Skip to main content Skip to search Skip to main navigation
Free shipping* on orders over €20
Call now +4936071924340
Opening hours Mon-Fri 8:00 a.m. - 5:00 p.m
Call now +4936071924340

Rietbergwerke KAP-ECO Fuel Filling Area with Hinged Lid 74920, Outdoor Installation, 2 Drip Trays of 150 l, Z-38.5-155

Rietbergwerke KAP-ECO Fuel Filling Area with Hinged Lid 74920 – Outdoor Installation, 2 Drip Trays of 150 l, Z-38.5-155

This version combines the Rietbergwerke KAP-ECO fuel filling area (72737) with the KAP-ECO hinged lid (74920) for outdoor installation. The KAP-ECO, approved under Z-38.5-155, consists of 2 hot-dip galvanised steel trays with 150 l sump capacity each including drive-over ramps (5200 × 2600 × 60 mm, 680 kg) and is drivable up to 10 t wheel load. The hinged lid covers the trays with 2 covers of aluminium sheet on a galvanised steel frame; one gas spring per cover serves as a lifting aid. There is a hose connection on the outside and a 1.5 m NW 19 delivery hose with automatic nozzle on the inside; closed, the lid measures 5000 × 2500 × 590 mm, open it reaches 2600 mm in height, and it weighs 170 kg.

Product features

  • KAP-ECO 72737 with hinged lid 74920 for outdoor installation
  • Spring-assisted aluminium covers with gas springs as lifting aid
  • 1.5 m NW 19 delivery hose with automatic nozzle inside, hose connection outside
  • General building authority approval Z-38.5-155 as a secured area for refuelling with diesel and for filling a storage tank from a road tanker
  • For diesel and AdBlue®; approved for installation outdoors and indoors
  • 2 drip trays with 150 l sump capacity each, drive-over ramps included
  • Drivable up to 10 t wheel load
  • Virtually no construction work: level, load-bearing ground is sufficient (concrete recommended), no oil separator required
  • Modular design, can be assembled and dismantled
  • Trays and frame of hot-dip galvanised steel

Technical data

  • Manufacturer: Rietbergwerke
  • Components (bill of materials): KAP-ECO 72737 + KAP-ECO hinged lid 74920
  • Dimensions: basic version 72737: 5200 × 2600 × 60 mm (L × W × H)
  • Hinged lids: KAP-ECO hinged lid 74920: 2 covers of aluminium sheet on a galvanised steel frame, each with 1 gas spring as lifting aid, hose connection outside, 1.5 m NW 19 delivery hose with automatic nozzle inside; 5000 × 2500 × 590 mm closed (2600 mm high when open), 170 kg
  • Weight: 680 kg (KAP-ECO) and 170 kg (hinged lid), manufacturer's figures per component
  • Sump capacity: 2 trays of 150 l each
  • Load capacity: up to 10 t wheel load
  • Approvals: general building authority approval Z-38.5-155 (DIBt)
  • Medium: diesel and AdBlue®
  • Installation: on level, load-bearing ground (concrete recommended), can be assembled and dismantled
  • Installation: outdoors (with hinged lid)
  • Material: hot-dip galvanised steel; hinged lid of aluminium sheet on a galvanised steel frame

Applications

  • Company refuelling point for diesel and AdBlue® in fleets, municipal depots, agriculture and business
  • Secured area when filling a storage tank from a road tanker
  • Upgrading existing storage tanks without extensive construction work

Scope of delivery

  • 1 × KAP-ECO 72737 fuel filling area: 2 drip trays (150 l each) including drive-over ramps
  • 1 × KAP-ECO hinged lid 74920 with 2 covers, gas springs, hose connection and 1.5 m NW 19 delivery hose with automatic nozzle

Notes

The storage tank (e.g. KA 3500) is not included. The KAP-ECO indoor (513346) and outdoor (513347) complete packages additionally contain the ASS fitting, a double hose system and splash protection or a feed-through for the filling line; these parts are not part of this item. Installation and operation in accordance with approval Z-38.5-155, the applicable regulations (including the German AwSV) and the manufacturer's instructions. Technical data subject to change by the manufacturer.

Seppeler Rietbergwerke GmbH & Co. KG
Bahnhofstraße 55
33397 Rietberg, Deutschland

https://www.seppeler.de/rietberg-behaelter/

rietbergbehaelter@seppeler.de

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Accessory products

Digital Turbine Meter EZ24, Non-Legal-for-Trade, 1" Male x 1" Female, max. 20 bar
Digital Turbine Meter EZ24, Non-Legal-for-Trade, 1" Male x 1" Female, max. 20 bar
  • Fluids: diesel
  • Accuracy: ±1 %
  • Operating pressure: max. 20 bar
  • Digital turbine meter with rotating display
  • 6-digit total, 5-digit partial

Delivery time: 4-6 Wochen

€289.50*
€243.28 without VAT
Faucet Control System for Filling Station
Faucet Control System for Filling Station
High-quality dispensing valve system for your filling station available at tankundlager.com! Easy control with the automatic Slimline NW 19 dispensing valve included. Excellent prices. Buy now!

