Accessories for forklift attachments Matching lids & castor sets from BAUER – for all container series
Original accessories from BAUER for tipping, chip, folding-bottom and silo containers – precisely matched to all common container series. 2-part and 4-part lids with a locking function for tipping containers BSK, NK, BK, GU, EXPO, BKC and more, as well as castor sets (polyamide and solid rubber) for making containers mobile without a forklift.
Lids – a precise fit for every container size
Every container has its matching lid – from small BSK 30 containers to the 5 m³ large-volume containers BKC 500. The lids are 2-part (most series) or 4-part (large and very wide containers) and can be opened on two sides or one side. When folded open, they latch in place so that the lid does not fall shut during filling.
What do I need a lid for?
Lids protect the container contents from weather, dust, splash water and contamination – important when bulk materials or chips are stored temporarily until disposal. With lockable versions (e.g. FB 1000 with a padlock), unauthorised access is additionally prevented. Lids are also mandatory when water-polluting bulk materials are stored outdoors.
Castor sets – move containers easily
Castor sets enable ground-level moving of tipping and chip containers without a forklift – by hand or push force. Available in polyamide (125, 350 and 450 kg per castor) for hard hall floors and solid rubber for softer floors and quieter operation. Choose the right castor material depending on the container size and operating conditions.
Original BAUER accessories
All lids and castor sets are original BAUER accessories and precisely matched to the respective container series – exact-fit mountings, correct installation dimensions, matched load capacities. When ordering, always state the container type, as lids do not fit universally. When in doubt, our specialist team advises which lid belongs to the respective container.
BAUER 2-Piece Galvanised Lid for Type AK 100, Opens on Two Sides, 1330 × 1595 × 70 mm
- Suitable for: type AK 100
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type AK 100
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type EXPO 1200, SK 1200, S4A 1200, Galvanised, Opens on Two Sides, 1730 × 1075 × 195 mm
- Suitable for: type EXPO 1200, SK 1200, S4A 1200
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type EXPO 1200, SK 1200, S4A 1200
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type EXPO 900, SK 900, S4A 900, Galvanised, Opens on Two Sides, 1275 × 1630 × 145 mm
- Suitable for: type EXPO 900, SK 900, S4A 900
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type EXPO 900, SK 900, S4A 900
Delivery time: 3-4 weeks
BAUER 4-Piece Lid for Type BK 150, Galvanised, Opens on Two Sides, 1340 × 1905 × 245 mm
- Suitable for: type BK 150
- Design: 4-piece
- Surface finish: galvanised
- 4-piece, galvanised
- Suitable for type BK 150
Delivery time: 3-4 weeks
BAUER 2-Piece Galvanised Lid for FB 1000, Lockable with Padlock, Opens on Two Sides, 1115 × 920 × 90 mm
- Suitable for: type FB 1000
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type FB 1000
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type GU 2000, SGU 200, Galvanised, Opens on Two Sides, 1475 × 1705 × 250 mm
- Suitable for: type GU 2000, SGU 200
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type GU 2000, SGU 200
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type DUO, Galvanised, Opens on One Side, One Lid per Container Trough, 1690 × 775 × 125 mm
- Suitable for: type DUO
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type DUO
Delivery time: 3-4 weeks
BAUER 4-Piece Lid for Type BK 200, Galvanised, Opens on Two Sides, 2155 × 1550 × 240 mm
- Suitable for: type BK 200
- Design: 4-piece
- Surface finish: galvanised
- 4-piece, galvanised
- Suitable for type BK 200
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type SB 1500-2000, Galvanised, Opens on Two Sides, 1790 × 980 × 90 mm
- Suitable for: type SB 1500-2000
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type SB 1500-2000
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type BKM 150, Galvanised, Opens on Two Sides, 1780 × 1595 × 260 mm
- Suitable for: type BKM 150
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type BKM 150
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type BSK 200, BSL 200, BSS 200, Galvanised, Opens on One Side, 1215 × 1985 × 60 mm
- Suitable for: type BSK 200, BSL 200, BSS 200
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type BSK 200, BSL 200, BSS 200
Delivery time: 3-4 weeks
