Skip to main content Skip to search Skip to main navigation
Free shipping* on orders over €20
Call now +4936071924340
Opening hours Mon-Fri 8:00 a.m. - 5:00 p.m
Call now +4936071924340

Rietbergwerke KAP-GIRO Outdoor Fuel Filling Area with Hinged Lid, Diesel and AdBlue®, 4 Trays of 180 l

Rietbergwerke KAP-GIRO Fuel Filling Area for Outdoor Installation – with Hinged Lid, Diesel and AdBlue®, 4 Trays of 180 l, Z-38.5-155

The KAP-GIRO is a fuel filling area for diesel and AdBlue® with a hinged lid for outdoor installation. It serves as a company refuelling point in fleets, haulage companies, municipal depots and agriculture, including heavy vehicles up to 40 t. When a storage tank is filled from a road tanker, it provides the secured area. You can upgrade existing storage tanks with it without construction work.

You need neither construction work nor an oil separator. Four steel trays under heavy-duty gratings catch fuel, and spilled fuel remains visible. The hinged lid covers the area when no refuelling takes place. The galvanised steel does not rust even in permanent outdoor use.

Which version suits you?

  • Basic version for wheeled vehicles: KAP-GIRO 74910 with hinged lid 75093.
  • For easier driving onto the 90 mm high area: additionally drive-on ramps 504653 of galvanised chequer plate for the front long side and both end sides.
  • If tracked vehicles refuel: additionally tracked vehicle kit 73475 with 12 wooden screen-printed boards to protect the gratings and wooden drive-on planks.
  • All versions are drivable up to 6.5 t wheel load and 40 t gross vehicle weight; the storage tank is not included.

Product features

  • Area protected when not refuelling – hinged lid 75093 for outdoor installation covers the area and limits the effective area
  • Easy to open, delivery hose stored protected – 2 covers with gas springs as lifting aid, 1.5 m NW 19 delivery hose with automatic nozzle inside
  • Approved solution – general building authority approval Z-38.5-155 as a secured area for refuelling with diesel and for filling a storage tank from a road tanker
  • For two fluids – diesel and AdBlue®; approved for installation outdoors and indoors
  • Drips caught safely – 4 steel trays with 180 l sump capacity each, each covered by 2 heavy-duty gratings
  • Clean tyres, leaks easy to spot – spilled fuel is easy to see through the gratings, and the tyres are not contaminated
  • Also for lorries – drivable up to 6.5 t wheel load and 40 t gross vehicle weight
  • Quickly ready for use – no construction work and no oil separator required; modular design
  • No rust even in permanent outdoor use – made entirely of hot-dip galvanised steel
  • To suit your fleet – optional drive-on ramps 504653 (chequer plate, end profiles included) or tracked vehicle kit 73475

Technical data

  • Manufacturer: Rietbergwerke
  • Dimensions: KAP-GIRO 74910: 5000 × 2500 × 90 mm (L × W × H)
  • Weight: KAP-GIRO 1100 kg; hinged lid 170 kg; drive-on ramps 162 kg (manufacturer's figures)
  • Sump capacity: 4 trays of 180 l each
  • Gratings: 8 heavy-duty gratings (2 per tray)
  • Load capacity: up to 6.5 t wheel load, 40 t gross vehicle weight
  • Approvals: general building authority approval Z-38.5-155 (DIBt)
  • Medium: diesel and AdBlue®
  • Hinged lids: KAP-GIRO hinged lid 75093: 2 covers of aluminium sheet on a galvanised steel frame, each with 1 gas spring as lifting aid, hose connection outside, 1.5 m NW 19 delivery hose with automatic nozzle inside; 5000 × 2500 × 590 mm closed (2600 mm high when open), 170 kg
  • Drive-on ramps: kit 504653 of galvanised chequer plate for the front long side and both end sides, incl. end profiles; 5550 × 2780 × 90 mm, 162 kg
  • Tracked vehicle accessory kit: kit 73475: 12 wooden screen-printed boards to protect the gratings, wooden drive-on planks on the long side and both end sides
  • Installation: outdoors (with hinged lid); also indoors according to the approval
  • Material: hot-dip galvanised steel

Available versions

Item no.Version
R-74910.75093KAP-GIRO 74910 with Hinged Lid (75093)
R-74910.75093.504653KAP-GIRO 74910 with Hinged Lid and Drive-On Ramps (75093 + 504653)
R-74910.75093.73475KAP-GIRO 74910 with Hinged Lid and Tracked Vehicle Kit (75093 + 73475)

Scope of delivery

  • 1 × KAP-GIRO 74910 fuel filling area (4 drip trays of 180 l each with 8 heavy-duty gratings) and 1 × KAP-GIRO hinged lid 75093, plus drive-on ramps 504653 or tracked vehicle kit 73475 depending on the version

Notes

The storage tank is not included. The KAP-GIRO outdoor complete package (513353) additionally contains the ASS fitting, a double hose system for the delivery line and a feed-through for the filling line; these parts are not part of this item. Installation and operation in accordance with approval Z-38.5-155, the applicable regulations (including the German AwSV) and the manufacturer's instructions. Technical data subject to change by the manufacturer.

Seppeler Rietbergwerke GmbH & Co. KG
Bahnhofstraße 55
33397 Rietberg, Deutschland

https://www.seppeler.de/rietberg-behaelter/

rietbergbehaelter@seppeler.de

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Accessory products

Digital Turbine Meter EZ24, Non-Legal-for-Trade, 1" Male x 1" Female, max. 20 bar
Digital Turbine Meter EZ24, Non-Legal-for-Trade, 1" Male x 1" Female, max. 20 bar
  • Fluids: diesel
  • Accuracy: ±1 %
  • Operating pressure: max. 20 bar
  • Digital turbine meter with rotating display
  • 6-digit total, 5-digit partial

Delivery time: 4-6 Wochen

€289.50*
€243.28 without VAT
Faucet Control System for Filling Station
Faucet Control System for Filling Station
High-quality dispensing valve system for your filling station available at tankundlager.com! Easy control with the automatic Slimline NW 19 dispensing valve included. Excellent prices. Buy now!

