Rietbergwerke MT-se 900 Multi-Tank, Painted RAL 7035, Double-Walled 900 l Storage Tank for se Liquids, Z-38.12-41

Rietbergwerke MT-se Multi-Tanks 900 to 2,400, Painted RAL 7035 – Double-Walled Storage Tanks for se Liquids, Z-38.12-41

The Rietbergwerke MT-se multi-tanks are double-walled steel storage tanks holding 900, 1,300, 2,000 or 2,400 l of se liquids with a flash point above 55 °C, such as fresh oil, diesel/heating oil or waste oil of known origin, offered here untreated inside and painted outside in RAL 7035. They hold the general building authority approval Z-38.12-41, are designed for waste oils up to an operating temperature of 95 °C and may be installed outdoors and indoors without an additional drip tray. The cubic design, only 800 mm wide, is easy to bring into buildings; pumps and other equipment can be mounted directly on the 500 mm dome with 6 free 2" threaded sockets.

Product features

• General building authority approval Z-38.12-41 as a storage tank for se liquids (flash point above 55 °C) and other water-polluting liquids
• For waste oils up to an operating temperature of 95 °C
• Double-walled within the meaning of the German AwSV regulation, with permanent vacuum leak monitoring of both walls that needs no external power
• Approved for installation outdoors and indoors; storage without an additional drip tray or special containment room
• Only small clearances are required between tanks when several are installed side by side
• Cubic, narrow design for optimum use of space and easy installation in buildings and through doors
• All-steel, untreated inside and painted outside in RAL 7035 for indoor installation; paint finish for outdoor installation available as an accessory (98786)
• Dome with 500 mm diameter and 6 free 2" threaded sockets; pumps and other equipment can be mounted directly on the removable dome cover
• Continuous, mechanical and easy-to-read level gauge
• Lifting eyes for transport when empty and safe crane handling according to DGUV Information 209-013; closed base frame for in-house transport when empty by forklift or pallet truck

Technical data

• Manufacturer: Rietbergwerke
• Type / capacity: MT-se 900 / 1,300 / 2,000 / 2,400
• Medium: se liquids (flash point above 55 °C, e.g. fresh oil, diesel/heating oil or waste oil of known origin) and other water-polluting liquids
• Operating temperature: waste oils up to an operating temperature of 95 °C
• Approvals: general building authority approval Z-38.12-41 (DIBt) as a storage tank
• Construction: double-walled within the meaning of the AwSV, vacuum leak monitoring of both walls, all-steel
• Finish: untreated inside, painted outside in RAL 7035 (for indoor installation)
• Dimensions: 900: 1200 × 800 × 1290 mm; 1,300: 1200 × 800 × 1750 mm; 2,000: 1800 × 800 × 1750 mm; 2,400: 2200 × 800 × 1750 mm (L × W × H)
• Weight: 200 / 260 / 370 / 420 kg (manufacturer's figure)
• Openings: dome Ø 500 mm with 6 free 2" threaded sockets; sturdy, removable dome cover for mounting pumps and other equipment directly
• Level check: continuous mechanical level gauge
• Lifting: lifting eyes for transport when empty and safe crane handling according to DGUV Information 209-013; closed base frame for in-house transport when empty by forklift or pallet truck
• Optional accessories: paint finish for outdoor installation (98786)

Available versions

Applications

• Storing fresh oil, diesel and heating oil in workshops, fleets, agriculture and industry
• Collecting waste oil of known origin up to an operating temperature of 95 °C
• Indoor installation without an additional drip tray, even where space is limited

Scope of delivery

• 1 × Rietbergwerke MT-se multi-tank in the selected size, untreated inside, painted outside RAL 7035, with Ø 500 mm dome and mechanical level gauge

Notes

The standard RAL 7035 paint finish is intended for indoor installation; for outdoor installation the manufacturer offers a paint finish as an accessory (98786). The base frame is designed for transport when empty; for regular transport of the filled tank there is the MT-M-se version, and for flood zones the separate MT-Ü-se version. Installation, operation and inspections must comply with the applicable regulations (including the German AwSV) and the manufacturer's instructions. Technical data subject to change by the manufacturer.