Tyre-pressure technology valve connectors, tyre inflators & AutoAir pressure regulators for workshops
Professional tyre-pressure technology for car workshops – from PCL valve connectors (Euro Clip-on, One Clip pro) and analogue or digital hand-held tyre inflators through the stationary QUBE 2 automatic tyre inflator to the AutoAir II tyre-pressure regulator for cars and trucks. Calibratable solutions for tyre service and tyre inflation.
Valve connectors – the PCL range
Euro Clip-on (from €7.14) for standard car valves, One Clip pro (from €19.50) with a 360° swivel joint for maximum flexibility – straight and angled, with a 1/4" internal thread or a hose connection DN 6.5/8. Double-sided forecourt connector (from €14.50) for twin tyres and commercial vehicles.
Hand-held tyre inflators
The analogue hand-held tyre inflator AirForce, calibratable (€137) – 0–12 bar, a reading accuracy of 0.01 bar, max. 910 l/min. The digital ACCURA 1 PCL, calibrated (€150) – 0–12 bar, 1/4" internal thread, a 1.85 m hose. For mobile use on all vehicles in the workshop.
QUBE 2 – automatic tyre inflator
The QUBE 2 (€469) is a stationary, pre-programmable automatic tyre inflator – calibrated, with a 5 m smooth hose and a single clip-on connector. Preselect the target pressure, attach the connector, and the tyre inflates automatically to the chosen pressure and stops by itself.
AutoAir II – fully automatic pressure regulator
AutoAir II for cars (wall/stand, €2,328–2,484) and trucks (wall/stand, €2,328–2,484) – a fully automatic tyre-pressure regulator, calibratable, a 10 m coil hose (car) or a 15 m smooth hose (truck). Also available as a complete compressor set for cars (€4,798).
Compressed Air Plug Nipple DN 7.2 with 1/4" Male Thread
- Connection Thread: 1/4"
- Nominal Width: 7.4 mm
- Air Flow Rate: 2200 l/min
- Maximum Operating Pressure: 35 bar
Delivery time: 1-3 days
Tire Valve Connector Euro Clip-on Internal Thread ¼" PCL
- Connection: ¼“ Female Thread
- Type: Euro Clip-on
- Manufacturer: PCL
No longer available
Tire Valve Connector Euro Clip-on Hose Fitting DN 4.75 PCL
- Hose Connection: DN 4.75
- Type: Euro Clip-on
- Manufacturer: PCL
Delivery time: 1-3 days
Tire Valve Connector Euro Clip-on Hose Fitting DN 6.35 PCL
- Hose Connection: DN 6.35
- Type: Euro Clip-on
- Manufacturer: PCL
Delivery time: 1-3 days
Tire Valve Connector Double-Sided Gas Station Connector Open Design
- Open Design
- Connection Thread: 1/4" Female
- Optimal for Filling Dual Tires
Delivery time: 1-3 days
Tire Valve Connector One Clip for ¼" Female Thread PCL
- Connection Thread: 1/4" female thread
- Design: open
- Integrated 360° swivel joint for maximum flexibility
No longer available
Tire Valve Connector One Clip for Hose Connection DN 6.5 PCL
- Connection: Hose nozzle DN 6.5
- Mechanism: open design
- Integrated 360° swivel joint for maximum flexibility
Delivery time: 1-3 days
Tire Valve Connector One Clip for Hose Connection DN 8 PCL
- Connection: Hose nozzle DN 8
- Mechanism: open design
- Integrated 360° swivel joint for maximum flexibility
No longer available
Tire Valve Connector Double-Sided Gas Station Connector Open Design 6.35 mm
- Connection: Hose Tail 6.35 mm
- Mechanism: Open Design
- Compressed Air Connection: 1/4 inch
Delivery time: 1-3 days
Tire Valve Connector One Clip Pro A Internal Thread 1/4" PCL Angled Version
- Connection: 1/4" internal thread (female)
- Mechanism: Open design
- Integrated 360° swivel joint for maximum flexibility
Delivery time: 1-3 days
Tire Valve Connector One Clip for Hose Connection DN 8 PCL Angled Design
- Connection: Hose connection DN 8
- Mechanism: Angled open design
- Integrated 360° swivel joint for maximum flexibility
Delivery time: 1-3 days
Doppelseitiger Momentstecker offenes Ende, 1/4" IG
