Free shipping* on orders over €20
Call now +4936071924340
Opening hours Mon-Fri 8:00 a.m. - 5:00 p.m
Call now +4936071924340
Go to homepage
€0.00
Kategorie · Druckluft-SchmiergerĂ€te – Fettpressen & FĂŒllgerĂ€te fĂŒr 15 bis 200 kg

Druckluft-SchmiergerĂ€te Fettpressen, AbschmiergerĂ€te & FĂŒllpumpen fĂŒr 15 – 200 kg

Druckluft-SchmiergerĂ€te fĂŒr professionellen Einsatz in Werkstatt und Industrie – von kompakten pneuMATO-Aggregaten und Schmiermeister-AbschmiergerĂ€ten ĂŒber Hochleistungs-Fettpumpen PM35 (60:1, 600 bar) bis zu FettfĂŒllgerĂ€ten und LubeJet-SprĂŒhsystemen. FĂŒr Fetteimer von 15 bis 200 kg.

✅ Abschmieren & FĂŒllen ✅ 15 – 200 kg Fetteimer ✅ Bis 600 bar Ausgangsdruck ✅ MATO · Samoa · PIUSI
Direkt zu: Aggregate / Pumpen AbschmiergerĂ€te komplett FĂŒllgerĂ€te PM35 Hochleistung LubeJet & Spezial FAQ

Aggregate & AbschmiergerÀte

PIUSI P60:1 Booster (368 €) und MATO pneuMATO 55 Aggregate (ab 589 €) als reine Pumpenaggregate – fĂŒr 10–200 kg Fetteimer, 400–425 bar Betriebsdruck, 60:1 bzw. 55:1 DruckverhĂ€ltnis. Komplettsysteme Schmiermeister PM15/PM20/PM25/PM50/PM200 und Samoa PM20 ECONO (767–1.259 €) mit Eimer, Schlauch und MundstĂŒck.

FĂŒllgerĂ€te – Kartuschen befĂŒllen

pneuMATO-fill (ab 598 €) und DPZ-2/DPZ-3 FĂŒllmeister (901–1.033 €) fĂŒr das pneumatische UmfĂŒllen von Fett aus dem Eimer in Kartuschen, Zentralschmieranlagen oder Folgekolben-BehĂ€lter. Förderleistung bis 4.000 g/min bei 8 bar, DruckĂŒbersetzung 1:3 – fĂŒr schnelles, luftfreies BefĂŒllen.

PM35 – Hochleistungs-Fettpumpe

Die Samoa-Hallbauer PM35 (60:1, 600 bar max., 2 kg/min) ist die leistungsstĂ€rkste Druckluft-Fettpumpe im Sortiment – als Aggregat (1.163 €), Pumpenset fĂŒr 18/20 kg Gebinde (ab 1.285 €), mobile Förderdanlage (3.369 €) und tragbares Set (1.896 €). FĂŒr schwer zugĂ€ngliche Schmiernippel, festsitzendes Fett und Hochdruck-Schmierstellen.

LubeJet & UmfĂŒll-SpezialgerĂ€te

MATO pneuMATO 55 LubeJet (stationĂ€r 3.407 € / fahrbar 3.556 €) fĂŒr FettsprĂŒhschmierung mit Doppelschlauch und SprĂŒhkopf – fĂŒr Ketten, offene ZahnrĂ€der, Lager. Samoa PumpMaster 2 (756 €) als 1:1-UmfĂŒllset fĂŒr Fett zwischen Gebinden. Bucket Greaser fĂŒr 18/20 kg JOKEY-Gebinde (390 €).

Filter products

–
Pompa grasso pneumatica PIUSI P60:1 Booster

Compressed Air Grease Pump PIUSI P60:1 Booster

  • Drum size: 18 to 200 kg
  • Compression ratio: 60:1
  • Air pressure: 4-7 bar
  • Air consumption: 130-160 l/min
  • Air inlet connection: F.1/4"
  • Grease side connection: M.1/4"
  • Suction line diameter: 30 mm

Delivery time: 5-10 Tage

€367.95*
€309.20 without VAT
Details
Dispositivo di sgrassaggio ad alta pressione Bucket Greaser per secchio di grasso da 18 kg, Ø interno 265–285 mm

