days
MATO Electric Gear Pump EP 300-DS 🛠️
- Voltage: 230V
- Low pressure performance
- High flow rate (approx. 22l/min)
- Media according to hazard class A3
- Pressure switch control
- Integrated bypass overpressure regulation
Delivery time: 2-5 days
Viscotroll 70 Oil Dispensing Unit by PIUSI 🛢️
- Viscomat Pump
- KIT Pedal Valve
- Self 3000 Dispensing Valve
- Durable Cart
Delivery time: 2-5 days
MATO Electric Gear Pump EP 200-DS 🛠️
- Voltage: 230V
- High pressure performance
- Low flow rate (approx. 1l/min)
- Media according to hazard class A3
- Pressure switch control
- Integrated bypass overpressure regulation
Delivery time: 2-5 days
MATO Electric Gear Pump System EP 100 for 200-Liter Oil Drums with 4m Pressure Hose and Oil Gun 🚀
- Delivery Pump: approximately 11 liters/minute
- Maximum Pressure: approximately 8 bar
- Suction Height up to 2.5 meters
- Includes steel suction pipe for 200-liter drum with R2" drum adapter, foot valve, and suction strainer
- 4-meter pressure hose DN 12 with DKR 1/2" union nut
Delivery time: 2-5 days
Oil Pump "Pumpmatic" EZP 0.5 230V 🌟
- Voltage: 230 V
- Flow Rate: approx. 10 l/min
- Max. Pressure: 25 bar
- Suction Side: G 1“a
- Discharge Side: G 3/4“a
Delivery time: 2-5 days
Oil Pump Pumpmatic EZP 0.4 for Drum Samoa-Hallbauer 🛢️
- Suitable for hydraulic, engine, transmission, vegetable oils, and other oils with a viscosity of up to 700 cSt, as well as antifreeze concentrates
- Ideal for short transfer distances where the use of a hose reel is not necessary
- 230 V, 50 Hz, 4 A, IP 44, motor power 0.6 kW
- Flow rate approximately 9 l/min (depending on viscosity) with free discharge
- Maximum delivery pressure of 9.5 bar
- For 200-liter drums
- Filling gun with swivel joint, outlet pipe for engine oil, and drip stop
- Suction pipe with foot valve
- 4 m pressure hose NW 16, G 3/4″
Delivery time: 5-10 Tage
Used Oil Pump Pumpmatic EZP 0.4 AW Samoa-Hallbauer 🛢️
- Gear Pump EZP 0.4 A
- For extracting used oil
- Suction side G 3/4" external
- Pressure side G 3/4" external
- Includes wall mounting bracket
- Filter screen at suction connection
- Not suitable for commercial vehicles
- 230 V, 50 Hz, 4 A, IP 44, Motor power 0.6 kW
- Suction capacity of 2 l/min via suction probes or 8 l/min via suction nozzle with operating temperature oil (approx. 60°C)
Delivery time: 5-10 Tage
Welche Ölpumpe passt zu welchem Einsatz?
Kfz-Werkstatt
Für regelmäßigen Ölwechsel empfehlen sich elektrische Zahnradpumpen wie PIUSI Viscomat GEAR 200/2 oder MATO EP 100 – schnell, sauber und mit Bypassventil für dauerhaften Betrieb.
Landwirtschaft & Hof
Für Traktor und Landmaschinen: PIUSI Garda (12V/24V) als kompakte Transferpumpe für Motoröl und Getriebeöl direkt aus dem Kanister, oder Druckluftpumpen aus dem Fasslager.
Industrie & Dauerbetrieb
Für kontinuierliche Förderung großer Mengen: MATO EP 40 Flügelzellenpumpe (65 l/min) oder Viscomat 90M (50 l/min) – robust für Dauerbetrieb mit Hydraulik- und Schmierölen.
Hochviskose Öle & Schmierstoffe
Für Öle ab SAE 90 bis SAE 140: Druckluft-Kolbenpumpen PIUSI P3.5:1 / P5.5:1 oder GRACO LD 3:1 / 5:1 – das Übersetzungsverhältnis bestimmt den Druck für zähflüssige Medien.
Getriebeöl aus Kanister
Für die Befüllung aus 20-L-Kunststoffkanistern: Pressol Getriebeölpumpe SRL 500 mit M60×5-Gewindeanschluss – manuell, robust und für Öle bis SAE 140 geeignet.
Frischöl & Frischemulsion
Für die saubere Ölbefüllung in der Werkstatt: TECALEMIT Frischölpumpe TZ10l oder PIUSI Viscomat + FlowMat mit automatischer Abschaltung für saubere, präzise Dosierung.
Häufige Fragen zu Ölpumpen
Nicht sicher welche Ölpumpe passt?
Unser Fachteam berät Sie kostenlos zur richtigen Ölpumpe für Ihr Medium, Ihre Viskosität und Ihren Anwendungsfall.
☎ 036071 924340 anrufen Angebot anfordern