What is the difference between a syphon pump and a drum pump?

Syphon pumps are for canisters up to 30 litres. Drum pumps are for 200-litre steel drums with a longer immersion tube and flow rates up to 50 l/min.

Can I use a diesel hand pump for AdBlue?

No. AdBlue attacks standard NBR seals. Only pumps made from food-grade materials (PE, EPDM, PTFE) are suitable for AdBlue.

What does SRL mean for drum pumps?

SRL stands for suction tube length. For 200-litre drums you need an SRL of at least 860–900 mm.

Hand Pumps · Manual & Reliable

Hand Pumps for Fuels & Liquids no power required – usable anywhere

Q: Which hand pump is suitable for petrol?

Only ATEX-approved pumps with spark-free construction and suitable seal materials are permitted for petrol.

Manual pumps for diesel, heating oil, petrol, oils, AdBlue and chemicals – from the simple syphon pump to the robust lever drum pump. No power source required, ready for immediate use, for all common container sizes.

✅ No power or compressed air needed ✅ Diesel · Heating Oil · Oil · AdBlue ✅ Canisters · Drums · IBC ✅ Pressol · Jessberger · MATO

Jump to: Pump types Which pump suits me? FAQ

PIUSI Pompa a manovella Pro con tubo per contenitore IBC per soluzione di urea AdBlue®

PIUSI Crank Pump Pro with Hose for IBC, suitable for AdBlue® Urea Solution 🚛💧

Self-priming
Filling hose 2.5m
With stainless steel outlet
Max. flow rate: 38 liters per 100 rotations
Compatible media: urea, water, antifreeze

Delivery time: 1-3 days

€251.50*

€211.34 without VAT

Pompa per olio del cambio DV - Pompa per olio del cambio

Transmission Oil Pump DV - Transmission Oil Pump

16-liter capacity
1.5-meter dispensing hose
Shut-off valve with gear oil outlet
Pumping capacity approximately 0.12 liters per stroke

Delivery time: 1-3 days

€355.50*

€298.74 without VAT

Pompa per fusti MATO HP 202, portatile per fusti di olio da 50 a 60 litri.

MATO Barrel Pump HP 202, Mobile for 50 to 60 Liter Oil Drums 🛢️

Pumping Capacity: 200 cc/stroke
Includes 2-meter rubber hose with ball valve and drum adapter R2" with 40 mm inner diameter
Hand pump with high-quality steel pump mechanism and stable trolley for 50 to 60-liter drums
Suitable for: Hydraulic, motor, and gear oils, including high-viscosity lubricating oils

Delivery time: 5-10 Tage

€367.50*

€308.82 without VAT

Syphon & Shaker Pumps

Ideal for canisters and small containers from 5 to 30 litres. Simply insert into the opening and pump. For diesel, heating oil, oil and water.

5–30 L Canisters Entry level

Drum Pumps & Lever Pumps

For 200-litre steel drums – robust piston and lever pumps with flow rates up to 50 l/min. For diesel, heating oil, oils and fuels.

200 L drums Up to 50 l/min Lever

AdBlue® Hand Pumps

Special pumps made from food-grade materials (PE, EPDM) for urea solution 32.5%. For canisters and 200 L drums. Standard pumps are not suitable!

AdBlue PE / EPDM

ATEX Pumps & Pressure Sprayers

Spark-free pumps for petrol, 2-stroke mixture and other flammable liquids. Pressure sprayers for service and small quantities up to 750 ml.

ATEX Petrol EX-safe

Which hand pump suits which application?

🚜

Diesel & Heating Oil

For occasional transfers from canisters, a syphon pump is sufficient. For regular pumping from 200 L drums, a lever drum pump with higher flow rate is recommended.

🔧

Engine Oil & Hydraulic Oil

Oils are more viscous than fuels – piston drum pumps or lever pumps are suitable here, not syphon pumps. Check the transmission ratio and viscosity specifications.

💧

AdBlue® / Urea

Only use special AdBlue hand pumps made from PE, EPDM or PTFE. Urea solution attacks standard seals and can permanently damage the pump or contaminate the solution.

🔥

Petrol & Flammable Substances

Only use ATEX-approved pumps – spark-free construction, suitable seal materials. Standard diesel pumps are not permitted here.

⚗️

Chemicals & Acids

Pay attention to the seal material: NBR for mineral oils, EPDM for acids and bases, PTFE for aggressive media. The Jessberger JP-07 range is particularly versatile here.

📦

Container Size Matters

Syphon pumps for canisters (5–30 L), drum pumps for standard 200 L drums. Immersion depths and tube lengths differ – check the appropriate SRL specification.

Frequently Asked Questions about Hand Pumps

Syphon pumps are designed for canisters up to approx. 30 litres – compact, affordable, for occasional use. Drum pumps are designed for 200-litre steel drums, have a longer immersion tube, more robust construction and often significantly higher flow rates (up to 50 l/min).

No. AdBlue attacks standard NBR seals and contaminates the solution. For AdBlue, only pumps made from food-grade materials (PE, EPDM, PTFE) are suitable.

SRL stands for suction tube length – the length of the immersion tube inserted into the drum. For standard 200-litre drums (height approx. 850–900 mm), you need an SRL of at least 860–900 mm.

For petrol and 2-stroke mixture, only ATEX-approved pumps are permitted – spark-free construction and suitable seal materials. Look for the „EX" or „ATEX" label in the product name.

Syphon pumps: approx. 10–15 l/min. Piston drum pumps: approx. 15–20 l/min. Lever pumps: up to 50 l/min. For regularly larger quantities, an electric pump is recommended.

NBR for mineral oils, diesel and heating oil. EPDM for acids, bases, water, AdBlue. PTFE/Viton for aggressive chemicals and solvents. With Jessberger JP-07 pumps, the colour indicates the material: red = EPDM, blue = NBR.

Still unsure? We advise you free of charge!

Our specialist team helps you find the right hand pump for your medium and container.

Call 036071 924340 Request a quote

More pump categories

Fresh oil · Waste oil