MATO EP 400-DS Electric Gear Pump, 230 V Pump Unit for Hydraulic, Engine and Gear Oils of Low to High Viscosity, approx. 22 l/min, 16 bar

MATO EP 400-DS Electric Gear Pump – 230 V Pump Unit for Hydraulic, Engine and Gear Oils of Low to High Viscosity, approx. 22 l/min, 16 bar

The MATO EP 400-DS is a self-priming electric gear pump unit for hydraulic, engine and gear oils of low to high viscosity with a flow rate of approx. 22 l/min (SAE 30, free outlet) and a maximum pressure of approx. 16 bar. The motor runs on 230 V, 50 Hz, 5.3 A and 0.75 kW (IP55); the threaded connections are R 3/4" on the delivery side and R 1" on the suction side, and the suction height is up to 2.5 m. The EP 400-DS combines a pressure switch, pressure relief system and protected on/off switch and is also suitable for hose reels and long delivery lines.

Product features

• Self-priming electric gear pump unit
• Pressure switch with pressure relief system and protected on/off switch
• Integrated bypass valve
• 3 m power cable
• For fluids of hazard class A3 with flash point above 55 °C

Technical data

• Manufacturer: MATO
• Manufacturer part number: 34 340 90
• EAN: 4016553434090
• Flow rate: approx. 22 l/min (SAE 30, free outlet)
• Maximum pressure: approx. 16 bar
• Electrical data: 230 V, 50 Hz, 5.3 A, 0.75 kW, IP55
• Suction height: up to 2.5 m
• Pump thread connection: R 3/4" (delivery side) / R 1" (suction side)
• Fluids: hydraulic, engine and gear oils of low to high viscosity, hazard class A3, flash point above 55 °C
• Control: pressure switch with pressure relief system and protected on/off switch
• Power cable: 3 m
• Weight: approx. 16.9 kg

Applications

• Oil dispensing in workshops, fleets, agriculture and industry
• Transferring hydraulic, engine and gear oils from drums and tanks
• Operation with hose reels and long delivery lines

Scope of delivery

• 1 × EP 400-DS electric gear pump unit with 3 m power cable

Notes

Disconnect from the mains when not in use. Technical data subject to change by the manufacturer.