SCHÜTZ TIT Plastic 1,000 l Compact 4005245, Bunded Tank-in-Tank Heating Oil Tank

SCHÜTZ TIT Plastic 1,000 l Compact 4005245 – Bunded Tank-in-Tank Heating Oil Tank

The SCHÜTZ TIT Plastic 1,000 l Compact (part no. 4005245) is a heating oil tank built on the tank-in-tank principle: according to SCHÜTZ, the combination of inner container and integrated collecting tray provides double protection and makes additional structural measures unnecessary. According to SCHÜTZ, the Compact version is designed for very small rooms and narrow passageways. The NIV-O-STOP overfill protection system with overfill sensor chain is fitted as standard, and the SMP odour barrier inhibits the permeation of heating oil.

Product features

• Tank-in-tank: inner container with integrated collecting tray – no additional bund required
• General building approval Z-40.21-304
• NIV-O-STOP overfill protection with overfill sensor chain as standard
• SMP odour barrier against permeation of heating oil, PROOFED BARRIER® quality label
• 15-year guarantee according to SCHÜTZ, UV-stabilised
• Single tank or battery: single row up to 5 tanks (T 101–T 105), two rows up to 10 tanks (T 201–T 205), special layouts L1/L3
• Suitable for earthquake zones 1 and 2 to DIN 4149 (conditions per catalogue)

Technical data

• Manufacturer: SCHÜTZ GmbH & Co. KGaA
• Manufacturer part number: 4005245
• EAN: 4039032024209
• Catalogue designation: tank-in-tank plastic (TIT-K) 1,000 l Compact
• Nominal capacity: 1,000 l
• Dimensions (L × W × H): 1,420 x 660 x 1,675 mm (height with lines 1,825 mm)
• Tilt dimension: 2,195 mm
• Footprint: single tank 660 x 1,420 mm; 5 tanks in one row (T 105) 3,700 x 1,420 mm
• Approval: Z-40.21-304
• Stored media: heating oil EL (DIN 51603-1), heating oil EL A Bio 5 to Bio 30 (DIN SPEC 51603-6), heating oil EL-P (DIN/TS 51603-8), diesel fuel (DIN EN 590), biodiesel/FAME (DIN EN 14214), paraffinic diesel fuel (DIN EN 15940), lubricating, hydraulic and heat transfer oils (flash point above 55 °C, new and used), vegetable oils; additionally ethylene glycol (radiator antifreeze), photographic chemicals (≤ 1.15 g/cm³), ammonia solution and urea solution 32.5 % (AdBlue®, ≤ 1.15 g/cm³)
• Installation: Single tank or battery: single row up to 5 tanks (T 101–T 105), two rows up to 10 tanks (T 201–T 205), special layouts L1/L3
• Earthquake zones (DIN 4149): zones 1 and 2
• Accessory packages (available separately): basic package A 4036658 (export version with threaded connection: 4036659), extension package B 4036661, row connection package CDL 4036664
• Optional accessories (not included): anti-slip mat 3103353 (760 x 1,490 mm) for installation in earthquake zones; pump package 4020392 (hand pump)
• Weight: approx. 67 kg

Applications

• Heating oil storage for heating systems in new builds and modernisation
• Storage of diesel fuel and biodiesel
• Storage of lubricating, hydraulic and heat transfer oils (single installation)

Scope of delivery

• 1 × SCHÜTZ TIT Plastic 1,000 l Compact (4005245) with integrated collecting tray

Notes

The connection fittings are not included; they are contained in the accessory packages: 1 × basic package A per system, 1 × extension package B for each further tank in a row, plus 1 × CDL row connection package for two-row installation or L1/L3. According to the catalogue, battery installation is only permitted for heating oil EL, diesel fuel, biodiesel and heating oil EL A Bio 5 to Bio 15. Photographic chemicals only for single installation; according to the catalogue, the galvanised strap must then be coated with epoxy resin on site. Wall clearances per catalogue: one end face 400 mm, all other sides 50 mm; ceiling clearance 500 mm for two-row installation, for single-row installation at least 300 mm above the tank top is recommended. The permissible filling level must not exceed 95 %; the prescribed overfill sensor setting must be observed. Earthquake zones: install with full contact on a level, flat concrete surface with anti-slip mat (friction coefficient ≥ 0.45), no rigid line connections. Technical data subject to change by the manufacturer.