Oil dispensing equipment for workshop, fleet & industry – manual & electric
The complete spectrum of fresh-oil dispensing – from the simple oil can through mobile compressed-air and electric pumps to the complete compact oil system with a 1,500-litre tank. From MATO, PIUSI, Samoa-Hallbauer and Tecalemit. With or without a meter, calibratable on request.
Hand tools & mobile dispensing
Oil cans and oil squirters (from €2.99) for the smallest quantities, the PIUSI cylinder hand pump (€114) and gear-oil pumps (€139–355). Mobile oil dispensing units MATO pneuMATO 24 L, Samoa DA-25/DA-70 and PIUSI Viscotroll 70/200 (€451–1,006) as wheeled solutions for small to medium-sized workshops.
Electric gear pumps EP (MATO)
MATO EP100, EP200, EP300 and EP400 electric gear-pump systems for 200 L drums and IBC containers (from €1,275) – 11 or 22 l/min, mobile or wall-mounted, with a 4 m or 10 m hose reel. A professional workshop solution for daily fresh-oil dispensing.
Stationary systems
pneuMATO 3 stationary for a 1000 L tank (€771), Lube-Station P-200/IBC, the Pressol 230V oil system (€862) – for permanently installed dispensing points with an ongoing fresh-oil requirement. Fresh-oil tank systems EP100/EP300 with a 1000 L tank (from €2,243) as a unified system with a tank and pump.
DrumMobil 200 & compact systems
Tecalemit DrumMobil 200 EP/PP with TMS smart (from €2,061), calibratable MID variants PPe/EPe (€3,899). Compact oil systems EZP 0.4/0.5 (from €3,032), fresh-oil islands for 2 × 200 L drums (from €6,385) and the Tecalemit compact system 1,500 L with a can-filling table (€4,530).
Oil Pump System Lube-Station IBC-1000 with DIGIMET E35
- Pressure Translation: 1:3
- Suitable for 1000 L IBC containers
- 4 m pressure hose DN12 or 10 m hose reel DN12
Delivery time: 5-10 Tage
MATO Electric Gear Pump System EP300-F Mobile for 200L Oil Drums with 4m Pressure Hose 🚚🛢️
- Flow rate: approximately 22 liters per minute (SAE30 with free flow).
- Maximum pressure: approximately 8 bar, suction height up to 2.5 meters.
- 4-meter pressure hose DN20 with DKR 3/4" union nut.
Delivery time: 2-5 days
Mobile Oil Pump System pneuMATO 3 for 200 L Oil Drums
- Pressure Ratio: 1:3
- Flow Rate: 18 liters per minute
- Suction Tube for 200-liter Drum
- Pressure Hose DN12 with 1/2" Union Nut
Delivery time: 5-10 Tage
MATO pneuMATO Oil Transfer Pump Wall-Mount for 200-Liter Oil Drums
- Pneumatic pump unit pneuMATO 1:3 with wall bracket
- Suction pipe with foot valve and suction hose DN 20, 2m
- For calibratable system with air measurement prevention unit
- Connection hose 1 m DN12 to hose reel
- Open hose reel with 10 m pressure hose DN 12
Delivery time: 5-10 Tage
MATO Electric Gear Oil Pump System EP100-IBC 🛢️
- Steel suction pipe with foot valve and suction strainer
- Mounting bridge with 2" TriSure adapter
- 4m pressure hose DN 12
- Drip tray with holder
