AdBlue® dispensers for stationary indoor urea dispensing
Stationary AdBlue® dispensers from TECALEMIT for the professional dispensing of urea solution AUS 32 in workshops, fleets and on-site fuel stations. 40 l/min, 230V, indoor version – with a litre counter or a complete fuel management system with PC software.
With a litre counter – simple & direct
The TECALEMIT HDM eco (€3,975) is the compact solution for stationary AdBlue® dispensing without access control – with a mechanical litre counter, A2003 automatic nozzle and hose holder. For operations with a manageable vehicle fleet.
With a fuel management system – logging & access
The TECALEMIT HDM eco with a fuel management system (€5,023) adds complete access control and PC software for consumption-data recording to the dispensing unit – every refuelling is logged with the user ID, date and quantity. Not calibratable.
AdBlue®-resistant materials
AdBlue® / urea solution AUS 32 is corrosive towards metals such as copper and brass. Both HDM eco dispensers are made of stainless steel and corrosion-resistant plastics – with an AdBlue®-specific nozzle and EPDM seals.
Need more flow rate?
For higher flow rates (up to 57 l/min), IBC pump systems or mobile AdBlue® dispensing, our AdBlue® pumps and urea AUS32 tank systems are at your disposal.
Litre counter or fuel management system – what suits your operation?
Litre counter – for manageable fleets
If you refuel 1–5 company vehicles and don't need individual consumption assignment: HDM eco with a litre counter (€3,975) – simply read off, no software effort, ready to operate straight away. Ideal for small workshops and agricultural operations.
Fuel management system – for fleets with a logging requirement
When several drivers use the dispenser and consumption per vehicle or driver is to be documented: HDM eco with a fuel management system (€5,023) – access control, PC software and complete fuel-data recording for cost control and accounting.
Planning an indoor installation
Both models are designed for indoor operation – in workshops, halls or covered fuelling areas. For an outdoor installation with weather protection and for IBC-container filling, we recommend our separate AdBlue® pump systems.
Tank & source
An AdBlue® dispenser requires a connected AdBlue® tank as its source. For stationary tank systems (1,000–5,000 L) with complete infrastructure, we refer you to our stationary AUS32 tank systems. The dispenser is connected directly to the tank.
How much flow rate do I need?
At 40 l/min, a typical 20 L AdBlue® tank is filled in under 30 seconds. This flow rate is optimal for cars, vans, tractors and light to medium trucks. For heavy trucks with large SCR tanks and several simultaneous dispensing points, dedicated dispensing systems with a higher output make sense.
Handling AdBlue® correctly
AdBlue® crystallises as it dries out and attacks many metals. The TECALEMIT HDM eco is made entirely of AdBlue®-resistant materials (stainless steel, PP, EPDM). After longer standstill periods, flush the nozzle and hose with clear water to avoid crystal deposits.
Complementary products for your AdBlue® supply
AdBlue® pumps for drums & IBCs
For dispensing from 200 L drums or IBC containers without a fixed dispenser: TECALEMIT HORNET W85H INOX, PIUSI Suzzarablue and Flux Juniorflux sets – all available in the AdBlue® pumps category.
Stationary AUS32 tank systems
Complete tank systems for AdBlue® / urea AUS32 from 1,000 to 5,000 L with an integrated pump, meter and safety equipment – in the Stationary tank systems category for urea AUS32.
AdBlue® nozzles & accessories
Replacement nozzles, dispensing valves and accessories for AdBlue® dispensing devices can be found in the categories AdBlue® nozzles and urea accessories.
Frequently asked questions about AdBlue® dispensers
AdBlue® supply for your operation
Our specialist team will advise you free of charge – from the dispenser through the right storage tank to the complete stationary AdBlue® system.
☎ Call +49 36071 924340 Request a quote