- Mobile Fuel Stations
- Storage Tanks
- Fresh Oil Tank
- Pumps
- Fuel Dispensers
- Storage Technology
- Urea AUS32
- Sales Percentage
- Used Oil Equipment
- Workshop Technology
- Lubrication Systems
- Forklift Attachments
- Water Tank
-
Manufacturer
- Bauer - Südlohn
- Elaflex
- Flux
- GRACO
- Horn - Tecalemit
- Jessberger
- Kingspan
- Küco
- Mato
- Meva-Tec
- PIUSI
- Pressol
- Priorit
- Rietbergwerke
- Righetto Serbatoi
- Roth Werke
- RR-Industrietechnik
-
Samoa-Hallbauer
- AdBlue®
- Automatic Grease Guns
- Chemicals
- Dieselmatic
- Compressed Air Lubrication Equipment
- One-Handed Presses
- Liquid Management System
- Filling Equipment
- Filling Devices ZSA
- Manual Lever Press
- Compact Stereo System
- Plastic Tanks
- Storage
- Solvent Pumps
- Multipurpose Pumps
- Acid Measuring Container
- Measuring Jugs and Funnels
- The product category "Pumpmatic EZP" can be translated into natural, professional English as "Pumpmatic EZP Series."
- Vacuum and Filling Presses
- Hose Reel
- Grease Nipple
- Lubricant Dispenser
- Steel Tanks
- The term "Stosspressen" can be translated into English as "Forging Presses."
- Accessories
- Oil Equipment
- Schütz
- Swimer
- Tolsma Tanks
- MECLUBE
- Accessories
- Replacement Parts
- Guide
SAMOA Compact Oil Station EZP 0.4 ECONO, 1,000 l Tank with Electric Gear Pump, approx. 9 l/min
- Fluids: hydraulic, engine, gear, vegetable oils up to 700 cSt
- Flow rate: approx. 9 l/min
- Tank: 1,000 l
- Electric gear pump EZP 0.4, approx. 9 l/min
- 1,000 l tank
Delivery time: 2-5 days
SAMOA Mobile Grease Extrusion Unit PM35 60:1, for 12–20 kg Pails, Greases up to NLGI 3, without Hose and Gun
- Container: 12 to 20 kg pails
- Suitable greases: hard-to-pump, highly viscous greases up to NLGI 3
- Pump: PM35 60:1, on induction plate
- For hard-to-pump, sticky and highly viscous greases up to NLGI 3
- PM35 60:1 pump, lower pump end mounted on an induction plate
Delivery time: 2-5 days
SAMOA Mobile Grease Extrusion Unit PM35 60:1, for 12–20 kg Pails, Greases up to NLGI 3, with 3 m Hose and Grease Control Gun
- Container: 12 to 20 kg pails
- Suitable greases: hard-to-pump, highly viscous greases up to NLGI 3
- Pump: PM35 60:1, on induction plate
- For hard-to-pump, sticky and highly viscous greases up to NLGI 3
- PM35 60:1 pump, lower pump end mounted on an induction plate
Delivery time: 2-5 days
SAMOA Compact Oil Station EZP 0.5, 1,000 l Tank with Electric Gear Pump, approx. 10 l/min
- Fluids: hydraulic, engine, gear, vegetable oils up to 700 cSt
- Flow rate: approx. 10 l/min
- Tank: 1,000 l
- Electric gear pump EZP 0.5, approx. 10 l/min
- 1,000 l tank
Delivery time: 2-5 days
SAMOA Compact Oil Station EZP 0.4 BASIC, 1,000 l Tank with Dispensing Counter and Overfill Protection, approx. 9 l/min
- Fluids: hydraulic, engine, gear, vegetable oils up to 700 cSt
- Flow rate: approx. 9 l/min
- Tank: 1,000 l
- Electric gear pump EZP 0.4, approx. 9 l/min
- 1,000 l tank
Delivery time: 5-10 Tage