High-Pressure Greasing Device for 18/20 kg JOKEY Plastic Containers

  • For 18/20 kg JOKEY plastic containers
  • 2 m high-pressure safety armored hose with 4-jaw hydraulic gripping nozzle
  • Includes centering lid with special holding claws for optimal attachment to the JOKEY container (Jet 2000)
  • High-quality grease follower piston and robust suction tube with a diameter of 40 mm
  • Operating pressure: 400 bar / 1.6 ccm/stroke
  • Suitable for greases of NLGI class 000 - 2

Delivery time: 5-10 Tage

€390.00*
€327.73 without VAT
Lubrificatore pneumatico pneuMATO 55, unitĂ  per taniche di grasso da 10 a 25 kg

Pneumatic Lubrication Device pneuMATO 55, Unit for 10 to 200 kg Grease Buckets

  • Fat container capacity ranging from 10 to 200 kg
  • Pressure ratio: 1:55
  • Flow rate at free discharge: 500 g/min
  • Maximum operating pressure: 425 bar
  • Grease connection: R 1/4"
  • Suction tube diameter: 40 mm
  • Suitable for greases of NLGI grade 000-2

Delivery time: 5-10 Tage

€589.00*
€494.96 without VAT
Details
Dispositivo di riempimento pneumatico pneuMATO-fill Aggregato

Pneumatic Filling Device pneuMATO-fill Unit

  • Suction Tube Length: 525mm, 790mm, 940mm, 1490mm
  • Flow Rate: approximately 4,000 g/min at 8 bar inlet pressure
  • Pressure Performance: approximately 24 bar
  • Pressure Ratio: 1:3
  • Connection Thread: R1/2"

Delivery time: 5-10 Tage

€598.50*
€502.94 without VAT
Details
Pompe per grasso ad aria compressa "Serie PM"

Compressed Air Grease Pumps "PM Series"

  • Suitable for containers ranging from 10 to 185 kg
  • For greases up to consistency class 2
  • Transmission ratio of 1:55
  • Double-acting for consistent grease flow
  • Recommended compressed air range: 3 to 10 bar
  • Compressed air connection: G 1/4" internal

Delivery time: 5-10 Tage

€655.00*
€550.42 without VAT
Details
Lubrificatore pneumatico, kit pistola per grasso 60:1 per barili da 50–60 kg

Grease Gun Kit 60:1 60kg 420/400

  • Pressure Ratio: 60:1
  • Suction Tube Length: 750 mm
  • Drum Lid: Ø 420 mm
  • Grease Follower Plate: Ø 400 mm

Delivery time: 2-5 days

€745.23*
€626.24 without VAT
"PumpMaster 2" – set di trasferimento del grasso 1:1 SAMOA-Hallbauer

"PumpMaster 2" – 1:1 Grease Transfer Kit SAMOA-Hallbauer

  • 1:1 Transfer Kit
  • Suitable for 200-liter drums
  • Compressed Air Pump "PumpMaster 2" DP-F 1:1
  • Flow rate of 3 kg/min
  • Filling gun, ball valve with angled outlet
  • 3 m pressure hose, G 3/4"

Delivery time: 1-3 days

€756.00*
€635.29 without VAT
Dispositivo di lubrificazione Schmiermeister - PM 25 stazionario o mobile

Lubrication Device Lubrication Master - PM 25 Stationary or Mobile

  • For 25 kg fat bucket
  • Transmission ratio 1:55 for high delivery rate
  • Suitable for oils and greases up to consistency class 2, including bio-greases
  • Grease follower plate and steel dust protection cover for optimal hygiene and safety
  • Pneumatic connection G 1/4” internal, grease outlet G 1/4” internal
  • Air pressure minimum 3 bar, maximum 10 bar; maximum lubrication pressure 400 bar
  • Burst pressure 1,600 bar
  • Delivery rate approximately 600 g/min with free flow and 7 bar inlet pressure
  • Pump tube diameter 30 mm

Delivery time: 5-10 Tage

€767.50*
€644.96 without VAT
Details
MATO lubrificatore pneumatico pneuMato 55, fisso.

