Rietbergwerke MS-TP-elh 900 Multi-Collector, Painted RAL 7035, Double-Walled 900 l Collecting Tank for elh Liquids, Z-38.12-41

Rietbergwerke MS-TP-elh 900, 1300, 2000 and 2400 Multi-Collectors, Painted RAL 7035 – Double-Walled Collecting Tanks 900 to 2,400 l for elh Liquids, Z-38.12-41

The Rietbergwerke MS-TP-elh 900, 1300, 2000 and 2400 multi-collectors are double-walled steel collecting tanks for elh liquids with a flash point below 55 °C, such as waste oil of unknown origin or petrol, offered here in the version untreated inside and painted outside in RAL 7035 (light grey). They hold the general building authority approval Z-38.12-41 issued by the DIBt, are designed for waste oils up to an operating temperature of 95 °C and are explosion-pressure-shock-resistant. The cubic design, only 800 mm wide, is easy to move through doors; filling is via a 400 mm funnel with shut-off ball valve and self-closing pedal-operated lid.

Product features

• General building authority approval Z-38.12-41 (DIBt) as a storage tank for elh liquids (flash point below 55 °C) and other water-polluting liquids
• For waste oils up to an operating temperature of 95 °C
• Double-walled within the meaning of the German AwSV regulation, with permanent vacuum leak monitoring of both walls that needs no external power
• Approved for installation outdoors and indoors; storage without an additional drip tray or special containment room
• Only small clearances are required between tanks when several are installed side by side
• Cubic, narrow design for optimum use of space and easy handling through doors
• All-steel, untreated inside and painted outside in RAL 7035 light grey for indoor installation; C3 paint finish for outdoor installation available as an accessory (98786)
• 400 mm filling funnel with manual shut-off ball valve and self-closing, pedal-operated lid
• Explosion-pressure-shock-resistant design that withstands even an explosion inside the tank
• Built-in hydraulic overfill protection, easy-to-read dipstick and permanently open vent line
• Suction line with lockable safety screw connection and 1 spare socket G 1¼", e.g. for an additional filling line or overfill protection device
• Closed base frame for occasional in-house transport when empty by forklift or pallet truck
• Lifting eyes for safe crane handling according to DGUV Information 209-013

Technical data

• Manufacturer: Rietbergwerke
• Type / capacity: MS-TP-elh 900, 1300, 2000 and 2400 (900 to 2,400 l)
• Medium: elh liquids (flash point below 55 °C, e.g. waste oil of unknown origin or petrol) and other water-polluting liquids
• Operating temperature: waste oils up to 95 °C
• Approvals: general building authority approval Z-38.12-41 (DIBt)
• Construction: double-walled within the meaning of the AwSV, vacuum leak monitoring of both walls, all-steel
• Finish: untreated inside, painted outside in RAL 7035 light grey (for indoor installation)
• Dimensions: 1200 × 800 × 1480 mm (900), 1200 × 800 × 1940 mm (1300), 1800 × 800 × 1940 mm (2000), 2200 × 800 × 1940 mm (2400) (L × W × H)
• Height including vent line: 2.5 m above ground level
• Weight: 200 / 350 / 460 / 510 kg (manufacturer's figure)
• Filling funnel: 400 mm, manual shut-off ball valve, self-closing pedal-operated lid
• Overfill protection: built-in hydraulic overfill protection
• Level check: dipstick
• Connections: permanently open vent line, suction line with lockable safety screw connection, 1 spare socket G 1¼"
• Explosion protection: explosion-pressure-shock-resistant
• Lifting: lifting eyes according to DGUV Information 209-013; closed base frame for occasional transport when empty
• Optional accessories: operator platform MS I (72125) for MS 900, MS II (84964) for MS 1300 to 2400; vent hood Ex (47822); C3 paint finish for outdoor installation (98786)

Available versions

Applications

• Collecting waste oil of unknown origin in workshops, fleets and industrial plants
• Collecting and storing petrol and other elh liquids with a flash point below 55 °C
• Installation outdoors or indoors without an additional drip tray

Scope of delivery

• 1 × Rietbergwerke MS-TP-elh multi-collector in the selected size, painted RAL 7035, with filling funnel, overfill protection, dipstick, vent line and suction line, without operator platform

Notes

The standard RAL 7035 paint finish is designed for indoor installation; for outdoor installation the manufacturer specifies the C3 paint finish (98786). The height including the vent line is 2.5 m above ground level; the operator platform is an optional accessory. Installation, operation and inspections must comply with the applicable regulations (including the German AwSV) and the manufacturer's instructions. Technical data subject to change by the manufacturer.