Accessories for forklift attachments Matching lids & castor sets from BAUER – for all container series
Original accessories from BAUER for tipping, chip, folding-bottom and silo containers – precisely matched to all common container series. 2-part and 4-part lids with a locking function for tipping containers BSK, NK, BK, GU, EXPO, BKC and more, as well as castor sets (polyamide and solid rubber) for making containers mobile without a forklift.
Lids – a precise fit for every container size
Every container has its matching lid – from small BSK 30 containers to the 5 m³ large-volume containers BKC 500. The lids are 2-part (most series) or 4-part (large and very wide containers) and can be opened on two sides or one side. When folded open, they latch in place so that the lid does not fall shut during filling.
What do I need a lid for?
Lids protect the container contents from weather, dust, splash water and contamination – important when bulk materials or chips are stored temporarily until disposal. With lockable versions (e.g. FB 1000 with a padlock), unauthorised access is additionally prevented. Lids are also mandatory when water-polluting bulk materials are stored outdoors.
Castor sets – move containers easily
Castor sets enable ground-level moving of tipping and chip containers without a forklift – by hand or push force. Available in polyamide (125, 350 and 450 kg per castor) for hard hall floors and solid rubber for softer floors and quieter operation. Choose the right castor material depending on the container size and operating conditions.
Original BAUER accessories
All lids and castor sets are original BAUER accessories and precisely matched to the respective container series – exact-fit mountings, correct installation dimensions, matched load capacities. When ordering, always state the container type, as lids do not fit universally. When in doubt, our specialist team advises which lid belongs to the respective container.
BAUER 2-Piece Lid for Type BSK 30, BSL 30, BSS 30, Galvanised, Opens on One Side, 815 × 585 × 35 mm
- Suitable for: type BSK 30, BSL 30, BSS 30
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type BSK 30, BSL 30, BSS 30
Delivery time: 3-4 weeks
BAUER Set of Polyamide Swivel and Fixed Castors 4509-01-0800, Ø 100 mm, Overall Height 125 mm, 125 kg per Castor
- Load capacity: 125 kg per castor
- Wheel diameter: 100 mm
- Overall height: 125 mm
- 2 swivel and 2 fixed castors made of polyamide
- One swivel castor with brake
Delivery time: 3-4 weeks
BAUER Lid 4412-01-0800 (2-Piece, Galvanised), Suitable for NK 30, Opens on Two Sides, 1175 × 870 × 125 mm
- Suitable for: NK 30 tipping skips
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for NK 30 tipping skips
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type BSK 55, BSL 55, BSS 55, Galvanised, Opens on One Side, 1015 × 785 × 35 mm
- Suitable for: type BSK 55, BSL 55, BSS 55
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type BSK 55, BSL 55, BSS 55
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type BK 30, Galvanised, Opens on Two Sides, 1060 × 815 × 220 mm
- Suitable for: type BK 30
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type BK 30
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type GU 500, SGU 50, Galvanised, Opens on Two Sides, 1300 × 805 × 240 mm
- Suitable for: type GU 500, SGU 50
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type GU 500, SGU 50
Delivery time: 3-4 weeks
BAUER Lid 4412-02-0800 (2-Piece, Galvanised), Suitable for NK 50, Opens on Two Sides, 1420 × 875 × 155 mm
- Suitable for: NK 50 tipping skips
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for NK 50 tipping skips
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type GU 300, SGU 30, Galvanised, Opens on Two Sides, 1300 × 705 × 240 mm
- Suitable for: type GU 300, SGU 30
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type GU 300, SGU 30
Delivery time: 3-4 weeks
BAUER 2-Piece Galvanised Lid for Type BK 50, Opens on Two Sides, 1340 × 815 × 240 mm
- Suitable for: type BK 50
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type BK 50
Delivery time: 3-4 weeks
BAUER Set of Solid Rubber Swivel and Fixed Castors 4509-01-1500, Ø 200 mm, Overall Height 235 mm, Set Capacity 615 kg
- Load capacity: 615 kg (castor set)
- Wheel diameter: 200 mm
- Overall height: 235 mm
- 2 swivel and 2 fixed castors made of solid rubber
- One swivel castor with brake
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type BKM 30, SKM 30, Galvanised, Opens on Two Sides, 1140 × 855 × 165 mm
- Suitable for: type BKM 30, SKM 30
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type BKM 30, SKM 30
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type BSK 70, BSL 70, BSS 70, Galvanised, Opens on One Side, 1215 × 785 × 35 mm
- Suitable for: type BSK 70, BSL 70, BSS 70
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type BSK 70, BSL 70, BSS 70
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type KW, SKW, KK, SKK 250, Galvanised, Opens on Two Sides, 1035 × 640 × 360 mm
- Suitable for: type KW, SKW, KK, SKK 250
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type KW, SKW, KK, SKK 250
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type BKM 50, Galvanised, Opens on Two Sides, 1510 × 855 × 160 mm