Delivery time: 4-6 Wochen

€666.00*
€559.66 without VAT
Rietbergwerke ASS Fitting G2" 73132, Filling Safety Device for KAP-ECO and KAP-GIRO Fuel Filling Areas
Rietbergwerke ASS Fitting G2" 73132, Filling Safety Device for KAP-ECO and KAP-GIRO Fuel Filling Areas
  • Accessory for: KAP-ECO and KAP-GIRO fuel filling areas
  • Connections: G2"
  • Kit: insulated road tanker filling connection with connection plate, limit value sensor for the storage tank, limit value sensor plug
  • Insulated G2" road tanker filling connection with connection plate
  • Limit value sensor for installation in the storage tank

Delivery time: 4-6 Wochen

€1,219.00*
€1,024.37 without VAT
Rietbergwerke Filling Line Feed-Through 74007, Pre-Assembled with Self-Acting Lid for the Hinged Lid of KAP-ECO and KAP-GIRO
Rietbergwerke Filling Line Feed-Through 74007, Pre-Assembled with Self-Acting Lid for the Hinged Lid of KAP-ECO and KAP-GIRO
  • Accessory for: hinged lids of the KAP-ECO and KAP-GIRO fuel filling areas
  • Installation: on site in the hinged lid
  • Pre-assembled component for the filling line
  • Lid opens and closes automatically
  • On-site installation in a hinged lid of the KAP-ECO or KAP-GIRO

Delivery time: 4-6 Wochen

€386.00*
€324.37 without VAT
Rietbergwerke Filling Line Splash Guard 300863, Accessory for KAP Refuelling Areas
Rietbergwerke Filling Line Splash Guard 300863, Accessory for KAP Refuelling Areas
  • Manufacturer designation: splash guard for filling line
  • Suitable for: KAP-ECO and KAP-GIRO refuelling areas
  • Funnel-shaped splash guard at the filler pipe cap
  • Prevents liquid passing over the splash wall if the filling hose tears off
  • Accessory for the KAP-ECO and KAP-GIRO refuelling areas

Delivery time: 4-6 Wochen

€422.00*
€354.62 without VAT
Rietbergwerke Filling Line Extension 73145, Kit for Tank Diameter 1000 mm, 2" Pipe Section and 30° Bend
Rietbergwerke Filling Line Extension 73145, Kit for Tank Diameter 1000 mm, 2" Pipe Section and 30° Bend
  • Tank diameter: 1000 mm
  • Kit: 1 × 2" pipe section, 1 × 30° pipe bend
  • Accessory for: Rietbergwerke fuel tank systems in combination with KAP-ECO or KAP-GIRO
  • Extends the filling line into the filling area, for tank diameter 1000 mm
  • Kit: 1 × 2" pipe section, 1 × 30° pipe bend

Delivery time: 4-6 Wochen

€203.00*
€170.59 without VAT
Rietbergwerke Filling Line Extension 73146, Kit for Tank Diameter 1250/1400 mm, 2" Pipe Section and 30° Bend, G 2" Ball Valve
Rietbergwerke Filling Line Extension 73146, Kit for Tank Diameter 1250/1400 mm, 2" Pipe Section and 30° Bend, G 2" Ball Valve
  • Tank diameter: 1250/1400 mm
  • Kit: 1 × 2" pipe section, 1 × 30° pipe bend, 1 × G 2" ball valve
  • Accessory for: Rietbergwerke fuel tank systems in combination with KAP-ECO or KAP-GIRO
  • Extends the filling line into the filling area, for tank diameter 1250/1400 mm
  • Kit: 1 × 2" pipe section, 1 × 30° pipe bend, G 2" ball valve

Delivery time: 4-6 Wochen

€181.00*
€152.10 without VAT
Steel Ground Pegs, Galvanized
Steel Ground Pegs, Galvanized
10 Ground Anchors, Ø 12 mm, 480 mm long, made of hot-dip galvanized ribbed concrete steel for securing a fuel filling station on compacted gravel (KAP-GIRO only) or a paved surface

Delivery time: 4-6 Wochen

€214.00*
€179.83 without VAT
Dual Hose System for KAP with Hinged Lid
Dual Hose System for KAP with Hinged Lid
The diesel hose between the feed pump on the storage tank and the hose connection on the KAP's hinged cover is enclosed in an additional transparent PU protective hose. In the event of a leak, any escaping diesel is captured by this protective hose and sa

Delivery time: 4-6 Wochen

€1,077.00*
€905.04 without VAT
Height Guide for Dispensing Hose, Mounted on the Folding Lid
Height Guide for Dispensing Hose, Mounted on the Folding Lid
A glide rail mounted vertically on a hinged lid of the KAP allows for the vertical extension of the dispensing hose, enabling access to high-positioned vehicle tanks. The horizontal hose length remains unchanged at 1.5 meters.

Delivery time: 4-6 Wochen

€636.00*
€534.45 without VAT
Height Guide for Dispensing Hose, Mounted on Splash Guard Wall
Height Guide for Dispensing Hose, Mounted on Splash Guard Wall
A glide rail mounted on the splash guard allows for the vertical extension of the dispensing hose, enabling it to reach high-mounted vehicle tanks. The horizontal hose length remains unchanged at 1.5 meters.

Delivery time: 4-6 Wochen

€942.00*
€791.60 without VAT