Delivery time: 2-5 days
PIUSI Viscotroll 200/2 with Dispensing Nozzle, K400 Meter, and Pressure Switch Oil Dispensing Unit
- Cart for maximum mobility
- Flow rate: up to 9 L/min
- Nozzle: Easyoil K400 (including K400 meter)
- Pressure switch
- Bottom valve
- Inline valve
Delivery time: 2-5 days
Mobile Pump Set PM35 60:1 for 50 kg Drum Mounting SAMOA-Hallbauer
- Maximum Delivery Rate: 2 kg/min
- Air Connection: G 3/8″i
- Outlet Thread: G 3/8″i
- Air Pressure Range: min. 1.5 to max. 10 bar
- Max. Outlet Pressure: 600 bar
Delivery time: 2-5 days
PIUSI Viscotroll 200/2 PST K400 (automatic pressure shut-off) oil dispensing unit
- Maximum flow rate: 9 liters per minute
- Dispensing nozzle: EasK400 (with K400 meter)
- Automatic pressure shut-off
- Includes cart for enhanced mobility
Delivery time: 2-5 days
Oil Dispensing Unit LUBEMOBIL 70 S III, not calibrated
- Capacity: 50 liters
- Flow Rate: approximately 5 liters per minute
- Hose Length: 2.25 meters
- Air Pressure: 3 - 10 bar
- Operating Pressure: 2 bar
- Safety Valve: 2.2 bar
- Air Consumption: 160 liters per minute
Delivery time: 5-10 Tage
MATO Electric Gear Pump System EP100-F Mobile for Oil Drums with 4 m Pressure Hose 🚛🛢️
- Flow rate: approximately 11 liters per minute (SAE30 with free flow).
- Maximum pressure: approximately 8 bar, suction height up to 2.5 meters.
Delivery time: 2-5 days
Mobile Pump Set PM35 60:1 for 185 kg Drum Mounting
- Max. Delivery Rate: 2 kg/min
- Air Connection: G 3/8"i
- Output Thread: G 3/8"i
- Max. Output Pressure: 600 bar
- Air Pressure Range: min. 1.5 to max. 10 bar
Delivery time: 2-5 days
Oil Dispensing Device DrumMobil 200 EP Non-Calibratable (Flow Rate Min./Max. 1-15 l/min)
- Universal Transport Cart
- Electric Oil Pump
- Delivery Hose DN 12
- Handheld Flow Meter
Delivery time: 2-5 days
Oil Dispensing Device DrumMobil 200 EP, non-calibratable (Flow min./max. 0.5 - 19 l/min)
- Universal Transport Cart
- Load Capacity: 0.35 tons
- Electric Motor Oil Pump 230 V
- Discharge Hose DN 12 with a Length of 3.15 m
- Includes Manual Flow Meter
Delivery time: 2-5 days
Fresh Oil Tank System EP100 or EP300 with 1000 Liter Tank 🛢️✨
- Tank capacity: 1000 liters (double-walled, with level indicator)
- Flow rate: EP100 approximately 11 l/min, EP300 approximately 22 l/min
- Maximum pressure: approximately 8 bar
- Suction height: up to 2.5 m
Delivery time: 5-10 Tage
MATO Electric Gear Pump System EP400-electronic 🌟
- Voltage: 230 V
- Flow Rate: approx. 22 l/min
- Maximum Pressure: approx. 16 bar
- Suction Height: up to 2.5 m
- Thread Connection: R3/4" (Pressure Side) / R1" (Suction Side)
Delivery time: 2-5 days
MATO Electric Gear Pump System EP200-F Mobile for 200-Liter Oil Drums with 10 m Hose Reel 🛢️🔌
- Flow rate: approximately 11 l/min (SAE30 with free flow).
- Maximum pressure: approximately 16 bar, suction height up to 2.5 m.
