Rietbergwerke GD-TP-elh 250 Hazardous Substance Depot, Double-Walled 250 l Collecting and Storage Tank for elh Liquids, Z-38.12-288, Galvanised

Rietbergwerke GD-TP-elh Hazardous Substance Depots 250 to 995 l – Double-Walled Collecting and Storage Tanks for elh Liquids, Z-38.12-288

The Rietbergwerke GD-TP-elh hazardous substance depots are double-walled steel collecting and storage tanks for elh liquids with a flash point below 55 °C, such as waste oil of unknown origin or petrol, available in 250, 400, 600 and 995 l sizes. They hold general building authority approval Z-38.12-288, are hot-dip galvanised inside and out, explosion-pressure-shock-resistant and may be installed outdoors or indoors without a drip tray. Filling is via a 300 mm funnel with foot pedal and self-closing lid; hydraulic overfill protection, dipstick, vent line and a lockable suction line are part of the equipment.

Product features

• General building authority approval Z-38.12-288, approved nationwide in Germany for storing elh liquids (flash point below 55 °C) and other water-polluting liquids
• Double-walled within the meaning of the German AwSV regulation, with permanent vacuum leak monitoring of both walls that needs no external power
• Approved for installation outdoors and indoors; storage without an additional drip tray or special containment room
• Only small clearances are required between tanks when several are installed side by side
• All-steel, hot-dip galvanised inside and out
• 300 mm filling funnel with pedal-operated shut-off and self-closing lid; can be operated by anyone
• Built-in hydraulic overfill protection, dipstick and permanently open vent line
• Suction line with lockable safety screw connection and 1 spare socket 1"
• Explosion-pressure-shock-resistant design that withstands even an explosion inside the tank
• Closed base frame for occasional in-house transport when empty by forklift or pallet truck
• Lifting eyes for crane handling according to DGUV Information 209-013

Technical data

• Manufacturer: Rietbergwerke
• Type / capacity: GD-TP-elh 250, 400, 600 and 995 (250 to 995 l)
• Medium: elh liquids (flash point below 55 °C, e.g. waste oil of unknown origin or petrol) and other water-polluting liquids
• Approvals: general building authority approval Z-38.12-288
• Construction: double-walled within the meaning of the AwSV, vacuum leak monitoring of both walls, all-steel
• Dimensions: 800 × 800 × 1200 mm to 1450 × 1250 × 1230 mm (L × W × H), depending on size
• Height including vent line: 4 m (overall height including vent line)
• Weight: 170 to 290 kg depending on size (manufacturer's figure)
• Filling funnel: 300 mm, pedal-operated shut-off, self-closing lid
• Overfill protection: built-in hydraulic overfill protection
• Level check: dipstick
• Connections: permanently open vent line, suction line with lockable safety screw connection, 1 spare socket 1"
• Lifting: lifting eyes according to DGUV Information 209-013; closed base frame for occasional transport when empty

Available versions

Applications

• Collecting waste oil of unknown origin in workshops, fleets and industrial plants
• Collecting and storing petrol and other elh liquids with a flash point below 55 °C
• Installation outdoors or indoors without an additional drip tray

Scope of delivery

• 1 × Rietbergwerke GD-TP-elh hazardous substance depot in the selected size, hot-dip galvanised inside and out, with filling funnel, overfill protection, dipstick, vent line and suction line

Notes

On request Rietbergwerke also supplies a version untreated inside and painted outside, or in stainless steel. The overall height including the vent line is 4 m. Installation, operation and inspections must comply with the applicable regulations (including the German AwSV) and the manufacturer's instructions. Technical data subject to change by the manufacturer.