MATO EP 400 Electric Gear Pump, 230 V Pump Unit for Hydraulic, Engine and Gear Oils of Low to High Viscosity, approx. 22 l/min, 16 bar
€838.00*
- Flow rate: approx. 22 l/min (SAE 30, free outlet)
- Maximum pressure: approx. 16 bar
- Electrical data: 230 V, 50 Hz, 5.3 A, 0.75 kW, IP55
- Self-priming electric gear pump unit
- Protected on/off switch, integrated bypass valve
Delivery time: 2-5 days
MATO EP 400 Electric Gear Pump – 230 V Pump Unit for Hydraulic, Engine and Gear Oils of Low to High Viscosity, approx. 22 l/min, 16 bar
The MATO EP 400 is a self-priming electric gear pump unit for hydraulic, engine and gear oils of low to high viscosity with a flow rate of approx. 22 l/min (SAE 30, free outlet) and a maximum pressure of approx. 16 bar. The motor runs on 230 V, 50 Hz, 5.3 A and 0.75 kW (IP55); the threaded connections are R 3/4" on the delivery side and R 1" on the suction side, and the suction height is up to 2.5 m. The EP 400 has a protected on/off switch and an integrated bypass valve and is also suitable for hose reels and long delivery lines.
Product features
- Self-priming electric gear pump unit
- Protected on/off switch, integrated bypass valve
- Integrated bypass valve
- 3 m power cable
- For fluids of hazard class A3 with flash point above 55 °C
Technical data
- Manufacturer: MATO
- Manufacturer part number: 34 340 76
- EAN: 4016553434076
- Flow rate: approx. 22 l/min (SAE 30, free outlet)
- Maximum pressure: approx. 16 bar
- Electrical data: 230 V, 50 Hz, 5.3 A, 0.75 kW, IP55
- Suction height: up to 2.5 m
- Pump thread connection: R 3/4" (delivery side) / R 1" (suction side)
- Fluids: hydraulic, engine and gear oils of low to high viscosity, hazard class A3, flash point above 55 °C
- Control: protected on/off switch, integrated bypass valve
- Power cable: 3 m
- Accessories (separate): pressure relief system for retrofitting (MATO 34 336 97)
- Weight: approx. 15.5 kg
Applications
- Oil dispensing in workshops, fleets, agriculture and industry
- Transferring hydraulic, engine and gear oils from drums and tanks
- Operation with hose reels and long delivery lines
Scope of delivery
- 1 × EP 400 electric gear pump unit with 3 m power cable
Notes
Do not run the pump against a closed nozzle for more than 5 minutes. A pressure relief system (MATO 34 336 97) is available for retrofitting. Technical data subject to change by the manufacturer.
MATO GmbH & Co. KG
Benzstraße 16-24
63165 Mühlheim am Main, Deutschland
Login