JESSBERGER Hand Pump JP-07 Blue with NBR Seals for Diesel, Heating Oil and Mineral Oil, with Outlet Tap

JESSBERGER Hand Pump JP-07 Blue with NBR Seals for Diesel, Heating Oil and Mineral Oil – with Outlet Tap or with 1.5 m Transfer Hose and Tap

The JESSBERGER hand pump JP-07 blue with NBR seals is a manual dispensing and transfer pump made of polypropylene for diesel, heating oil and mineral oils from 20 l canisters up to 200 l drums. It is available with outlet tap or additionally with a transfer hose (1.5 m) and tap. It is fitted without a thread: three supplied rubber adapters for bung holes from 46.5 to 60 mm are expanded in the bung hole via the knurled handwheel. The suction tube consists of four 250 mm sections; the flow rate is up to 20 l/min of water; SAE 30 oil max. 9 l/min at 20 °C.

Product features

• With outlet tap, optionally with 1.5 m transfer hose and tap
• Thread-free mounting with 3 rubber adapters for bung holes Ø 46.5–60 mm
• NBR seals
• Suction tube 4 × 250 mm for canisters up to 200 l drums
• For diesel, heating oil and mineral oils, max. 40 °C, max. 400 mPas

Technical data

• Manufacturer: JESSBERGER GmbH
• Flow rate: water max. 20 l/min; SAE 30 oil max. 9 l/min at 20 °C
• Seals: NBR
• Suction pipe: 4 sections of 250 mm each, Ø max. 31 mm
• Mounting: no thread: 3 rubber adapters for bung holes Ø 46.5–60 mm, expanded via the knurled handwheel
• Material: polypropylene (PP) pump body
• Containers: 20 l canisters to 200 l drums
• Operating limits: max. 40 °C, max. 400 mPas
• Fluids: diesel, heating oil, hydraulic oil HLP 46/68/100, light machine oil, transformer oil, engine oil SAE 10/15, lubricating oil, light turbine oil, oils up to 400 mPas (SAE 30); not for oxidising media such as nitric acid or hydrogen peroxide

Available versions

Applications

• Dispensing diesel, heating oil and mineral oils from canisters and drums
• Workshops, agriculture and sites without a power supply

Scope of delivery

• 1 × hand pump JP-07 blue with outlet tap
• 1 × suction tube, 4 sections (4 × 250 mm)
• 3 × rubber adapters for bung holes Ø 46.5–60 mm
• depending on version: 1 × transfer hose 1.5 m with tap

Notes

Max. 40 °C and 400 mPas (maximum values). The container must be sealed airtight. Not for hazard classes A I/A II, flammable media or potentially explosive atmospheres. Technical data subject to change by the manufacturer.