Workshop Technology 7 areas for the car workshop, industry & fleet
Professional workshop technology for car repair shops, industrial workshops and fleets – from oil dispensing units and fluid management systems through tyre-pressure technology and hose reels to used-oil disposal and fuel extraction. Choose your category below or use the overview.
Fluidmanagementsysteme
Moderne Fluidmanagementsysteme zur kontrollierten Lagerung, Überwachung und Abgabe von Ölen und Betriebsstoffen.
Effiziente Geräte zur sicheren Absaugung von Kraftstoffen und Flüssigkeiten in Werkstatt und Servicebereich.
Professionelle Ölabgabegeräte für sauberes, präzises und komfortables Arbeiten in der Werkstatt.
Ölentsorger
Praktische Ölentsorger für die fachgerechte Aufnahme und Entsorgung von Altöl und Betriebsflüssigkeiten.
Schlauchaufroller
Robuste Schlauchaufroller für Ordnung, Sicherheit und komfortables Arbeiten in der Werkstatt.
Zuverlässige Reifendrucktechnik für präzises Prüfen und Befüllen von Reifen im täglichen Werkstatteinsatz.
What's behind the 7 workshop-technology categories?
Fluid management systems
Central oil supply systems for multi-bay workshops – fresh oil (engine, gear, hydraulic oil) is distributed from a drum or IBC via pumps, hose reels and meters directly to every lift bay. Saves canister handling, prevents mix-ups, documents consumption. Suitable for car workshops with 3–4 lifts or more. Systems from Samoa-Hallbauer, MATO, Pressol.
Oil dispensing units
Electric and air-operated oil pumps for dispensing engine, gear and hydraulic oil directly from a drum or IBC. Electric pumps for 230V operation in the workshop, air-operated pumps for compressed-air-supplied operation. With meter, dispensing hose and nozzle – for precise oil dispensing per vehicle. Manufacturers: Pressol, MATO, Samoa.
Oil disposal units
Mobile used-oil disposal units collect used oil directly at the vehicle during an oil change – by extracting from below or draining from above. Electric and air-operated extraction units, various container sizes (20–100 litres). The collected used oil is then pumped into larger disposal containers. Important: under the AwSV, used oil is hazardous to water – only commission certified disposal companies.
Fuel extraction
Fuel extraction units empty vehicle tanks safely and without residue – before repairs, after misfuelling or for decommissioning. Electric and hand pumps, ATEX-certified versions for explosion-hazard areas (petrol). Important: petrol extraction units must be suitable for EX zone 1 or 2 – do not use standard electric pumps for fuel.
Hose reels
Wall-mounted hose reels keep oil hoses, compressed-air hoses and water hoses tidy and always within reach – retracting automatically via a spring mechanism. Available in various versions: for oil and fuel (with shut-off tap and nozzle), for compressed air, for water and coolant. Hose lengths typically 10–20 m. Recommended for every lift bay in the workshop.
Tyre-pressure technology
PCL tyre-inflation systems for workshop and fleet – from the simple tyre valve connector to the stationary QUBE 2 tyre inflator (€469). PCL is the British industry standard for professional tyre-pressure technology with a ¼" quick coupling. Tyre valve connectors, hose connections and tyre inflators for cars, trucks and construction machinery. Accurate tyre pressure saves fuel and improves safety.
Workshop accessories
Small accessories for daily workshop use: 3/4" and 2" drum taps for oil and fuel drums, funnel sets in all sizes, measuring jugs, shaker pumps, blow guns, ball valves, suction probes for used-oil units, suction and pressure syringes. Also aluminium hose holders and drum adapters for various thread types. The small accessories needed every day in any workshop.
