Why do I need a special pump for AdBlue?

AdBlue corrodes copper, brass and zinc. AdBlue pumps are made of stainless steel, PP and EPDM. Contamination from diesel residues would damage the SCR system. Never run AdBlue and diesel through the same hoses.

What is the difference between a diaphragm pump and a submersible pump for AdBlue?

A diaphragm pump (SB34, HORNET) sits outside, self-priming up to 3m. A submersible pump (PIUSI SQUALO35) is immersed directly in the IBC – no suction problems, compact, low-maintenance. For IBCs a submersible pump is often more elegant; for drums a diaphragm pump is more suitable.

What flow rate do I need for cars and trucks?

Cars/vans (5–25L SCR tank): 10–20 l/min is sufficient. Trucks (40–100L): 35–57 l/min (HORNET, GRACO) for short refuelling times. PIUSI DELPHIN PRO and Suzzarablue offer an infinitely adjustable output for both applications.

What is the difference between the HORNET Light and the HORNET Standard?

The same pump unit (48 l/min, 230V). Light Basic: a 4m hose, a mounting bracket. Standard with FMT3: an electronic flow meter, an 8m hose, an A2003-KS automatic nozzle – the most complete solution for professional fleet refuelling.

Category · Pumps & dispensers for AdBlue® / urea AUS 32

AdBlue® pumps manual, electric, air-operated & as a dispenser

The complete range for pumping urea solution AUS 32 – from the simple hand-crank pump to the stationary dispenser with a fuel management system. From Pressol, PIUSI, Tecalemit, MATO, Samoa and GRACO. For canisters, 200 L drums and IBC containers.

✅ Manual · 12V · 24V · 230V · compressed air ✅ 50 ml/stroke to 57 l/min ✅ Drum · IBC · stationary ✅ From €49 to €5,023

Jump to: Manual & crank 12V / 24V 230V diaphragm pump HORNET 48 l/min Dispensers FAQ

Manual & rotary pumps

Pressol SRL 1000 hand pump (50 l/min, €49), SRL 900/1050 rotary pumps for drums and the PIUSI lever hand pump with a 3 m hose (€114) – for occasional AdBlue® filling without power. PIUSI rotary pump Pro with a 2.5 m hose for IBC containers.

Electric 230V – diaphragm pump

PREMAxx set 52 l/min, MATO diaphragm pump 34 l/min, PIUSI SQUALO35 submersible pump (35 l/min), diaphragm pump SB34 for drums (stationary) or IBC (with an SEC coupling) and Suzzarablue Basic/PRO with a K24 meter – compact 230V solutions from €350.

TECALEMIT HORNET – 48 l/min

HORNET W85H INOX as a drum pump (€566), HORNET Light Basic as a pump set, IBC compact pump system Light and Standard – all with 48 l/min, 230V, an automatic nozzle. With an FMT3 flow meter (€846) for accurate consumption recording.

Stationary dispensers

PIUSI DELPHIN PRO_X DC (2–15 l/min, DC/230V), PIUSI SELF SERVICE MC 2.0 (32 l/min, 230V, IP55), TECALEMIT HDM eco with a litre counter (€3,975) or a fuel management system with PC software (€5,023) – for permanent stationary indoor operation.

Pompa manuale SRL 1000 per soluzione AdBlue® / urea 50l/min

Hand Pump SRL 1000 for AdBlue®/Urea Solution 50L/min 🚰

Flow Rate: approximately 50 l/min
Pumped Media: AdBlue®, non-aggressive media
Application: Containers for 60/200/220 liters

Delivery time: 1-3 days

€49.00* €54.00*

€41.18 without VAT

Pompa a manovella SRL 900 per acidi organici, alcoli, detergenti

Hand Crank Pump SRL 900 for Organic Acids, Alcohols, Cleaning Agents 🚰

Pumping Capacity: 0.18 liters/revolution, approximately 22 liters/minute
Pumped Media: organic acids, organic alcohols, cleaning agents, windshield washer fluid
Container Capacity: 60/200/220 liters
Suction Tube Length: 980 mm
Drum Fitting: G 2'' a

