How much collection volume must the tray have?

Under AwSV §24 at least the volume of the largest container. For 1×1000L IBC: min. 1000L. For 4×200L drums: min. 200L (largest individual container). Consult the Lower Water Authority for site-specific requirements.

What is the difference between PE, HDPE and polyethylene?

PE is the umbrella term, HDPE the denser, stiffer variant with a higher load capacity. Both are chemical-resistant against acids, alkalis and organic solvents. For spill pallets they are often used synonymously.

When do I need a PE tray instead of a steel tray?

PE for chemicals, acids, alkalis, AdBlue (attacks steel), chlorine- and halogen-containing substances. Steel for very high mechanical loads, high temperatures above 60°C, fire-protection requirements.

What does accessible from all sides mean?

The PE pallet allows forklift access from all four sides. Without this designation the tray is accessible from only two sides or not at all. For forklift operation be sure to look for a PE pallet or accessible from all sides.

Category · PE & HDPE spill pallets – WHG-compliant storage technology

PE spill pallets for small containers, drums, IBCs & shelving

Polyethylene spill pallets for the WHG-compliant placement of canisters, drums and IBC containers – from the flat 10-litre small-container tray to the 1,000-litre shelf tray with a grating. Chemical-resistant, UV-stable, low-maintenance. All made of PE / HDPE.

✅ 10 – 1,140 litres collection volume ✅ For small containers · drums · IBCs · shelving ✅ WHG / AwSV-compliant ✅ Chemical- & UV-resistant

Jump to: Small containers KWP-P pallet Mini HDPE Drum pallets IBC trays Shelf trays FAQ

Small-container & pallet trays

Flat spill pallets for canisters, containers and small quantities (10–109 L, from €68.96) plus KWP-P pallet trays (20–100 L, from €68.66) with or without a perforated grid – BAUER Südlohn type made of rugged PE, for indoor spaces and covered stores.

Drum pallets for 2–4 × 200 L drums

PE spill pallets type WP for two or four 200-litre drums (220–410 L, from €392) – with or without a PE pallet, accessible from all sides for forklifts. Load capacity up to 1,250 kg. Also available as an HDPE variant with a grating (220–450 L, from €489).

IBC container trays

PE spill pallets type WP for one or two 1,000 L IBC containers (from €1,273) – with or without a PE pallet, accessible from all sides. Also available as an HDPE variant with a grating for 1 IBC (1,100 L collection volume). For the WHG-compliant placement of heavy bulk containers.

Shelf trays with a PE insert

Shelf trays in 1765 mm, 2165 mm, 2665 mm and 3265 mm lengths – with a PE insert (240–1,000 L, from €1,201), optionally with a grating. For installation in hazardous-material shelving and the WHG-compliant storage of chemicals, oils and water-polluting liquids on the shelf.

Which PE spill pallet suits which application?

🧴

Canisters & small containers

For placing 5–30 L canisters, bottles and small containers: flat small-container spill pallets (10–109 L, from €68.96) – a low overall height (50–85 mm), a wide standing area (570–1300 mm). Ideal for indoor spaces, chemical stores and workshops without forklift access.

📦

Euro and industrial pallets

For products stored on standard Euro pallets (800×1200 mm) or industrial pallets: KWP-P pallet trays (20–100 L) in matching dimensions (600×400 to 1200×800 mm). With a perforated grid as a spacer or without – depending on the product's requirements.

🛢️

200 L steel drums & plastic drums

For one to four 200 L drums: PE trays type WP with a PE pallet (220–410 L, from €392) – accessible from all sides for forklifts, load capacity up to 1,250 kg. For 2 drums without forklift access: HDPE variant with a grating (240 L, from €489). Pay attention to a collection volume ≥ 10 % of the total volume.

🏭

IBC containers 1000 L

For the WHG-compliant placement of IBC containers: PE trays type WP for 1–2 IBCs (from €1,273) with or without a PE pallet, accessible from all sides. The collection volume of 10 % of the container contents (= 100 L per IBC) must be maintained. The HDPE variant with a grating (1,100 L, €1,106) offers the highest collection volume for a single IBC.

📚

Hazardous-material shelving

For retrofitting or the initial equipping of hazardous-material shelving: shelf trays with a PE insert (240–1,000 L) in four lengths (1765/2165/2665/3265 mm) – with a grating for the shelf level or without for the floor level. Match the dimensions to the existing shelving – the internal dimensions of the frame determine the right PE insert.