MATO Pneumatic Lubrication Device pneuMato 55, Stationary

  • For 10kg to 200kg fat buckets
  • NLGI grade 000 to 2
  • Pneumatic unit
  • High-pressure lubrication gun with linear swivel joint
  • Nozzle tube with 4-jaw hydraulic gripping mouthpiece

Delivery time: 5-10 Tage

€823.00*
€691.60 without VAT
Details
Lubrificatore ad aria compressa, kit di pompaggio per grasso 60:1 per tanica di grasso da 30 kg

Grease Gun Kit 60:1 30kg 320/310

Certainly! Below is the translation of the given product attribute value into natural, professional English, formatted with HTML `
  • ` and `
  • ` tags: ```html
    • Product Code: MC-013-1108-000
    ```

Delivery time: 2-5 days

€840.00*
€705.88 without VAT
Riempitrice pneumatica pneuMATO-fill 50-d, stazionaria, per secchio di grasso da 50 kg, Ø interno 355-387

Pneumatic Filling Device pneuMATO-fill, Stationary for 10 - 200 kg Grease Buckets

  • Pressure Ratio: 1:3
  • Compatible with 10 to 200 kg grease buckets
  • Flow Rate: approximately 4,000 g/min at 8 bar inlet pressure
  • Pressure Output: approximately 24 bar
  • Connection Thread: R1/2"

 

Delivery time: 5-10 Tage

€846.50*
€711.34 without VAT
Details
Lubrificatore pneumatico con kit di pompaggio per grasso 60:1, per secchio di grasso da 60 kg, portatile, azionato ad aria.

Grease Gun Kit 60:1 60kg 395/370

  • Pressure Ratio: 60:1
  • Suction Tube Length: 750 mm
  • Drum Lid Diameter: 395 mm
  • Grease Hose Length: 4 m, Inner Dimension 1/4"

Delivery time: 2-5 days

€880.00*
€739.50 without VAT
Riempitrice pneumatica pneuMATO-fill 50-m, trasportabile su ruote per secchi di grasso da 50 kg, Ø interno 355–387 mm

Pneumatic Filling Device pneuMATO-fill Mobile for 15-50 kg Grease Buckets

  • Fat container capacity: 15 to 50 kg
  • Delivery rate: approximately 4,000 g/min at 8 bar inlet pressure
  • Pressure output: approximately 24 bar
  • Pressure ratio: 1:3
  • Connection thread: R1/2"

Delivery time: 5-10 Tage

€896.50*
€753.36 without VAT
Details
"Riempitore ad aria compressa" DPZ-2 per NLGI da 000 a 0

Compressed Air "Filling Master" DPZ-2 for NLGI 000 to 0

  • For grease containers from 18 to 200 kg
  • Pumping capacity of 2 kg/min
  • Pressure ratio of 3:1
  • Air pressure from 2 to 10 bar
  • Pump tube diameter of 34 mm
  •  

Delivery time: 5-10 Tage

€901.50*
€757.56 without VAT
Details
Lubrificatore PM20 ECONO portatile con tubo da 2 m G1/4″ SAMOA-Hallbauer

Mobile Grease Gun PM20 ECONO with 2m Hose G1/4″ SAMOA-Hallbauer

  • Transport Cart
  • Compressed Air Connection G 1/4" internal
  • Grease Outlet G 1/4" internal
  • Maximum Lubrication Pressure: 400 bar
  • Burst Pressure: 1,600 bar
  • Air Pressure: Minimum 3 to Maximum 10 bar
  • Air Consumption: 230 l/min
  • Drum Fitting with 2" external thread
  • Pressure Regulator and Water Separator for Reduced Wear Operation
  • High Delivery Rate Due to 1:55 Gear Ratio
  • Suitable for Oils and Greases up to Consistency Class 2, including Bio-Greases (Multi-Purpose Greases)
  • Grease Follower Plate, Steel Dust Cover with Handle, 2 m Lubrication Hose
  • High-Pressure Grease Gun with Ball-Bearing Professional Z-Joint, Particularly Easy to Operate Under Pressure
  • Delivery Rate Approximately 550 g/min with Free Flow and 7 bar Inlet Pressure
  • Pump Tube Diameter: 28 mm at the Top, 41 mm at the Bottom

Delivery time: 5-10 Tage

€903.00*
€758.82 without VAT
Dispositivo di lubrificazione Schmiermeister - PM 200 stazionario o mobile