BAUER Lid 4498-05-0800 (2-Piece, Galvanised), Suitable for EXPO 1700, Opens on Two Sides, 1730 × 1630 × 195 mm
- Suitable for: EXPO 1700 tipping skips
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for EXPO 1700 tipping skips
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type BKM 200, Galvanised, Opens on Two Sides, 1820 × 1595 mm
- Suitable for: type BKM 200
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type BKM 200
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type FB 1500-2000, Galvanised, Opens on Two Sides, 1715 × 990 × 90 mm
- Suitable for: type FB 1500-2000
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type FB 1500-2000
Delivery time: 3-4 weeks
BAUER Set of Polyamide Swivel and Fixed Castors 4509-01-0300, Ø 180 mm, Overall Height 225 mm, 850 kg per Castor
- Load capacity: 850 kg per castor
- Wheel diameter: 180 mm
- Overall height: 225 mm
- 2 swivel and 2 fixed castors made of polyamide
- One swivel castor with brake
Delivery time: 3-4 weeks
BAUER Lid 4498-06-0800 (4-Piece, Galvanised), Suitable for EXPO 2100, Opens on Two Sides, 1730 × 1875 × 195 mm
- Suitable for: EXPO 2100 tipping skips
- Design: 4-piece
- Surface finish: galvanised
- 4-piece, galvanised
- Suitable for EXPO 2100 tipping skips
Delivery time: 3-4 weeks
BAUER 4-Piece Lid for Type BKC 300, Galvanised, Opens on Two Sides, 2010 × 2105 × 180 mm
- Suitable for: type BKC 300
- Design: 4-piece
- Surface finish: galvanised
- 4-piece, galvanised
- Suitable for type BKC 300
Delivery time: 3-4 weeks
BAUER 4-Piece Lid for Type BKC 400, Galvanised, Opens on Two Sides, 2010 × 2105 × 330 mm
- Suitable for: type BKC 400
- Design: 4-piece
- Surface finish: galvanised
- 4-piece, galvanised
- Suitable for type BKC 400
Delivery time: 3-4 weeks
BAUER 4-Piece Lid for Type BKC 500, Galvanised, Opens on Two Sides, 2010 × 2105 × 590 mm
- Suitable for: type BKC 500
- Design: 4-piece
- Surface finish: galvanised
- 4-piece, galvanised
- Suitable for type BKC 500
Delivery time: 3-4 weeks
The right accessory for your container
Finding the right lid
Lids are container-specific – there is no universal lid. Every lid is precisely matched to a specific container type and size. The product designation always names the compatible container: e.g. "lid for type GU 500, SGU 50" fits the tipping container GU 500 and the chip container SGU 50. Before ordering, check the exact container type and size.
2-part, 4-part or 1-part?
2-part lid: two halves, open on one or two sides – standard for most containers. 4-part lid: four panels, for very wide or large containers (BK 150, EXPO 2100, BKC series) – easier to handle with large lid surfaces. 1-part lid: for SR/SRE containers, resting loosely and removable – the simplest design.
Opening on one side vs. two sides
One-sided: only one half can be opened – simpler construction, less expensive. For containers that are always filled from the same side. Two-sided: both halves can be opened independently – more flexibility when filling from different sides. For containers that have changing accessibility or are filled in tight space conditions.
Lid with padlock
Individual lid versions are equipped with a padlock opening (e.g. FB 1000 galvanised). This enables the container to be locked – important when the contents are to be protected from unauthorised access or when operational safety requirements prescribe a lockable container. The padlock itself is not included in the scope of delivery.
Polyamide or solid-rubber castors?
Polyamide castors: hard plastic, very load-bearing (up to 450 kg/castor), abrasion-resistant – ideal for smooth concrete floors and frequent use. Somewhat louder than rubber. Solid-rubber castors: softer, quieter, cushion impacts – better for uneven floors and areas with noise-protection requirements. Lower load capacity than polyamide. For heavy containers, always check the load capacity of the castor (125/350/450 kg) against the container weight plus filling.
Caution: the lid prevents stackability
With the stacking-tipper series (BSK 30/55/70/90/150/200), the fitted lid makes the container no longer stackable – the lid mountings on the top are occupied by the lid. Anyone who regularly stacks containers empty should remove the lid before stacking or stack containers without a lid and store the lid separately. With all other series (NK, BK, GU, EXPO, etc.), stackability is not affected.
Frequently asked questions about accessories for attachments
The right accessory for your BAUER container
Our specialist team advises you free of charge – on the right lid selection, castor-set load capacity and the optimal configuration for your container.
☎ Call +49 36071 924340 Request a quote