No longer available

€89.00*

€74.79 without VAT

Details

Pompa a manovella SRL 1050 per gasolio, acqua e AdBlue®

Hand Crank Pump SRL 1050 for Diesel, Water, AdBlue® 🚰

Pumping Capacity: 0.18 liters per revolution, approximately 10 liters per minute
Pumped Media: Windshield Cleaner, Diesel, Water, AdBlue®
Container with 60/200/220 liters capacity
Suction Pipe Length: 1050 mm
Drum Fitting: G 2'' a

Delivery time: 1-3 days

€107.35*

€90.21 without VAT

Pompa manuale a leva con tubo di erogazione per soluzione di urea AdBlue®

PIUSI SUZZARABLUE HAND PUMP, AdBlue® Hand Pump with Complete Kit, 3 m Hose

Fluids: AdBlue® (urea solution to ISO 22241)
Type: lever piston hand pump
Spout: 3/4" BSP
Ready to use and user-friendly
Materials to ISO 22241

Delivery time: 1-3 days

€116.00* €135.00*

€97.48 without VAT

Pompa a manovella in polipropilene RP 100-PP per prodotti chimici e carburanti ✅

Polypropylene Hand Crank Pump RP 100-PP for Chemicals & Fuels

Pumping Capacity: 250 cc/rev
Drum Connection Thread: R2"
Suitable for Container Sizes up to 200 Liters
Compatible Media: AdBlue®, Antifreeze, Windshield Cleaner, Water-Based Media, Diesel, and Heating Oils

Delivery time: 2-5 days

€169.00*

€142.02 without VAT

PIUSI Pompa a manovella Pro con tubo per contenitore IBC per soluzione di urea AdBlue®

PIUSI HAND PUMP IBC, AdBlue® Hand Pump with IBC Bracket, 38 l per 100 Revolutions

Fluids: AdBlue® (urea solution to ISO 22241)
Flow rate: 38 l per 100 revolutions
Hose: suction 1 m, delivery 2.5 m
Ergonomic IBC bracket, easy to move
Powerful lever, high efficiency

Delivery time: 1-3 days

€256.50*

€215.55 without VAT

Pompa per fusti e contenitori per la soluzione di urea AdBlue® SB 19-12 /230 V MATO elettrica

Barrel and Container Pump for AdBlue® Urea Solution SB 19-12 /230 V MATO Electric ⚡

Voltage: 12 V / 230 V
Flow Rate: approximately 19 L/min
Suitable for IBC Containers
Includes Accessories

Delivery time: 5-10 Tage

€276.50*

€232.35 without VAT

Pompa per AdBlue® Urea 230V PREMAxx Set 52l/min

Pump for AdBlue® Urea 230V PREMAxx Set 52L/min 🚜

Voltage: 230V
Flow Rate: approx. 52 l/min
Manual Dispensing Nozzle
Usable as a Drum Pump
Power Outage Bypass through Manual Pumping

Delivery time: 2-5 days

€350.00*

€294.12 without VAT

Pompa a membrana 230V - 34 l/min per AdBlue® Urea

MATO AdBlue® Diaphragm Pump SB 30, 230 V, approx. 30 l/min, for AUS 32 Urea Solution

Fluids: AdBlue® (AUS 32), antifreeze, screen wash, water-based media
Flow rate: approx. 30 l/min (free flow)
Operating pressure: max. 1,6 bar
Diaphragm pump for AdBlue®, antifreeze, screen wash and water-based media
Approx. 30 l/min free flow, max. 1.6 bar

