PCL QUBE 2 Tyre Inflator, Stationary, Verified 230 V Tyre Inflator with Ceramic Sensor, up to 10 bar, 3 Operating Modes
€469.00*
- Inflation pressure: up to 10 bar (min. 0.3 bar)
- Inlet pressure: up to 15 bar
- Accuracy: ± 0.5 % of reading
- Stationary, verified 230 V tyre inflator
- Ceramic sensor, ± 0.5 % of reading, 0.1 bar resolution
Delivery time: 1-3 days
PCL QUBE 2 Tyre Inflator – Stationary, Verified 230 V Tyre Inflator with Ceramic Sensor, up to 10 bar, 3 Operating Modes
The PCL QUBE 2 electronic tyre inflator is a stationary tyre inflator for workshops that automatically inflates or deflates the tyre to the set target pressure. The manufacturer is PCL (Pneumatic Components Ltd); it is distributed by TECALEMIT. According to the manufacturer, the unit uses a ceramic sensor, inflates up to 10 bar at an inlet pressure of up to 15 bar, measures with ± 0.5 % of reading at 0.1 bar resolution and is operated by touch control; conformity has been assessed under the German Measurement and Verification Act. Three operating modes are available: inflating and deflating to the target value, tyre service mode with set pressure and multi-stage nitrogen purging.
Product features
- Stationary, verified 230 V tyre inflator
- Ceramic sensor, ± 0.5 % of reading, 0.1 bar resolution
- Inflation pressure up to 10 bar, inlet pressure up to 15 bar
- 3 operating modes including nitrogen purging, touch control
- Compact: 150 × 150 × 92 mm, IP41
Technical data
- Manufacturer: PCL (Pneumatic Components Ltd), distributed by TECALEMIT
- Manufacturer part number: QUBE2/0GD
- Inflation pressure: up to 10 bar (min. 0.3 bar)
- Inlet pressure: up to 15 bar
- Accuracy: ± 0.5 % of reading
- Display resolution: 0,1 bar
- Sensor: ceramic sensor
- Operating modes: inflate/deflate to target value, tyre service mode with set pressure, nitrogen purging
- Legal-for-trade: conformity assessment under the German Measurement and Verification Act (verified)
- Voltage: 230 V, power cable with Schuko plug
- Protection rating: IP41
- Dimensions: 150 × 150 × 92 mm
- Temperature range: −20 to +70 °C
- Delivery hose: 5 m inflation hose
Applications
- Tyre inflation in car, truck and tyre workshops
- Stationary compressed-air tyre inflation station on the workshop wall
- Nitrogen inflation of tyres
Scope of delivery
- 1 × QUBE 2 tyre inflator (verified) with power cable and Schuko plug
- 1 × 5 m inflation hose
Notes
A compressed-air supply on site (max. 15 bar inlet pressure) is required for operation; a compressor is not included. The manufacturer's data on weight and temperature range are not consistent; replacement hoses are available in 5 m (DS150) and 10 m (DS175). Technical data subject to change by the manufacturer.
Tecalemit GmbH & CO. KG
Munketoft 42
24937 Flensbur, Deutschland
Login
1 review
19 January 2024 15:04
Der QUBE 2 ist super einfach zu bedienen und extrem präzise – ein Muss in jeder Werkstatt.
Accessory products
- Version: core retracting tool, Euro Clip-on
- Hose connection: 6.35 mm (1/4")
- Operating pressure: max. 7 bar
- Safely remove and refit the valve core during inflation
- Shorter inflation time, no ejection of the valve core
Delivery time: 1-3 days