Delivery time: 4-6 Wochen

€666.00*
€559.66 without VAT
Rietbergwerke ASS Fitting G2" 73132, Filling Safety Device for KAP-ECO and KAP-GIRO Fuel Filling Areas
Rietbergwerke ASS Fitting G2" 73132, Filling Safety Device for KAP-ECO and KAP-GIRO Fuel Filling Areas
  • Accessory for: KAP-ECO and KAP-GIRO fuel filling areas
  • Connections: G2"
  • Kit: insulated road tanker filling connection with connection plate, limit value sensor for the storage tank, limit value sensor plug
  • Insulated G2" road tanker filling connection with connection plate
  • Limit value sensor for installation in the storage tank

Delivery time: 4-6 Wochen

€1,219.00*
€1,024.37 without VAT
Rietbergwerke Filling Line Feed-Through 74007, Pre-Assembled with Self-Acting Lid for the Hinged Lid of KAP-ECO and KAP-GIRO
Rietbergwerke Filling Line Feed-Through 74007, Pre-Assembled with Self-Acting Lid for the Hinged Lid of KAP-ECO and KAP-GIRO
  • Accessory for: hinged lids of the KAP-ECO and KAP-GIRO fuel filling areas
  • Installation: on site in the hinged lid
  • Pre-assembled component for the filling line
  • Lid opens and closes automatically
  • On-site installation in a hinged lid of the KAP-ECO or KAP-GIRO

Delivery time: 4-6 Wochen

€386.00*
€324.37 without VAT
Rietbergwerke Filling Line Splash Guard 300863, Accessory for KAP Refuelling Areas
Rietbergwerke Filling Line Splash Guard 300863, Accessory for KAP Refuelling Areas
  • Manufacturer designation: splash guard for filling line
  • Suitable for: KAP-ECO and KAP-GIRO refuelling areas
  • Funnel-shaped splash guard at the filler pipe cap
  • Prevents liquid passing over the splash wall if the filling hose tears off
  • Accessory for the KAP-ECO and KAP-GIRO refuelling areas

Delivery time: 4-6 Wochen

€422.00*
€354.62 without VAT
Rietbergwerke Filling Line Extension 73145, Kit for Tank Diameter 1000 mm, 2" Pipe Section and 30° Bend
Rietbergwerke Filling Line Extension 73145, Kit for Tank Diameter 1000 mm, 2" Pipe Section and 30° Bend
  • Tank diameter: 1000 mm
  • Kit: 1 × 2" pipe section, 1 × 30° pipe bend
  • Accessory for: Rietbergwerke fuel tank systems in combination with KAP-ECO or KAP-GIRO
  • Extends the filling line into the filling area, for tank diameter 1000 mm
  • Kit: 1 × 2" pipe section, 1 × 30° pipe bend

Delivery time: 4-6 Wochen

€203.00*
€170.59 without VAT
Rietbergwerke Filling Line Extension 73146, Kit for Tank Diameter 1250/1400 mm, 2" Pipe Section and 30° Bend, G 2" Ball Valve
Rietbergwerke Filling Line Extension 73146, Kit for Tank Diameter 1250/1400 mm, 2" Pipe Section and 30° Bend, G 2" Ball Valve
  • Tank diameter: 1250/1400 mm
  • Kit: 1 × 2" pipe section, 1 × 30° pipe bend, 1 × G 2" ball valve
  • Accessory for: Rietbergwerke fuel tank systems in combination with KAP-ECO or KAP-GIRO
  • Extends the filling line into the filling area, for tank diameter 1250/1400 mm
  • Kit: 1 × 2" pipe section, 1 × 30° pipe bend, G 2" ball valve

Delivery time: 4-6 Wochen

€181.00*
€152.10 without VAT
Steel Ground Pegs, Galvanized
Steel Ground Pegs, Galvanized
10 Ground Anchors, Ø 12 mm, 480 mm long, made of hot-dip galvanized ribbed concrete steel for securing a fuel filling station on compacted gravel (KAP-GIRO only) or a paved surface

Delivery time: 4-6 Wochen

€214.00*
€179.83 without VAT
Dual Hose System for KAP with Hinged Lid
Dual Hose System for KAP with Hinged Lid
The diesel hose between the feed pump on the storage tank and the hose connection on the KAP's hinged cover is enclosed in an additional transparent PU protective hose. In the event of a leak, any escaping diesel is captured by this protective hose and sa

Delivery time: 4-6 Wochen

€1,077.00*
€905.04 without VAT
Height Guide for Dispensing Hose, Mounted on the Folding Lid
Height Guide for Dispensing Hose, Mounted on the Folding Lid
A glide rail mounted vertically on a hinged lid of the KAP allows for the vertical extension of the dispensing hose, enabling access to high-positioned vehicle tanks. The horizontal hose length remains unchanged at 1.5 meters.

Delivery time: 4-6 Wochen

€636.00*
€534.45 without VAT
Height Guide for Dispensing Hose, Mounted on Splash Guard Wall
Height Guide for Dispensing Hose, Mounted on Splash Guard Wall
A glide rail mounted on the splash guard allows for the vertical extension of the dispensing hose, enabling it to reach high-mounted vehicle tanks. The horizontal hose length remains unchanged at 1.5 meters.

Delivery time: 4-6 Wochen

€942.00*
€791.60 without VAT