Delivery time: 2-5 days
Oil Dispensing Unit LubeMobil 70 S3 with TMS Smart
- Usable Capacity: 60 liters
- Flow Rate: 5 liters/min
- TMS Smart Meter
- Includes Motor and Gearbox Oil Outlet
- Operating Pressure: 2.0 bar
Delivery time: 5-10 Tage
Professional Oil Dispenser DVP 80 Oil Filler
- Capacity: 80 liters
- Discharge hose: 1.5 meters
- Pressure gauge, safety valve
- Compressed air storage with display
Delivery time: 2-5 days
PIUSI Viscotroll 120/1 DC-PST 12 Volt (automatic pressure shut-off) oil dispensing unit
- Battery Charger: 230V
- Flow Rate: max. 6 l/min
- Nozzle: Easyoil with Pressure Switch
- Foot Valve
- Trolley for Mobility
Delivery time: 2-5 days
Compact Oil System EZP 0.4 ECONO with 1000L Tank Samoa-Hallbauer
- Electric Pump: EZP 0.4
- Flow Rate: approx. 9 l/min
- Filling Gun with Swivel Joint
- Gun Holder with Drip Tray
- Electronic Hand Flow Meter
Delivery time: 2-5 days
Oil Dispensing Unit LubeMobil 70 Se3 with TMS Smart (MID)
- Net Capacity: 60 liters
- Flow Rate: 5 liters per minute
- Operating Pressure: 2.0 bar
- Inlet Pressure: 3-10 bar
Delivery time: 5-10 Tage
PIUSI Viscotroll 120/1 DC-PST 12V K400 (automatic shut-off) Oil Dispensing Unit
- Battery Charger: 230V
- Flow Rate: max. 6l/min
- Oil Dispensing Nozzle: Easy K400
- Includes K400 Meter
- Automatic Pressure Shut-off
- Includes Bottom Valve
- Transport Cart for Mobility
Delivery time: 2-5 days
Oil Dispensing Unit DrumMobil 200 EP with TMS Smart Meter
- Universal Transport Cart
- Electric Gear Pump TZ 10
- Electric Smart Meter including Motors and Gear Oil Outlet
Delivery time: 5-10 Tage
Oil Dispensing Unit DrumMobil 200 PP with TMS Smart
- Universal Transport Cart
- Pneumatic Piston Pump
- Smart Meter including Motors with Gear Oil Drain
Delivery time: 5-10 Tage
The right oil dispensing device for your workshop
Occasional & manual
For occasional oil top-ups without a pump system: SW/S series oil squirter (€13.50) with a flexible or rigid metal tube, the PIUSI cylinder hand pump (€114) for 16 kg drums, or the SRL 500 gear-oil pump (€139, 6 l/min) for canisters.
Mobile dispensing – one to three oil types
For workshops without a fixed dispensing point, wheeled between lifting platforms: MATO pneuMATO 24 L (compressed air or hand pump, from €519), Samoa DA-25/DA-70 (from €513) or PIUSI Viscotroll 70 (€996) – compact, without elaborate installation.
Drum electric pump – several oil types daily
For daily fresh-oil dispensing from 200 L drums: MATO EP100/EP200 (11/22 l/min) mobile or EP300/EP400 wall-mounted – with a 4 m or 10 m hose reel. EP100-IBC for IBC containers. A clear system: EP100/300 = 11 l/min, EP200/400 = 22 l/min.
Stationary from a 1000 L tank
For car workshops with a high daily oil consumption and a fixed storage location: pneuMATO 3 stationary (€771) or fresh-oil tank system EP100/300 with a 1000 L tank (from €2,243) – a complete system, permanently installed, ready for immediate use.
With fluid management (TMS smart)
For digital consumption recording per mechanic and job: DrumMobil 200 EP/PP with TMS smart (from €2,061) – RFID user identification, all dispensing logged. MID-calibratable variants PPe/EPe (€3,899) for customer billing.
Compact system – several dispensing points
For larger workshops with several dispensing points: compact oil systems EZP 0.4/0.5 (from €3,032) with a 1000 L tank and a dispensing counter, or the fresh-oil island 22 EZP (from €6,385) for 2 × 200 L drums with two electric pumps and hose reels.
Frequently asked questions about oil dispensing equipment
The right oil dispensing device for your workshop
Our specialist team advises you free of charge – on oil type, viscosity, flow rate, mobility and the optimal overall solution for your operation.
☎ Call +49 36071 924340 Request a quote