Lubrication Device Lubrication Master - PM 15/18 Stationary or Mobile

  • For 15 / 18 kg fat containers
  • Available with and without a trolley
  • Compressed air connection G 1/4" i, grease outlet G 1/4" i
  • Air pressure minimum 3 bar, maximum 10 bar
  • Maximum lubrication pressure 400 bar
  • Burst pressure 1,600 bar
  • Delivery rate approximately 600 g/min with free flow and 7 bar inlet pressure
  • Pump tube diameter 30 mm

Delivery time: 5-10 Tage

€930.50*
€781.93 without VAT
Details
Pompa di riempimento pneumatica pneuMATO-fill Dispositivo di riempimento per grasso per secchio da 20 kg pneuMATO-fill-20-d 285 - 305 mm

Pneumatic Filling Pump pneuMATO-fill Grease Filling Device for 10 to 200 kg

  • for fat containers ranging from 10 kg to 200 kg
  • pneumatic transfer pump with high delivery rate
     

Delivery time: 5-10 Tage

€935.00*
€785.71 without VAT
Details
Lubrificatore ad aria pneuMATO 55, mobile, con tubo ad alta pressione da 10 m DN6, per taniche di grasso da 18/20 kg, Ø interno 285–305 mm

Pneumatic Lubrication Device pneuMATO 55 Mobile

  • Pressure Ratio: 1:55
  • Flow Rate: 500 g/min with free discharge
  • Max. Operating Pressure: 425 bar
  • Suction Tube Diameter: 40 mm

Delivery time: 2-5 days

€949.50*
€797.90 without VAT
Details
Dispositivo di lubrificazione Schmiermeister - PM 200 stazionario o mobile

Lubrication Device Lubrication Master - PM 20 Stationary or Mobile

  • For 20kg fat containers
  • High delivery rate due to a gear ratio of 1:55, suction connection, and safety lubrication hoses with a large inner diameter.
  • Suitable for oils and greases up to consistency class 2, including bio-greases.
  • Equipped with a grease follower plate, steel dust cover, and high-pressure lubrication gun.
  • Compatible with 25kg fat containers.
  • Available as stationary (without trolley) or mobile (with trolley).
  • Features a compressed air connection G 1/4” i and grease outlet G 1/4” i.
  • Operates with a minimum air pressure of 3 bar and a maximum of 10 bar.
  • The maximum lubrication pressure is 400 bar, with a burst pressure of 1,600 bar.

Delivery time: 5-10 Tage

€950.50*
€798.74 without VAT
Details
Lubrificatore ad aria compressa — kit di pistola per grasso 60:1, per secchio di grasso da 60 kg, mobile a quattro ruote

Grease Gun Kit 60:1 60kg 420/400

  • Drum Size: Suitable for 50-60 kg drums
  • Suction Tube Length: 750 mm for deep immersion
  • Drum Lid: Ø 420 mm for secure sealing
  • Grease Hose: 1/4", 4 m length for extended reach

Delivery time: 2-5 days

€970.00*
€815.13 without VAT
Dispositivo di lubrificazione Schmiermeister - PM 200 stazionario o mobile

Lubrication Device Schmiermeister - PM 50 Stationary or Mobile

  • For 50kg grease container
  • Compressed air connection: G 1/4” internal
  • Grease outlet: G 1/4” internal
  • Air pressure: min. 3 bar, max. 10 bar
  • Lubrication pressure: max. 400 bar
  • Burst pressure: 1,600 bar
  • Delivery rate: approx. 600 g/min with free flow and 7 bar inlet pressure
  • Pump tube diameter: 30mm 

Delivery time: 5-10 Tage

€1,027.00*
€863.03 without VAT
Details
Riempitrice professionale ad aria compressa FĂŒllmeister DPZ-3/18/S

Professional Compressed Air Filling Device FĂŒllmeister DPZ-3/18/S

  • Delivery Rate: approximately 550 g/min
  • Pressure Ratio: 55:1
  • Suitable for Greases up to Consistency Class NLGI 2
  • Air Pressure: minimum 3 to maximum 10 bar