🔵

PE vs. steel – when PE?

PE spill pallets are ideal for chemicals, acids, alkalis and AdBlue®, which would attack steel. For diesel, heating oil and mineral oils, both materials work – PE is lower-maintenance (no rusting, no coating needed) and lighter. Steel spill pallets are more rugged under mechanical loading and sometimes cheaper for heavy loads.

Frequently asked questions about PE spill pallets

Under AwSV § 24, the collection volume must correspond at least to the volume of the largest container placed on it – or, where there are several containers of the same type, at least 10 % of the total volume, but at least the volume of the largest individual container. In practice: for 1 × 1,000 L IBC you need at least 1,000 L of collection volume. For 4 × 200 L drums (800 L total) you need at least 200 L (= the largest individual container). For indoor spaces without drainage to the outside, the responsible authority may set different requirements – always check with the Lower Water Authority.

PE (polyethylene) is the umbrella term for plastics made from ethylene monomers. HDPE (High Density Polyethylene) is a denser, stiffer and mechanically more robust variant – frequently used for spill pallets with higher load capacities and chemical resistance. Both materials are chemical-resistant against acids, alkalis, alcohols and many organic solvents. In everyday use “PE” and “HDPE” are often used synonymously for spill pallets – the products in this category are all made of chemical-resistant PE/HDPE.

A perforated grid or grating rests on top of the tray and lifts the containers (canisters, drums) off the tray floor. Advantages: containers do not stand in the leaked medium – corrosion and slipping hazards are reduced. Staff can immediately see when something has leaked (the tray floor is visibly clear or covered). When storing containers with a metal underside, the grating prevents direct contact with the medium. Without a grating, the tray is better suited to shelf levels or where the space taken up by the grating should be avoided.

“Accessible from all sides” means the PE spill pallet is fitted with a PE pallet under which a forklift or pallet truck can drive in from all four sides – no direction is blocked. This allows maximum flexibility when loading and unloading. Trays without this designation either have no pallet (they sit directly on the floor) or are accessible from only two sides. For forklift operation, be sure to look for “accessible from all sides” or “with a PE pallet”.

PE spill pallets are recommended for: chemicals, acids and alkalis (steel would corrode), AdBlue® / urea solution (attacks steel), chlorine- and halogen-containing substances, concentrated oxidising agents. Steel is better suited to: extremely high mechanical loads (heavy-duty areas), high temperatures (>60 °C permanently), areas with fire-protection requirements. For diesel, heating oil and lubricating oils both are suitable – PE is lower-maintenance (no rusting), steel is sometimes cheaper for large trays.

A spill pallet is designed for the deliberate placement of one or more containers – with a defined collection volume that meets the WHG minimum volume. A floor-protection tray (type BWP-PE) is a flat, large-area tray for broad applications – e.g. under machines, workstations or as large-area protection. It has a very low overall height and a high load capacity (up to 1,000 kg), but is not counted as a complete WHG collection space. You will find both types in this category.

The right PE spill pallet for your operation

Our specialist team advises you free of charge – on volume, dimensions, WHG requirements and the right version for your storage needs.

☎ Call +49 36071 924340 Request a quote

More storage technology & spill pallets

Floor-protection trays

Hazardous-material depot

GHS-compliant

🛢️

Hazardous-material storage container

WHG-certified

🔴

Hazardous-material collection container

PE spill pallets for small containers, drums, IBCs & shelving

Small-container & pallet trays

Drum pallets for 2–4 × 200 L drums

IBC container trays

Shelf trays with a PE insert

Filter products

Polyethylene Spill Containment Sump Type WP 2560x1350x510mm with PE Pallet for 8x 200L Drums or 2x 1000L IBCs 🛢️

Shelf Tray 2665x1315x440mm 1000 Liters with PE Insert and Grating 2700-3 📦

Shelving Tubs 3265x1315x385mm 1000 Liters with PE Insert 🛢️

Shelf Tray 3265x1315x195mm 240 Liters with PE Insert and Grating 3300-1 📦

Shelf Tray 3265x1315x270mm 540 Liters with PE Insert and Grate 3300-2 🛒

Shelf Tray 3265x1315x385mm 1000 Liters with PE Insert and Grating 3300-3 🛒