Delivery time: 2-5 days

€377.00*

€316.81 without VAT

Kit 12V e 230V per pompe della soluzione di urea AdBlue®

PIUSI SUZZARABLUE PORTABLE KIT, Portable AdBlue® Pump 12 V or 230 V with Nozzle

Fluids: AdBlue® (urea solution to ISO 22241)
Flow rate: up to 35 l/min (12 V) or 32 l/min (230 V)
Duty cycle: 20 min
Ready to use and portable
SUZZARABLUE pump with on/off switch, 20 min duty cycle

Delivery time: 1-3 days

€514.50*

€432.35 without VAT

Details

SQUALO 35: Pompa con timer 230 V efficiente per industria e artigianato ✅🔧

PIUSI SQUALO35, AdBlue® Submersible Pump 230 V, 35 l/min, with Timer

Fluids: AdBlue® (urea solution to ISO 22241)
Flow rate: 35 l/min
Max. pressure: 1.8 bar operating pressure
Regenerative turbine impeller, integrated pressure regulator
Built-in check valve, timer

Delivery time: 2-5 days

€542.50*

€455.88 without VAT

Pompa elettrica HORNET W 85 H INOX Pompa per fusti Pompa AdBlue®

Electric Pump HORNET W 85 H INOX Drum Pump AdBlue® Pump

Voltage: 230V
Flow Rate: approx. 48 l/min
Automatic Nozzle A2003-KS
Discharge Hose: 8 m
Drum Fitting G 2''
Suction Pipe Length: 1000 mm

Delivery time: 2-5 days

€565.50* €746.13*

€475.21 without VAT

Details

HORNET W 85 H INOX Light Basic set di pompe per soluzione di urea AdBlue®

HORNET W 85 H INOX Light Basic Pump Set for AdBlue® Urea Solution 🚛💧

Stainless steel mounting bracket
Voltage: 230V
Flow rate: approximately 48 liters/min
HORN standard dispensing nozzle
Suction hose with SEC coupling
Dispensing hose: 4 meters

Delivery time: 2-5 days

€565.50* €746.13*

€475.21 without VAT

Pompa per Urea AdBlue® Sistema di pompaggio compatto IBC HORNET W 85 H INOX Light

AdBlue® Urea Pump IBC Compact Pump System HORNET W 85 H INOX Light 🚛💧

Suitable for IBC containers and 200-liter drums
Voltage: 230V
Flow rate: approximately 48 liters per minute
Dispensing hose: 4 meters
Suction hose with SEC coupling
Equipped with HORN standard dispensing nozzle

Delivery time: 2-5 days

€565.50* €746.13*

€475.21 without VAT

Sistema di pompaggio compatto IBC HORNET W 85 H INOX per AdBlue®

IBC Compact Pump System HORNET W 85 H INOX for AdBlue® 🚛💧

For IBC containers
Voltage: 230V
Flow rate: approximately 48 liters per minute
Dispensing hose: 8 meters
HORN automatic dispensing nozzle, stainless steel
Integrated nozzle holder

Delivery time: 2-5 days

€705.50* €932.96*

€592.86 without VAT

AdBlue® Urea Sistema di pompaggio compatto IBC HORNET W 85 H INOX

AdBlue® Urea IBC Compact Pump System HORNET W 85 H INOX 🚛

Suitable for IBC containers and 200-liter drums
Voltage: 230 V
Flow rate: up to 48 liters per minute
Suction height: up to 4 meters
8.0-meter dispensing hose (DN19)
Suction hose with CDS coupling
HORN automatic dispensing nozzle

Delivery time: 2-5 days

€705.50* €932.96*

€592.86 without VAT

Pompa per Adblue® - Soluzione di urea Suzzarablue Basic 230 V SB325

PIUSI SUZZARABLUE 3 BASIC, AdBlue® Dispensing Unit 230 V, 35 l/min, SB325_X

Fluids: AdBlue® (urea solution to ISO 22241)
Flow rate: 35 l/min
Electrical data: 230 V/50 Hz
Portable AdBlue® dispensing unit with SUZZARABLUE pump
Ergonomic mounting, robust design