Delivery time: 2-5 days

€1,033.00*
€868.07 without VAT
Lubrificatore pneumatico pneuMATO 55, stazionario, per contenitori in plastica JOKEY da 18/20 kg

Pneumatic Lubrication Device pneuMATO 55 Stationary for 18/20 kg JOKEY Plastic Containers

  • Translation Ratio: 1:55
  • Hose Length: 3.5 m
  • High-Pressure Lubrication Hose: DN 6, R1/4"
  • Suitable for Greases of NLGI Grade 000 - 2

Delivery time: 5-10 Tage

€1,076.00*
€904.20 without VAT
Details
Lubrificatore pneumatico pneuMATO 75, unitĂ  per fusti di grasso da 200 kg

Pneumatic Lubrication Device pneuMATO 75, Unit for 10 kg to 200 kg Grease Buckets

  • For 10kg to 200kg fat buckets
  • Pressure ratio: 1:75
  • Flow rate with free discharge: 500 - 600 g/min
  • Max. operating pressure: 580 bar
  • Grease connection: R1/4"
  • Suction tube diameter: 40 mm
  • For greases of NLGI grade 000-2
  • Conditionally possible up to NLGI grade 000-3

Delivery time: 5-10 Tage

€1,153.00*
€968.91 without VAT
Details

Das richtige Druckluft-SchmiergerĂ€t fĂŒr Ihren Betrieb

🔧

Abschmieren an Schmiernippeln

FĂŒr den klassischen Schmierdienst an Kegelkopf-Nippeln DIN 71412: pneuMATO 55 Aggregat (589–823 €) oder Schmiermeister PM15–PM50 (767–1.027 €) – DruckverhĂ€ltnis 55:1 bzw. 60:1, 400–425 bar Ausgangsdruck, fĂŒr Standard-NLGI-Fette Klasse 1–3.

đŸ—ƒïž

Fetteimer-GrĂ¶ĂŸe bestimmt das GerĂ€t

15–20 kg: Schmiermeister PM15/PM18, Bucket Greaser, pneuMATO 55 JOKEY-stationĂ€r. 50 kg: Schmiermeister PM50, Fettpressenkit 60:1. 200 kg: Schmiermeister PM200, pneuMATO 55 (10–200 kg), PIUSI P60:1 Booster. SaugrohrlĂ€nge auf Eimerhöhe abstimmen.

📩

Kartuschen fĂŒllen – pneuMATO-fill

Fett gĂŒnstig in Eimern kaufen und Kartuschen selbst fĂŒllen: pneuMATO-fill (598–935 €) fĂŒllt Kartuschen pneumatisch bis 4.000 g/min, luftfrei. Senkt den Fettpreis bei großem Kartuschendurchsatz erheblich.

đŸ’Ș

Hochdruck – PM35 fĂŒr schwierige Stellen

Wenn Standard-Fettpumpen (400–425 bar) nicht reichen: Samoa PM35 60:1 (600 bar, 2 kg/min) – fĂŒr festsitzende Nippel, sehr zĂ€hes EP-Fett und lange Hochdruckleitungen in der Industrie.

💹

FettsprĂŒhschmierung – LubeJet

FĂŒr offene Ketten, ZahnrĂ€der und FĂŒhrungsschienen ohne Nippel: pneuMATO 55 LubeJet (ab 3.407 €) – SprĂŒhkopf mit 10m Doppelschlauch, fĂŒr Fette bis NLGI Klasse 2.

🔄

Fett umfĂŒllen – PumpMaster & FĂŒllmeister

Zwischen Gebinden umfĂŒllen: Samoa PumpMaster 2 (756 €, 1:1). FolgekolbenbehĂ€lter und Zentralschmieranlagen befĂŒllen: DPZ FĂŒllmeister (901–1.033 €, 55:1, 550 g/min).