Personal Expert Consultation
- ✔️ Over 20 years of experience
- ✔️ Specialist retailer for tank technology
- ✔️ Spare parts & accessories available
- ✔️ Fast delivery
SAMOA Open Hose Reel RM-150, 15 m Hose 1 1/2" for Water and Diesel, max. 20 bar
- Fluids: water, diesel
- Delivery hose: 15 m hose 1 1/2"
- Working pressure: max. 20 bar
- 15 m hose 1 1/2", max. 20 bar
- Inlet/outlet 1 1/2" BSP (F)
Delivery time: 2-5 days
SAMOA Pumpmaster 60, Air-Operated Grease Piston Pump, 12:1 / 80:1
- Fluids: greases
- Pressure ratio: 12:1 / 80:1
- Pumpmaster 60 air-operated piston pump
- Ratio 12:1 / 80:1
- Air motor Ø 150 mm, stroke 100 mm
Delivery time: 2-5 days
SAMOA Pumpmaster 45, Air-Operated Grease Piston Pump, 650 mm Suction Tube for 50 kg drums, 40:1 / 70:1
- Fluids: greases
- Pressure ratio: 40:1 / 70:1
- Length: suction tube 650 mm
- Pumpmaster 45 air-operated piston pump
- Ratio 40:1 / 70:1
Delivery time: 2-5 days
SAMOA Pumpmaster 45, Air-Operated Grease Piston Pump, 855 mm Suction Tube for 185 kg drums, 25:1 / 40:1 / 70:1
- Fluids: greases
- Pressure ratio: 25:1 / 40:1 / 70:1
- Length: suction tube 855 mm
- Pumpmaster 45 air-operated piston pump
- Ratio 25:1 / 40:1 / 70:1
Delivery time: 2-5 days
SAMOA Air Operated Oil Pump PM45 6:1, Stub Pump, 200 mm Pump Tube, max. 95 l/min, 72 bar, ATEX
- Fluids: synthetic and mineral lubricants, hydraulic oil, gear oil
- Pressure ratio: 6:1
- Flow rate: 25 l/min at 80 cycles/min, max. 95 l/min
- Double-acting 6:1 stub pump for flange mounting
- 25 l/min at 80 cycles/min, max. 95 l/min, max. 72 bar
Delivery time: 2-5 days
Personal Expert Consultation
- ✔️ Over 20 years of experience
- ✔️ Specialist retailer for tank technology
- ✔️ Spare parts & accessories available
- ✔️ Fast delivery
SAMOA Air-Operated Oil Pump PM60 12:1, Stub Pump 200 mm, max. 65 l/min, max. 144 bar, ATEX
- Fluids: synthetic and mineral lubricants, hydraulic oil, gear oil
- Pressure ratio: 12:1
- Air pressure: 1.5–12 bar
- Ratio 12:1, air pressure 1.5–12 bar, max. outlet pressure 144 bar
- 20 l/min at 80 strokes/min, max. 65 l/min
Delivery time: 2-5 days
SAMOA Fresh Oil Island 22 DP3:1 SAG, Oil Dispensing Station for 2 x 200 l Drums with 2 x DP 3:1, enclosed 10 m Hose Reels
- Containers: 2 x 200 l drum
- Pump: 2 x air-operated pump DP 3:1 with suction unit
- Flow rate: approx. 12 l/min (depending on viscosity), single pump max. 30 l/min at free outlet
- Spill sump to WHG, 210 l, load capacity 760 kg
- 2 x air-operated pump DP 3:1 with suction unit, approx. 12 l/min
Delivery time: 2-5 days
SAMOA Air-Operated Oil Pump PM45 3:1, Stub Pump 200 mm, max. 120 l/min, max. 36 bar, ATEX
- Fluids: synthetic and mineral lubricants, hydraulic oil, gear oil
- Pressure ratio: 3:1
- Air pressure: 1.5–12 bar
- Ratio 3:1, air pressure 1.5–12 bar, max. outlet pressure 36 bar
- 45 l/min at 80 strokes/min, max. 120 l/min
Delivery time: 2-5 days
SAMOA Waste Oil Centre AZ DPM without Tank, without Overfill Protection, Waste Oil Collection Station with SAF-2 Sump
