SCHÜTZ TIT Steel 1,000 l 4019466, Bunded Tank-in-Tank Heating Oil Tank

SCHÜTZ TIT Steel 1,000 l 4019466 – Bunded Tank-in-Tank Heating Oil Tank

The SCHÜTZ TIT Steel 1,000 l (part no. 4019466) is a tank-in-tank heating oil tank with integrated collecting tray. According to SCHÜTZ, the combination of HDPE and steel is opaque and ensures a long service life and stability; the galvanised steel tube pallet provides a ventilated clearance from the floor. The NIV-O-STOP overfill protection system with overfill sensor chain is fitted as standard.

Product features

• Tank-in-tank: inner container with integrated collecting tray – no additional bund required
• General building approval Z-40.21-133
• NIV-O-STOP overfill protection with overfill sensor chain as standard
• SMP odour barrier against permeation of heating oil, PROOFED BARRIER® quality label
• HDPE inner container and steel, opaque and UV-resistant; 15-year guarantee according to SCHÜTZ
• Single tank or battery: single row up to 5 tanks (T 101–T 105), two rows up to 10 tanks (T 201–T 205), special layouts L1/L3
• Suitable for earthquake zones 1, 2 and 3 to DIN 4149 (conditions per catalogue)

Technical data

• Manufacturer: SCHÜTZ GmbH & Co. KGaA
• Manufacturer part number: 4019466
• EAN: 4039032024421
• Catalogue designation: tank-in-tank steel (TIT-ST) 1,000 l
• Nominal capacity: 1,000 l
• Dimensions (L × W × H): 1,135 x 727 x 1,600 mm (height with lines 1,750 mm)
• Tilt dimension: 1,962 mm
• Footprint: single tank 727 x 1,135 mm; 5 tanks in one row (T 105) 3,767 x 1,135 mm
• Approval: Z-40.21-133
• Stored media: heating oil EL (DIN 51603-1), heating oil EL A Bio 5 to Bio 30 (DIN SPEC 51603-6), heating oil EL-P (DIN/TS 51603-8), diesel fuel (DIN EN 590), biodiesel/FAME (DIN EN 14214), paraffinic diesel fuel (DIN EN 15940), lubricating, hydraulic and heat transfer oils (flash point above 55 °C, new and used), vegetable oils
• Installation: Single tank or battery: single row up to 5 tanks (T 101–T 105), two rows up to 10 tanks (T 201–T 205), special layouts L1/L3
• Earthquake zones (DIN 4149): zones 1, 2 and 3
• Accessory packages (available separately): basic package A 4036658 (export version with threaded connection: 4036659), extension package B 4036663, row connection package CDL 4036669
• Optional accessories (not included): anti-slip mat 3103353 (760 x 1,490 mm) for installation in earthquake zones; pump package 4020392 (hand pump)
• Weight: approx. 85 kg

Applications

• Heating oil storage for heating systems in new builds and modernisation
• Storage of diesel fuel and biodiesel
• Storage of lubricating, hydraulic and heat transfer oils (single installation)

Scope of delivery

• 1 × SCHÜTZ TIT Steel 1,000 l (4019466) with integrated collecting tray

Notes

The connection fittings are not included; they are contained in the accessory packages: 1 × basic package A per system, 1 × extension package B for each further tank in a row, plus 1 × CDL row connection package for two-row installation or L1/L3. According to the catalogue, battery installation is only permitted for heating oil EL, diesel fuel, biodiesel and heating oil EL A Bio 5 to Bio 15. AdBlue®, ethylene glycol, photographic chemicals and ammonia solution are not approved for TIT steel. Wall clearances per catalogue: one end face 400 mm, all other sides 50 mm; ceiling clearance 500 mm for two-row installation, for single-row installation at least 300 mm above the tank top is recommended. The permissible filling level must not exceed 95 %; the prescribed overfill sensor setting must be observed. Earthquake zones: install with full contact on a level, flat concrete surface with anti-slip mat (friction coefficient ≥ 0.45), no rigid line connections. Technical data subject to change by the manufacturer.