JESSBERGER Hand Pump JP-07 Red with EPDM Seals for Alkaline Media, with 1.5 m Transfer Hose and Tap

JESSBERGER Hand Pump JP-07 Red with EPDM Seals for Alkaline Media – with Outlet Tap or with 1.5 m Transfer Hose and Tap

The JESSBERGER hand pump JP-07 red with EPDM seals is a manual dispensing and transfer pump made of polypropylene for alkaline media from 20 l canisters up to 200 l drums. It is available with outlet tap or additionally with a transfer hose (1.5 m) and tap. It is fitted without a thread: three supplied rubber adapters for bung holes from 46.5 to 60 mm are expanded in the bung hole via the knurled handwheel. The suction tube consists of four 250 mm sections; the flow rate is up to 20 l/min of water.

Product features

• With outlet tap, optionally with 1.5 m transfer hose and tap
• Thread-free mounting with 3 rubber adapters for bung holes Ø 46.5–60 mm
• EPDM seals
• Suction tube 4 × 250 mm for canisters up to 200 l drums
• For alkaline media, max. 40 °C, max. 400 mPas

Technical data

• Manufacturer: JESSBERGER GmbH
• Flow rate: water max. 20 l/min
• Seals: EPDM
• Suction pipe: 4 sections of 250 mm each, Ø max. 31 mm
• Mounting: no thread: 3 rubber adapters for bung holes Ø 46.5–60 mm, expanded via the knurled handwheel
• Material: polypropylene (PP) pump body
• Containers: 20 l canisters to 200 l drums
• Operating limits: max. 40 °C, max. 400 mPas
• Fluids: alkaline media such as caustic soda solution, caustic potash solution, lime water, lime liquor, chlorine cleaners, washing-up liquids and detergents; not for oils

Available versions

Applications

• Dispensing small quantities from canisters and drums in workshops, cleaning and industry
• Transferring without a power supply

Scope of delivery

• 1 × hand pump JP-07 red with outlet tap
• 1 × suction tube, 4 sections (4 × 250 mm)
• 3 × rubber adapters for bung holes Ø 46.5–60 mm
• depending on version: 1 × transfer hose 1.5 m with tap

Notes

Max. 40 °C and 400 mPas (maximum values). The container must be sealed airtight. Not for hazard classes A I/A II, flammable media or potentially explosive atmospheres. Technical data subject to change by the manufacturer.