TECALEMIT HDM 80 pro USB Diesel Dispenser with HDA pro Fuel Management Unit, Data Transfer via USB Stick, 80 l/min, 400 V

TECALEMIT HDM 80 pro Diesel Dispenser with Two-Point HDA pro Fuel Management Unit – 80 l/min, 400 V, Standard or MID Legal-for-Trade, USB, LAN or LTE (also pre-configured) Data Transfer

The TECALEMIT HDM 80 pro diesel dispenser is a 400 V dispenser with an integrated two-point HDA pro fuel management unit for diesel, GTL, HVO100 and R33. According to TECALEMIT, the self-priming gear pump block with gas separator and filter delivers up to 80 l/min (depending on viscosity and system) at a suction height of up to 4 m; the 4-piston meter with pulse generator measures to < 0.5 %, and fuel is dispensed via the A 2010 automatic nozzle on a DN 25 × 4 m hose. The HDA pro unit manages up to 2,000 users by transponder and/or PIN and stores 10,000 dispensing records; a second dispensing point (e.g. AdBlue®) and two tank probes for tank monitoring can be connected. The 8 versions combine standard or MID legal-for-trade design (approval DE-14-MI005-PTB027) with USB, LAN or LTE (also pre-configured) data transfer. In the USB version, dispensing data is retrieved at the fuel management unit with the supplied USB stick. The LAN and LTE modules transfer the dispensing data continuously to the myTecalemit web software. For LTE, TECALEMIT uses a SIM data card without follow-up costs for data communication, with fallback to GPRS (2G). For the pre-configured versions, TECALEMIT sets up to 100 drivers and 100 vehicles from the list the customer provides with the order, so the unit is delivered ready to use in myTecalemit. The powder-coated stainless steel housing (H 1425 × W 433 × L 557 mm, 90 kg) with drip tray and leak monitoring is TRbF-compliant; data is shown on an illuminated graphic display with 640 × 480 pixels, and on a TFT display in the MID versions.

Product features

• 400 V diesel dispenser with two-point HDA pro fuel management unit
• Standard or MID legal-for-trade (DE-14-MI005-PTB027)
• Data transfer USB, LAN or LTE (also pre-configured)
• HDA pro: up to 2,000 users, 10,000 records, 2 tank probes connectable
• Up to 80 l/min, A 2010 automatic nozzle, DN 25 × 4 m hose
• Gear pump with gas separator and filter, 4-piston meter with pulse generator, < 0.5 %
• Powder-coated stainless steel housing, TRbF-compliant, drip tray with leak monitoring
• For diesel, GTL, HVO100 and R33

Technical data

• Manufacturer: TECALEMIT
• Design: diesel dispenser HDM 80 pro with two-point HDA pro unit
• Data transfer: USB, LAN or LTE (also pre-configured)
• Flow rate: 80 l/min (depending on viscosity and system)
• Legal-for-trade status: standard or MID legal-for-trade
• MID approval: DE-14-MI005-PTB027; conformity assessment module F (2014/32/EU)
• Fluids: diesel, GTL, HVO100, R33
• Pump: self-priming gear pump with gas separator and filter
• Meter: 4-piston meter with pulse generator, < 0.5 %
• Voltage: 400 V / 50 Hz
• Drivers and vehicles: up to 2,000 users; pre-configuration: up to 100 each from the customer list
• Identification: transponder and/or PIN code; 2nd dispensing point and 2 tank probes connectable
• Memory: 10,000 dispensing records
• Display and controls: graphic display 640 × 480 pixels, illuminated; MID versions: TFT display
• Dispensing points: 1
• Delivery hose: DN 25 × 4 m
• Nozzle: A 2010 automatic nozzle
• Suction side: oval flange DN 40
• Suction height: up to 4 m
• Viscosity: 1–20 mPa·s
• Temperature range: ambient −25 to +55 °C, fluid −10 to +35 °C
• Dimensions: height 1425 mm, width 433 mm, length 557 mm
• Housing: powder-coated stainless steel; drip tray with leak monitoring (TRbF-compliant)
• Weight: 90 kg

Available versions

Applications

• Company fuelling stations in fleets, logistics, construction and agriculture with diesel, GTL, HVO100 and R33
• Refuelling where legal-for-trade metering under MID is required (MID versions)

Scope of delivery

• 1 × HDM 80 pro diesel dispenser with gear pump, 4-piston meter and two-point HDA pro unit; legal-for-trade status and data transfer depending on version
• DN 25 × 4 m hose with A 2010 automatic nozzle, hose holder
• USB versions: USB stick for data transfer
• Access to the myTecalemit basic module (free of charge)

Notes

The flow rate is a guide value from TECALEMIT and depends on viscosity and system. For legal-for-trade operation of the MID versions, a conformity assessment under module F (2014/32/EU) is required; according to TECALEMIT, the costs are charged by effort to the customer or installation partner. Technical data subject to change by the manufacturer.