Delivery time: 1-3 days

€837.00*

€703.36 without VAT

HORNET W85 H INOX Standard, FMT 3, console laterale

HORNET W85 H INOX Standard, FMT 3, Side Console 🚀

Stainless Steel Mounting Bracket
Voltage: 230V
Flow Rate: approx. 48 liters/min
Flow Meter FMT 3
HORN Automatic Nozzle A 2003-KS
Suction Hose with SEC Coupling
Dispensing Hose: 8m

Delivery time: 2-5 days

€846.00* €1,119.79*

€710.92 without VAT

Pompa per AdBlue® Urea Sistema di pompaggio compatto IBC HORNET W 85 H INOX FMT 3

Pump for AdBlue® Urea IBC Compact Pump System HORNET W 85 H INOX FMT 3

For IBC containers and 200-liter drums
Voltage: 230 V
Flow rate: approximately 48 liters per minute
Dispensing hose: 8 meters
Includes electronic flow meter FMT 3
HORN automatic dispensing nozzle A 2003-KS
Convenient nozzle holder
Easy installation

Delivery time: 2-5 days

€846.00* €1,119.79*

€710.92 without VAT

GRACO pompa a diaframma doppio azionata ad aria per la soluzione di urea AdBlue®

GRACO Air-Operated Double Diaphragm Pump for AdBlue® Urea Solution

Flow Rate: 57 liters/min
Inlet Connection: 1/2“
Outlet Connection: 1/2“
Medium: AdBlue® Urea Solution

Delivery time: 2-5 days

€848.00* €899.00*

€712.61 without VAT

Pompa a membrana SB 34 stazionaria per soluzione di urea AdBlue®

Stationary Diaphragm Pump SB 30 for AdBlue® Urea Solution

For 200-liter drums
Voltage: 230V
Flow rate: approximately 30 l/min
6m pressure hose 3/4"
0.5m suction hose
2-piece suction tube
SEC coupling with 2" TriSure thread
Includes bridge head mount for plastic drums
Gun holder with integrated drip tray

Delivery time: 2-5 days

€853.50*

€717.23 without VAT

Pompa a membrana per AdBlue® urea SB 34-IBC con contatore

Diaphragm Pump for AdBlue® Urea SB 34-IBC with Meter

For IBC containers
Voltage: 230V
Flow rate: approximately 34 l/min
SEC coupling
1.5m suction hose
6m pressure hose 3/4"
Turbine wheel meter DIGIMET K24
Automatic dispensing nozzle ASB with stainless steel spout

Delivery time: 2-5 days

€944.00*

€793.28 without VAT

Pompa Adblue® Suzzarablue PRO con contatore 230 V SB325

PIUSI SUZZARABLUE 3 PRO, AdBlue® Dispensing Unit 230 V, 35 l/min, SB325_X, K24 Meter

Fluids: AdBlue® (urea solution to ISO 22241)
Flow rate: 35 l/min
Electrical data: 230 V/50 Hz
Portable AdBlue® dispensing unit with SUZZARABLUE pump
Ergonomic mounting, robust design

Delivery time: 1-3 days

€988.50*

€830.67 without VAT

Set pompa AdBlue® per urea per IBC per il rifornimento di auto 230V

AdBlue® Urea Pump Set for IBC for Car Refueling 230V 🚗

Voltage: 230V
Flow Rate: approx. 14 l/min
Elaflex Automatic Nozzle
Digital Counter
Suction Height: 3m

Delivery time: 2-5 days

€1,180.00*

€991.60 without VAT

Which AdBlue® pump suits which application?

✋

Occasional & without power

For the infrequent filling of small quantities without a power connection: Pressol SRL 1000 hand pump (€49, 50 l/min) or PIUSI lever hand pump (€114) with a 3 m hose for 60/200 L drums – no power, no compressed air, ready to use straight away.

🚜

Agriculture & vehicle battery

For refuelling on the farm or on the construction site without a mains connection: MATO SB 19-12 (12V/230V) or PIUSI Kit 12V & 230V – on a vehicle battery or generator, with a suction hose and accessories for IBC containers.

