Rietbergwerke LT-elh 400 Storage Tank (98657), Double-Walled 400 l Steel Tank for elh Liquids, DIN 6623-2, Dome Cover with 5 Sockets

Rietbergwerke LT-elh 400 / 600 / 995 Storage Tanks – Double-Walled Steel Tanks for elh Liquids, DIN 6623-2, Explosion-Pressure-Shock-Resistant

The Rietbergwerke LT-elh storage tanks are double-walled steel tanks for elh liquids with a flash point below 55 °C, e.g. petrol, and for other water-polluting liquids; this selection comprises the 400, 600 and 995 l sizes. All are manufactured to DIN 6623-2, hot-dip galvanised inside and out, explosion-pressure-shock-resistant and may be installed outdoors or indoors without an additional drip tray; only small clearances are needed between several tanks. The removable dome cover with 5 free threaded sockets takes fittings sets, overfill protection devices and pumps.

Product features

• Manufactured to DIN 6623-2 and therefore approved nationwide in Germany for storing elh liquids (flash point below 55 °C) and other water-polluting liquids
• Double-walled within the meaning of the German AwSV regulation, with permanent vacuum leak monitoring of both walls that needs no external power
• Approved for installation outdoors and indoors; storage without an additional drip tray or special containment room
• Only small clearances are required between tanks when several are installed side by side
• All-steel, hot-dip galvanised inside and out
• Sturdy, removable dome cover with 5 free threaded sockets (1 × 1½", 4 × 2"); all standard equipment such as overfill protection devices or heavy pumps can be fitted
• Explosion-pressure-shock-resistant design that withstands even an explosion inside the tank
• Permanently open vent line and easy-to-read dipstick for level checks
• Closed base frame for occasional in-house transport when empty by forklift or pallet truck
• Lifting eyes for safe crane handling according to DGUV Information 209-013

Technical data

• Manufacturer: Rietbergwerke
• Type / capacity: LT-elh 400, 600 and 995 (400 to 995 l)
• Medium: elh liquids (flash point below 55 °C) and other water-polluting liquids
• Approvals: DIN 6623-2
• Construction: double-walled within the meaning of the AwSV, vacuum leak monitoring of both walls, all-steel
• Material: steel, hot-dip galvanised inside and out; on request untreated inside and painted outside (any RAL colour) or in stainless steel
• Dimensions: 1000 × 1000 × 1100 mm (400), 1000 × 1000 × 1360 mm (600), 1250 × 1250 × 1450 mm (995), L × W × H
• Weight: 220 / 260 / 310 kg (manufacturer's figures)
• Height including vent line: 4 m above ground level
• Dome cover: removable, 5 free threaded sockets (1 × 1½", 4 × 2")
• Optional accessories: supply (98661) or disposal (98660) fittings set for LT-elh below 1,000 l, additional socket 2" I (83674) and II (83673), elh pressure sensor with ATEX approval for remote leak monitoring (76539)

Available versions

Applications

• Stationary storage of petrol and other elh liquids with a flash point below 55 °C in businesses, workshops and industry
• Supply or disposal tank in combination with the fittings sets 98661 or 98660
• Installation outdoors or indoors without an additional drip tray

Scope of delivery

• 1 × Rietbergwerke LT-elh storage tank in the selected size, hot-dip galvanised inside and out, with dome cover, vent line and dipstick

Notes

Fittings, overfill protection and pump are not included. The height including the vent line is 4 m above ground level for all sizes. The base frame is designed for occasional in-house transport when empty; according to the manufacturer a reinforced base frame for regular transport when empty is also available. Installation, operation and inspections must comply with the applicable regulations (including the German AwSV) and the manufacturer's instructions. Technical data subject to change by the manufacturer.