- Suitable for: type BKM 50
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type BKM 50
Delivery time: 3-4 weeks
BAUER 1-Piece Lid for Type SR, SRE, Galvanised, Loose-fitting, Removable, 1025 × 795 × 35 mm
- Suitable for: type SR, SRE
- Design: 1-piece
- Surface finish: galvanised
- 1-piece, galvanised
- Suitable for type SR, SRE
Delivery time: 3-4 weeks
BAUER Set of Polyamide Swivel and Fixed Castors 259470-350VK, Ø 180 mm, Overall Height 225 mm, Set Capacity 1000 kg
- Load capacity: 1000 kg (castor set)
- Wheel diameter: 180 mm
- Overall height: 225 mm
- 2 swivel and 2 fixed castors made of polyamide
- One swivel castor with brake
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type AK 50, Galvanised, Opens on Two Sides, 1330 × 855 × 70 mm
- Suitable for: type AK 50
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type AK 50
Delivery time: 3-4 weeks
BAUER 2-Piece Galvanised Lid for Type KN / SKN 400, 1350 × 890 × 185 mm
- Suitable for: type KN / SKN 400
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type KN / SKN 400
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type KW, SKW, KK, SKK 400, Galvanised, Opens on Two Sides, 1240 × 720 × 405 mm
- Suitable for: type KW, SKW, KK, SKK 400
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type KW, SKW, KK, SKK 400
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type VD 500, VG 550, Galvanised, Opens on One Side, 1185 × 790 × 170 mm
- Suitable for: type VD 500, VG 550
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type VD 500, VG 550
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type VD 650, VG 700, Galvanised, Opens on One Side, 1260 × 790 × 170 mm
- Suitable for: type VD 650, VG 700
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type VD 650, VG 700
Delivery time: 3-4 weeks
BAUER Lid 4412-03-0800 (2-Piece, Galvanised), Suitable for NK 75, Opens on Two Sides, 1675 × 1115 × 155 mm
- Suitable for: NK 75 tipping skips
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for NK 75 tipping skips
Delivery time: 3-4 weeks
BAUER 2-Piece Lid for Type BKM 75, Galvanised, Opens on Two Sides, 1780 × 855 × 260 mm
- Suitable for: type BKM 75
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type BKM 75
Delivery time: 3-4 weeks
BAUER 2-Piece Galvanised Lid for Type GU 750/SGU 75, Opens on Two Sides, 1300 × 1305 × 240 mm
- Suitable for: type GU 750/SGU 75
- Design: 2-piece
- Surface finish: galvanised
- 2-piece, galvanised
- Suitable for type GU 750/SGU 75
Delivery time: 3-4 weeks
The right accessory for your container
Finding the right lid
Lids are container-specific – there is no universal lid. Every lid is precisely matched to a specific container type and size. The product designation always names the compatible container: e.g. "lid for type GU 500, SGU 50" fits the tipping container GU 500 and the chip container SGU 50. Before ordering, check the exact container type and size.
2-part, 4-part or 1-part?
2-part lid: two halves, open on one or two sides – standard for most containers. 4-part lid: four panels, for very wide or large containers (BK 150, EXPO 2100, BKC series) – easier to handle with large lid surfaces. 1-part lid: for SR/SRE containers, resting loosely and removable – the simplest design.
Opening on one side vs. two sides
One-sided: only one half can be opened – simpler construction, less expensive. For containers that are always filled from the same side. Two-sided: both halves can be opened independently – more flexibility when filling from different sides. For containers that have changing accessibility or are filled in tight space conditions.
Lid with padlock
Individual lid versions are equipped with a padlock opening (e.g. FB 1000 galvanised). This enables the container to be locked – important when the contents are to be protected from unauthorised access or when operational safety requirements prescribe a lockable container. The padlock itself is not included in the scope of delivery.
Polyamide or solid-rubber castors?
Polyamide castors: hard plastic, very load-bearing (up to 450 kg/castor), abrasion-resistant – ideal for smooth concrete floors and frequent use. Somewhat louder than rubber. Solid-rubber castors: softer, quieter, cushion impacts – better for uneven floors and areas with noise-protection requirements. Lower load capacity than polyamide. For heavy containers, always check the load capacity of the castor (125/350/450 kg) against the container weight plus filling.
Caution: the lid prevents stackability
With the stacking-tipper series (BSK 30/55/70/90/150/200), the fitted lid makes the container no longer stackable – the lid mountings on the top are occupied by the lid. Anyone who regularly stacks containers empty should remove the lid before stacking or stack containers without a lid and store the lid separately. With all other series (NK, BK, GU, EXPO, etc.), stackability is not affected.
Frequently asked questions about accessories for attachments
The right accessory for your BAUER container
Our specialist team advises you free of charge – on the right lid selection, castor-set load capacity and the optimal configuration for your container.
☎ Call +49 36071 924340 Request a quote