HÀufige Fragen zu Druckluft-SchmiergerÀten

Ein AbschmiergerĂ€t erzeugt hohen Druck (400–600 bar) bei geringem Durchsatz – fĂŒr Schmiernippel. Ein FĂŒllgerĂ€t (pneuMATO-fill, DPZ) erzeugt niedrigeren Druck (24 bar) bei sehr hoher Förderleistung (bis 4.000 g/min) – fĂŒr schnelles, luftfreies UmfĂŒllen von Fett in Kartuschen, FolgekolbenbehĂ€lter und Zentralschmieranlagen.
Das DruckverhĂ€ltnis gibt an, wie stark der Eingangsdruck (Druckluft) in Ausgangsdruck (Fett) umgewandelt wird. Bei 60:1: 7 bar Eingangsdruck × 60 = 420 bar Ausgangsdruck. Bei 55:1: 7 bar × 55 = 385 bar. Standard-Schmiernippel benötigen 70–240 bar; 400+ bar bietet Reserve fĂŒr festsitzende oder verstopfte Nippel und sehr zĂ€hflĂŒssiges Fett.
NLGI-Klasse klassifiziert Fett nach Konsistenz: 000 (sehr flĂŒssig) bis 6 (sehr fest). Die meisten AbschmiergerĂ€te verarbeiten NLGI 1–3 (hĂ€ufigste Schmierfette). LubeJet und DPZ-2 verarbeiten NLGI 000–0 (sehr weich, fließfĂ€hig). Steife Fette ab NLGI 3 erfordern höheres DruckverhĂ€ltnis – PM35 (60:1) ist hier die bessere Wahl.
Sinnvoll wenn: Kartuschen fĂŒr Akku- oder Handfettpressen regelmĂ€ĂŸig aus Eimern nachgefĂŒllt werden (gĂŒnstigerer Fettpreis), FolgekolbenbehĂ€lter in Schmiersystemen befĂŒllt werden sollen, oder Fett schnell umgefĂŒllt werden muss. Die Förderleistung von 4.000 g/min (ca. 10 Kartuschen/Minute) macht das BefĂŒllen wesentlich schneller und sauberer als per Hand.
FettsprĂŒhschmierung verteilt Fett als feinen Schleier auf offene Gleit- und WĂ€lzflĂ€chen – Ketten, offene ZahnrĂ€der, FĂŒhrungsschienen, Drahtseile. Der pneuMATO 55 LubeJet kombiniert die Hochdruck-Fettpumpe pneuMATO 55 mit einem SprĂŒhkopf und 10m Doppelschlauch (Vor- und RĂŒcklauf). FĂŒr Fette bis NLGI Klasse 2 geeignet. StationĂ€re Variante fĂŒr feste SprĂŒhpositionen, fahrbare Variante fĂŒr flexiblen Einsatz.
Der Bucket Greaser (390 €) ist ein Hochdruck-AbschmiergerĂ€t speziell fĂŒr 18/20 kg JOKEY-Kunststoffgebinde (Jet 2000). Er wird mit Zentrierdeckel und Halteklauen direkt auf dem Gebinde befestigt und saugt das Fett ĂŒber einen Folgekolben (Durchmesser 40 mm) mit 400 bar Arbeitsdruck ab. Lieferumfang: 2m Hochdruck-Sicherheitspanzerschlauch mit 4-Backen-Hydraulik-GreifmundstĂŒck. Besonders geeignet fĂŒr Betriebe, die Fett in handlichen 18/20-kg-Kunststoffeimern beziehen.

Das passende Druckluft-SchmiergerĂ€t fĂŒr Ihren Betrieb

Unser Fachteam berĂ€t Sie kostenlos – zu GebindegrĂ¶ĂŸe, DruckverhĂ€ltnis, MobilitĂ€t und der richtigen Gesamtlösung fĂŒr Ihren Schmierdienst.

☎ 036071 924340 anrufen Angebot anfordern
Weitere Schmiersysteme
💹
Druckluft-SchmiergerÀte
Fettpumpen & FĂŒllgerĂ€te
🔋
Akku-Fettpressen
18V & 20V kabellos
🔌
Elektro-Fettpressen
230V stationÀr
✋
Handfettpressen
Ohne Strom & Druckluft
🏭
Fettzentralschmierung
Automatisch & stationÀr
đŸ”©
Fett-Zubehör
SchlÀuche & Nippel
ă€°ïž
Schlauchaufroller
Fett 400 bar
⚙
Ölpumpen
FĂŒr FĂ€sser & IBC
📊
Fluidmanagementsysteme
TMS smart
đŸ›ąïž
AltölgerÀte
Sammlung & Entsorgung
đŸ”©
Schmiersysteme
Alle Kategorien