Rietbergwerke LT-B-elh 400 Storage Tank, Double-Walled 400 l Tank for elh Liquids, DIN 6623-2, Galvanised

Rietbergwerke LT-B-elh 400 Storage Tank – Double-Walled 400 l Tank for elh Liquids, DIN 6623-2, Galvanised

The Rietbergwerke LT-B-elh 400 storage tank (part no. 71343) is a double-walled steel tank, hot-dip galvanised inside and out, holding 400 l of elh liquids with a flash point below 55 °C. It is manufactured to DIN 6623-2 and therefore approved nationwide in Germany for storing elh liquids and other water-polluting liquids, both outdoors and indoors. The tank measures 1000 × 1000 × 1100 mm (L × W × H) and weighs 220 kg according to the manufacturer; including the vent line the height is 4 m above ground level. In the LT-B-elh version it has an inspection opening of 120 mm diameter with blind cover, a free pipe socket 2" male thread and two free threaded sockets (1 × 1", 1 × 2") for equipment as required.

Product features

• Manufactured to DIN 6623-2 and approved nationwide in Germany for storing elh liquids (flash point below 55 °C) and other water-polluting liquids
• Double-walled within the meaning of the German AwSV regulation, with permanent vacuum leak monitoring of both walls that needs no external power
• Approved for installation outdoors and indoors; storage without an additional drip tray or special containment room
• Only small clearances are required between tanks when several are installed side by side
• All-steel, hot-dip galvanised inside and out
• LT-B-elh version: inspection opening 120 mm diameter with blind cover, 1 free pipe socket 2" male thread and 2 free threaded sockets (1 × 1", 1 × 2")
• Explosion-pressure-shock-resistant design that withstands even an explosion inside the tank
• Permanently open vent line and easy-to-read dipstick for level checks
• Closed base frame for occasional in-house transport when empty by forklift or pallet truck
• Lifting eyes for safe crane handling according to DGUV Information 209-013

Technical data

• Manufacturer: Rietbergwerke
• Manufacturer part number: 71343
• Type / capacity: LT-B-elh 400, 400 l
• Medium: elh liquids (flash point below 55 °C) and other water-polluting liquids
• Approvals: DIN 6623-2
• Construction: double-walled within the meaning of the AwSV, vacuum leak monitoring of both walls, all-steel
• Material: steel, hot-dip galvanised inside and out
• Dimensions: 1000 × 1000 × 1100 mm (L × W × H)
• Height including vent line: 4 m above ground level
• Weight: 220 kg (manufacturer's figure)
• Openings: inspection opening 120 mm diameter with blind cover, 1 free pipe socket 2" male thread, 2 free threaded sockets (1 × 1", 1 × 2"), vent line
• Level check: dipstick
• Explosion protection: explosion-pressure-shock-resistant
• Lifting: lifting eyes according to DGUV Information 209-013; closed base frame for occasional transport when empty
• Optional accessories: supply fittings set for LT-B-elh (98853), disposal fittings set for LT-B-elh (98854), additional socket 2" I (83674) and II (83673), elh pressure sensor for remote leak monitoring (76539)

Applications

• Stationary storage of elh liquids with a flash point below 55 °C in industry, workshops and businesses
• Supply or disposal tank in combination with the fittings sets 98853 or 98854
• Installation outdoors or indoors without an additional drip tray

Scope of delivery

• 1 × LT-B-elh 400 storage tank (71343), hot-dip galvanised inside and out, with inspection opening and blind cover, vent line and dipstick, without fittings set

Notes

Fittings, overfill protection and pump are not included; the manufacturer offers the supply (98853) and disposal (98854) fittings sets as well as overfill protection devices as accessories. The height including the vent line is 4 m above ground level. Installation, operation and inspections must comply with the applicable regulations (including the German AwSV) and the manufacturer's instructions. Technical data subject to change by the manufacturer.