SCHÜTZ TIT Plastic 1,000 l Special 4019603, Bunded Tank-in-Tank Heating Oil Tank

SCHÜTZ TIT Plastic 1,000 l Special 4019603 – Bunded Tank-in-Tank Heating Oil Tank

The SCHÜTZ TIT Plastic 1,000 l Special (part no. 4019603) is a heating oil tank built on the tank-in-tank principle: according to SCHÜTZ, the combination of inner container and integrated collecting tray provides double protection and makes additional structural measures unnecessary. According to SCHÜTZ, the Special version has a small footprint and is ideal for new builds and modernisation. The NIV-O-STOP overfill protection system with overfill sensor chain is fitted as standard, and the SMP odour barrier inhibits the permeation of heating oil.

Product features

• Tank-in-tank: inner container with integrated collecting tray – no additional bund required
• General building approval Z-40.21-371
• NIV-O-STOP overfill protection with overfill sensor chain as standard
• SMP odour barrier against permeation of heating oil, PROOFED BARRIER® quality label
• 15-year guarantee according to SCHÜTZ, UV-stabilised
• Single tank or battery: single row up to 5 tanks (T 101–T 105), two rows up to 10 tanks (T 201–T 205), special layouts L1/L3
• Suitable for earthquake zones 1 and 2 to DIN 4149 (conditions per catalogue)

Technical data

• Manufacturer: SCHÜTZ GmbH & Co. KGaA
• Manufacturer part number: 4019603
• EAN: 4039032024452
• Catalogue designation: tank-in-tank plastic (TIT-K) 1,000 l Special
• Nominal capacity: 1,000 l
• Dimensions (L × W × H): 820 x 840 x 1,998 mm (height with lines 2,115 mm)
• Tilt dimension: 2,129 mm
• Footprint: single tank 820 x 840 mm; 5 tanks in one row (T 105) 4,500 x 840 mm
• Approval: Z-40.21-371
• Stored media: heating oil EL (DIN 51603-1), heating oil EL A Bio 5 to Bio 30 (DIN SPEC 51603-6), heating oil EL-P (DIN/TS 51603-8), diesel fuel (DIN EN 590), biodiesel/FAME (DIN EN 14214), paraffinic diesel fuel (DIN EN 15940), lubricating, hydraulic and heat transfer oils (flash point above 55 °C, new and used), vegetable oils; additionally ethylene glycol (radiator antifreeze), photographic chemicals (≤ 1.15 g/cm³), ammonia solution and urea solution 32.5 % (AdBlue®, ≤ 1.15 g/cm³)
• Installation: Single tank or battery: single row up to 5 tanks (T 101–T 105), two rows up to 10 tanks (T 201–T 205), special layouts L1/L3
• Earthquake zones (DIN 4149): zones 1 and 2
• Accessory packages (available separately): basic package A 4036658 (export version with threaded connection: 4036659), extension package B 4036660, row connection package CDL 4036665
• Weight: approx. 58 kg

Applications

• Heating oil storage for heating systems in new builds and modernisation
• Storage of diesel fuel and biodiesel
• Storage of lubricating, hydraulic and heat transfer oils (single installation)

Scope of delivery

• 1 × SCHÜTZ TIT Plastic 1,000 l Special (4019603) with integrated collecting tray

Notes

The connection fittings are not included; they are contained in the accessory packages: 1 × basic package A per system, 1 × extension package B for each further tank in a row, plus 1 × CDL row connection package for two-row installation or L1/L3. According to the catalogue, battery installation is only permitted for heating oil EL, diesel fuel, biodiesel and heating oil EL A Bio 5 to Bio 15. Photographic chemicals only for single installation; according to the catalogue, the galvanised strap must then be coated with epoxy resin on site. Wall clearances per catalogue: one end face 400 mm, all other sides 50 mm; ceiling clearance 500 mm for two-row installation, for single-row installation at least 300 mm above the tank top is recommended. The permissible filling level must not exceed 95 %; the prescribed overfill sensor setting must be observed. Earthquake zones: install with full contact on a level, flat concrete surface with anti-slip mat (friction coefficient ≥ 0.45), no rigid line connections. Technical data subject to change by the manufacturer.