🏗️

Workshop & regular refuelling

For daily use with a mains connection: diaphragm pump SB34 stationary (€853) for 200 L drums or diaphragm pump SB34-IBC (€944) for IBC containers with an SEC coupling – compact, 34 l/min, clean and low-maintenance.

🚛

Fleet & high flow rate

For the fast refuelling of several trucks a day: TECALEMIT HORNET W85H INOX (48 l/min, 230V) as a drum pump or IBC compact pump system with an 8 m hose and an automatic nozzle. With an optional FMT3 flow meter for a consumption log.

💨

Compressed air – without an electric motor

For use without a power grid or in explosion-protection areas: GRACO air-operated double-diaphragm pump (€847, 57 l/min) – the highest flow rate in this category, no electric motor, no spark risk. Self-priming, for IBCs and large containers.

🏭

Stationary dispenser

For permanent operation with consumption recording: PIUSI SELF SERVICE MC 2.0 (32 l/min, IP55) with access control or TECALEMIT HDM eco (40 l/min) as a classic dispenser with a litre counter or fuel management system. For indoor installation.

Frequently asked questions about AdBlue® pumps

AdBlue® (urea solution AUS 32) is strongly corrosive towards copper, brass and zinc – materials that are common in standard diesel or oil pumps. AdBlue® pumps are made of corrosion-resistant materials such as stainless steel, polypropylene (PP) and EPDM. In addition, residues from diesel pumps would contaminate the AdBlue® and damage the vehicle's SCR injection system. Never run AdBlue® and diesel through the same hoses or pumps.

A diaphragm pump (SB34, HORNET) sits outside the container and draws the AdBlue® in via a suction hose – self-priming up to about 3 m, suitable for drums and IBC containers. The PIUSI SQUALO35 submersible pump is immersed directly in the IBC container – no suction problems, a compact design, low-maintenance. For IBC containers the submersible pump is often the more elegant solution; for changing drums the diaphragm pump is more suitable.

SEC (Standard Euro Coupling) is a standardised dry-coupling system for AdBlue® connections on IBC containers. No AdBlue® escapes when disconnecting – important, since AdBlue® forms crystals as it dries out and corrodes metals. Pumps with an SEC coupling (e.g. diaphragm pump SB34-IBC, HORNET W85H INOX) are particularly suitable for IBC use and enable a clean, fast container change without drip loss.

For cars and vans with small SCR tanks (5–25 L), 10–20 l/min is sufficient – a high flow rate carries the risk of splashing back. For trucks with large SCR tanks (40–100 L), 35–57 l/min (HORNET, GRACO) is more economical, since the refuelling time is considerably shorter. The PIUSI DELPHIN PRO and Suzzarablue models offer an infinitely adjustable output for both use cases.

AdBlue® crystallises as it dries out and can clog or damage pumps, hoses and nozzles. After each use: flush the hose and nozzle with clear water and let them run empty. In the event of a longer standstill (over 2 weeks), empty and flush the entire pump. In frost (below −11 °C), the pump must be emptied completely, as frozen AdBlue® can burst the pump housing.

All HORNET W85H INOX variants have the same pump unit (48 l/min, 230V, stainless steel). The differences lie in the accessories and the mounting configuration: Light Basic (€565): a stainless-steel mounting bracket, a 4 m hose, a standard nozzle. Light IBC compact: specifically for IBC containers with an SEC coupling. Standard with FMT3 (€846): with an electronic FMT3 flow meter for accurate litre recording, an 8 m hose and an A2003-KS automatic nozzle. The FMT3 model is the most complete solution for professional fleet refuelling.

The right AdBlue® pump for your operation

Our specialist team advises you free of charge – on flow rate, container type, voltage and the optimal solution for your vehicle fleet.

☎ Call +49 36071 924340 Request a quote

More AdBlue® / urea AUS32 range

Stationary tank systems

Fuel management systems