Lever Valve Connector for Standard Tire Valves
- Durable Lever
- Hose Connections DN8 (8 mm)
- Includes Replaceable Rubber Seal
Delivery time: 5-10 Tage
Turbo Plug Euro 6.35mm - Valve Core Removal Tool
- Connection: 6.35 mm (suitable for 1/4" tubing)
- Function: Valve core removal tool
Delivery time: 1-3 days
Analog Tire Inflator AirForce, Calibratable
- Filling Speed: up to 910 l/min
- Filling Range: 0-12 bar
- Reading Accuracy: precise up to 0.01 bar
- Max. Inlet Pressure: 15 bar
- Hose Length: Extra-large at 1.8 m
Delivery time: 5-10 Tage
Digitaler Handreifenfüller ACCURA 1 PCL
No longer available
QUBE 2 - Stationary Tire Inflator - Tire Inflation Machine - Tire Inflation Device
- Pre-programmable tire pressure
- 5 m smooth hose with single clip-on R1/4"
- Calibrated
Delivery time: 1-3 days
Electric Tire Pressure Regulator AutoAir II Car Wall-Mounted with 10m Spiral Hose
Delivery time: 2-5 days
AutoAir II Truck Wall-Mounted 15 m Smooth Hose Tire Pressure Regulator
- For trucks
- Calibratable
- Hose length: 15 m
- Maximum filling pressure: 10 bar
- Minimum/maximum compressed air supply: 12 - 16 bar
Delivery time: 3-4 weeks
AutoAir II Truck Stand 15m Smooth Hose
Delivery time: 2-5 days
Tire Pressure Regulator AutoAir II Car Model with 10m Spiral Hose
- For passenger cars
- Calibratable
- Maximum filling pressure: 5.5 bar
- Hose length: 10 m
- Compressed air supply min./max.: 7 - 16 bar
- Power consumption: 12 W
Delivery time: 3-4 weeks
Tire Pressure Regulator AutoAir II Compressor for Cars
- For passenger cars
- Calibratable
- Maximum filling pressure: 5.5 bar
- Hose length: 10 m
- Power consumption: 500 W
Delivery time: 3-4 weeks
The right tyre-pressure technology for your workshop
Valve connectors – which for which vehicle?
Euro Clip-on: the standard for all cars with a Schrader valve – simple clip-on. One Clip pro with a 360° swivel joint: for hard-to-reach valves, the hose does not twist. Angled: for narrow rims without straight valve access. Forecourt connector: for twin tyres on trucks/buses – both tyres at once.
Analogue or digital – hand-held tyre inflator?
AirForce analogue (€137): a rugged dial version, no battery, 0.01 bar reading accuracy, calibratable. ACCURA 1 digital (€150): a digital display, easy to read in poor lighting, calibrated. For tyre-pressure checking on the customer invoice: a calibrated device is required by law.
QUBE 2 – automatic inflation
Set the target pressure on the QUBE 2 (€469), attach the valve connector – the device inflates automatically to the set pressure and stops. Calibrated, a 5 m hose, ready to connect. Ideal for tyre workshops and quick service – saves time and prevents over- or under-inflation.
AutoAir II – car or truck?
Car: max. 5.5 bar, a 10 m coil hose. Truck: max. 10 bar, a 15 m smooth hose. Each as a wall unit or a free-standing stand unit. Both 230V, calibratable. Fully automatic: set the pressure, attach the connector, done.
Wall or stand?
Wall mounting: space-saving, a fixed location, no risk of tipping. Stand: free-standing, flexibly positionable, no wall connection needed. For defined tyre-service points: wall. For flexible placement or seasonal use: stand.
AutoAir II with a compressor
AutoAir II compressor set for cars (€4,798) with an integrated compressor – no separate compressed-air connection needed. Ideal for workshops without a central compressed-air supply or for separate tyre-service areas and outdoor stations.
Frequently asked questions about tyre-pressure technology
The right tyre-pressure technology for your workshop
Our specialist team advises you free of charge – on valve-connector types, the calibration requirement and the right inflation or regulating system for your tyre service.
☎ Call +49 36071 924340 Request a quote