Tire Valve Connector Euro Clip-on Internal Thread ¼" PCL
- Connection: ¼“ Female Thread
- Type: Euro Clip-on
- Manufacturer: PCL
Delivery time: 1-3 days
Tire Valve Connector One Clip for ¼" Female Thread PCL
- Connection Thread: 1/4" female thread
- Design: open
- Integrated 360° swivel joint for maximum flexibility
Delivery time: 1-3 days
QUBE 2 - Stationary Tire Inflator - Tire Inflation Machine - Tire Inflation Device
- Pre-programmable tire pressure
- 5 m smooth hose with single clip-on R1/4"
- Calibrated
Delivery time: 1-3 days
Barrel Tap 3/4" and 2" 🛢️
- For: 3/4" and 2" connection
- Material: Plastic
- Design: 2-piece
Delivery time: 1-3 days
Tire Valve Connector One Clip for Hose Connection DN 8 PCL
- Connection: Hose nozzle DN 8
- Mechanism: open design
- Integrated 360° swivel joint for maximum flexibility
Delivery time: 1-3 days
Tire Valve Connector One Clip for Hose Connection DN 6.5 PCL
- Connection: Hose nozzle DN 6.5
- Mechanism: open design
- Integrated 360° swivel joint for maximum flexibility
Delivery time: 1-3 days
PIUSI Depuroil (Electric Oil Filtration Device) Mobile Oil Filtration and Transfer Unit
- Ideal for oil dialysis
- Compact
- Low noise
- Clogging indicator
- 5m cable
- Spiral hoses
- Supply hose length: 2m
- Suction side hose length: 2m
- Filter flow rate: 10 Mu
Delivery time: 1-3 days
2" Aluminum Barrel Tap 🚰
- Connection Size: 2 inches
- Functionality: Self-closing
- Operation: Spring-loaded button
- Material: Aluminum
- Applicable with: Oils, antifreeze, and much more
Delivery time: 1-3 days
Tire Valve Connector Double-Sided Gas Station Connector Open Design 6.35 mm
- Connection: Hose Tail 6.35 mm
- Mechanism: Open Design
- Compressed Air Connection: 1/4 inch
No longer available
Gear Oil Pump for Plastic Canister SRL 500-6 l/min 🌟
- Pumping Capacity (liters/stroke): 0.05 (approximately 6 liters/minute)
- Pumped Media: Oils up to SAE 140
- Application: 20-liter plastic canister
- Suction Tube Length: 500 mm
- Round Thread Drum Fitting: M 60 x 5 internal
No longer available
PIUSI Cylinder Pump Hand Pump for Oil
- Compatible with oil
- Capacity: 16 kg
- Includes spout
Delivery time: 2-5 days
Tire Valve Connector Double-Sided Gas Station Connector Open Design
- Open Design
- Connection Thread: 1/4" Female
- Optimal for Filling Dual Tires
Delivery time: 1-3 days
Tire Valve Connector One Clip Pro A Internal Thread 1/4" PCL Angled Version
- Connection: 1/4" internal thread (female)
- Mechanism: Open design
- Integrated 360° swivel joint for maximum flexibility
Delivery time: 1-3 days
Telescopic Suction Tube TR 2/1
- Extendable Length: 490-925 mm
- Compatibility: Hand Pumps
- Connection Thread: M 20 x 1.5 External
Delivery time: 5-10 Tage
ROTH Safety Transport Box 50 Liters – ADR/BAM Approved
- Filling Volume: 50 liters
- Material: HDPE (High-Density Polyethylene)
- External Dimensions (L × W × H): 280 × 400 × 625 mm
- Maximum Load Capacity: 30 kg
Delivery time: 1-3 days
Compressed Air Plug Nipple DN 7.2 with 1/4" Male Thread
- Connection Thread: 1/4"
- Nominal Width: 7.4 mm
- Air Flow Rate: 2200 l/min
- Maximum Operating Pressure: 35 bar
Delivery time: 1-3 days
Tire Valve Connector Euro Clip-on Hose Fitting DN 6.35 PCL
- Hose Connection: DN 6.35
- Type: Euro Clip-on
- Manufacturer: PCL
Delivery time: 1-3 days
Steel Suction Pipes for Pumps on Tanks MATO
- Connection Thread: 1"
- Compatibility: For 700 and 1000 L Tank
Delivery time: 5-10 Tage
Adapter 2" BSP Fine, Internal Thread x 2" TriSure Coarse, External Thread, Thread Adapter
- Thread Type 1: 2" BSP fine, female
- Thread Type 2: 2" TriSure coarse, male
Delivery time: 1-3 days
Fuel Extraction Device TankQuick Eco
- Suitable for gasoline, diesel, E85
- Usable capacity: 110 liters
- Flow rate: 7.5 liters per minute
- Compressed air connection: minimum 7 bar
Delivery time: 3-4 weeks
Robust Plastic Air Blow Gun - Ergonomic Pneumatic Blow Gun with Adjustable Airflow | Ideal for Daily Use |
- Compressed air connection: Internal thread 1/4"
- Airflow: 270 l/min
- Maximum input pressure: 10 bar
Delivery time: 1-3 days
Adapter for AdBlue® Hand Pump for 200L Plastic Drums, 2" BSP Fine x Mauser Coarse Thread
- Thread Type 1: 2" BSP fine, female
- Thread Type 2: Mauser coarse, male
Delivery time: 1-3 days
MATO Flexible Suction Probe for Waste Oil Equipment, Diameter 5 mm, Length 680 mm
- Diameter: 5 mm
- Length: 680 mm
- Excellent adaptability and durability
Delivery time: 5-10 Tage
2" Plastic Barrel Tap
- Material: High-quality plastic
- Thread size: 2"
- Usage: Extraction of fluids from horizontal barrels
- Specifically designed for high flow rates
Delivery time: 1-3 days
Frequently asked questions about workshop technology
Professional workshop technology for your operation
Our specialist team will advise you free of charge – on the right oil dispensing system, hose reel configuration, ATEX fuel extraction and the optimum fluid management for your workshop.
☎ Call +49 36071 924340 Request a quote