- Spill sump: SAF-2 safety sump on frame (working height)
- Control: oil level indicator type S with control electrics
- Tank: not included
- SAF-2 safety sump on frame at working height
- Tray for oily parts
Delivery time: 5-10 Tage
SAMOA Air-Operated Oil Pump PM60 6:1, Stub Pump 200 mm, max. 100 l/min, max. 72 bar, ATEX
- Fluids: synthetic and mineral lubricants, hydraulic oil, gear oil
- Pressure ratio: 6:1
- Air pressure: 1.5–12 bar
- Ratio 6:1, air pressure 1.5–12 bar, max. outlet pressure 72 bar
- 35 l/min at 80 strokes/min, max. 100 l/min
Delivery time: 2-5 days
Personal Expert Consultation
- ✔️ Over 20 years of experience
- ✔️ Specialist retailer for tank technology
- ✔️ Spare parts & accessories available
- ✔️ Fast delivery
SAMOA Fresh Oil Island 22 EZP SiAO, Oil Dispensing Station for 2 x 200 l Drums with 2 x EZP 0.5, open 10 m Hose Reels
- Containers: 2 x 200 l drum
- Pump: 2 x electric pump EZP 0.5 with suction unit
- Flow rate: approx. 10 l/min (depending on viscosity, free outlet), max. 25 bar
- Spill sump to WHG, 210 l, load capacity 760 kg
- 2 x electric pump EZP 0.5 with suction unit, approx. 10 l/min
Delivery time: 5-10 Tage
SAMOA Fresh Oil Island 22 EZP SAG, Oil Dispensing Station for 2 x 200 l Drums with 2 x EZP 0.5, enclosed 10 m Hose Reels
- Containers: 2 x 200 l drum
- Pump: 2 x electric pump EZP 0.5 with suction unit
- Flow rate: approx. 10 l/min (depending on viscosity, free outlet), max. 25 bar
- Spill sump to WHG, 210 l, load capacity 760 kg
- 2 x electric pump EZP 0.5 with suction unit, approx. 10 l/min
Delivery time: 5-10 Tage
SAMOA Fresh Oil Island 44 DP3:1 SiAO, Oil Dispensing Station for 4 x 200 l Drums with 4 x DP 3:1, open 10 m Hose Reels
- Containers: 4 x 200 l drum
- Pump: 4 x air-operated pump DP 3:1 with suction unit
- Flow rate: approx. 12 l/min (depending on viscosity), single pump max. 30 l/min at free outlet
- Spill sump to WHG, 210 l, load capacity 1,520 kg
- 4 x air-operated pump DP 3:1 with suction unit, approx. 12 l/min
Delivery time: 2-5 days
SAMOA Waste Oil Centre AZ DPM with 1,000 l Tank and Overfill Protection, Waste Oil Collection Station with DPM 1:1 Diaphragm Pump
- Spill sump: SAF-2 safety sump on frame (working height)
- Pump: air-operated diaphragm pump DPM 1:1, G 3/4", with solenoid valve
- Delivery hose: 4 m delivery hose to waste oil tank
- SAF-2 safety sump on frame with tray for oily parts
- DPM 1:1 G 3/4" air-operated diaphragm pump with solenoid valve
Delivery time: 5-10 Tage
SAMOA Fresh Oil Island 44 DP3:1 SiAG, Oil Dispensing Station for 4 x 200 l Drums with 4 x DP 3:1, enclosed 10 m Hose Reels
- Containers: 4 x 200 l drum
- Pump: 4 x air-operated pump DP 3:1 with suction unit
- Flow rate: approx. 12 l/min (depending on viscosity), single pump max. 30 l/min at free outlet
- Spill sump to WHG, 210 l, load capacity 1,520 kg
- 4 x air-operated pump DP 3:1 with suction unit, approx. 12 l/min
Delivery time: 2-5 days