JESSBERGER Drum Pump Set JP-380 PVDF Ø 41 for Highly Aggressive Liquids, 230 V, 1,000 mm Immersion Tube

JESSBERGER Drum Pump Set JP-380 PVDF Ø 41 for Highly Aggressive Liquids – 230 V, 1,000 or 1,200 mm Immersion Tube

The JESSBERGER drum pump set JP-380 PVDF Ø 41 with JP-380 universal motor (825 W) transfers concentrated acids and highly aggressive chemicals at up to 112 l/min with a delivery head of 16 m. The set is available for 230 V and with a 1,000 or 1,200 mm immersion tube. The PVDF pump tube with Hastelloy (HC) shaft has an outer diameter of 41 mm, a G 1¼" connection thread and a 1" hose connection. The set also includes a 2 m multi-purpose chemical hose 1", two stainless steel hose clamps and a PVDF nozzle. Suitable for fluids up to 1,000 mPas and a density up to 1.9 at max. 90 °C; not for flammable media or potentially explosive atmospheres.

Product features

• JP-380 universal motor with 825 W for 230 V, IP 55, externally ventilated, with overload protection
• PVDF pump tube with Hastelloy shaft, Ø 41 mm, up to 90 °C
• 1,000 mm immersion tube for 200 l drums or 1,200 mm for IBCs
• Complete set with 2 m multi-purpose chemical hose, stainless steel hose clamps and PVDF nozzle
• For concentrated acids and highly aggressive chemicals up to 1,000 mPas, density up to 1.9

Technical data

• Manufacturer: JESSBERGER GmbH
• Flow rate: up to 112 l/min
• Delivery head: up to 16 m
• Immersion tube length: 1,000 mm for 200 l drums, 1,200 mm for IBCs
• Drive: JP-380 universal motor, 825 W, 230 V, 50 Hz, IP 55, externally ventilated, on/off switch, no-volt release, overload protection
• Pump tube: PVDF, outer Ø 41 mm, Hastelloy (HC) shaft
• Connections: connection thread G 1¼", hose connection 1" (DN 25)
• Viscosity: max. 1,000 mPas
• Density (specific gravity): max. 1.9
• Fluid temperature: max. 90 °C
• Fluids: highly aggressive liquids, e.g. nitric, sulphuric (diluted), hydrofluoric, chromic, chloric and hydrobromic acid, phosphoric, lactic, oxalic, maleic and tannic acid, sodium hypochlorite, urea, potassium permanganate, potassium iodide

Available versions

Applications

• Transferring concentrated acids and highly aggressive chemicals from 200 l drums and IBCs
• Chemical industry, electroplating, laboratories and water treatment

Scope of delivery

• 1 × JP-380 universal motor, 825 W, 230 V
• 1 × PVDF (HC) pump tube Ø 41 mm, 1,000 or 1,200 mm immersion tube depending on version
• 2 m multi-purpose chemical hose 1" (DN 25), conductive, -25 to +90 °C
• 2 × stainless steel hose clamp
• 1 × PVDF nozzle 1" (DN 25)

Notes

Performance data are maximum values measured with water at 20 °C (rotor version). Not suitable for flammable media or potentially explosive atmospheres. Check the resistance of the materials to the fluid before use. PVDF is not resistant to hot solvents; resistance to strongly alkaline solutions and ketones is limited. Technical data subject to change by the manufacturer.