JESSBERGER Drum Pump Set JP-280 ALU Ø 41 for Diesel, Heating Oil and Mineral Oils, 230 V, 1,000 mm Immersion Tube

JESSBERGER Drum Pump Set JP-280 ALU Ø 41 for Diesel, Heating Oil and Mineral Oils – 230 V or 115 V, 1,000 mm Immersion Tube

The JESSBERGER drum pump set JP-280 ALU Ø 41 with JP-280 universal motor (825 W) transfers diesel, heating oil and mineral oils at up to 112 l/min with a delivery head of 16 m. The set is available for 230 V or 115 V and with a 1,000 mm immersion tube. The aluminium pump tube with stainless steel 1.4571 shaft has an outer diameter of 41 mm, a G 1¼" connection thread and a 1" hose connection. The set also includes a 2 m mineral oil hose 1", two stainless steel hose clamps and an aluminium nozzle. Suitable for fluids up to 1,000 mPas and a density up to 1.9 at max. 50 °C; not for highly flammable media or potentially explosive atmospheres.

Product features

• JP-280 universal motor with 825 W for 230 V or 115 V, double insulated (protection class II)
• Aluminium pump tube with stainless steel 1.4571 shaft, Ø 41 mm
• 1,000 mm immersion tube for 200 l drums
• Complete set with 2 m mineral oil hose, stainless steel hose clamps and aluminium nozzle
• For diesel, heating oil, engine, gear and hydraulic oils up to 1,000 mPas

Technical data

• Manufacturer: JESSBERGER GmbH
• Flow rate: up to 112 l/min
• Delivery head: up to 16 m
• Immersion tube length: 1,000 mm (for 200 l drums)
• Drive: JP-280 universal motor, 825 W, 230 V or 115 V, 50/60 Hz, IP 24, double insulated, protection class II, internally ventilated, overcurrent circuit breaker with undervoltage release, 5 m cable with Schuko plug
• Pump tube: aluminium, outer Ø 41 mm, stainless steel 1.4571 shaft
• Connections: connection thread G 1¼", hose connection 1" (DN 25)
• Viscosity: max. 1,000 mPas
• Density (specific gravity): max. 1.9
• Fluid temperature: max. 50 °C
• Fluids: diesel, heating oil, engine oils (e.g. SAE 10/15W-40/50), lubricating oil, gear oil SAE 90, hydraulic oil HLP 46/68/100, machine, tractor, transformer, turbine and two-stroke oil

Available versions

Applications

• Transferring diesel, heating oil and lubricants from 200 l drums
• Workshops, fleets, agriculture and industry

Scope of delivery

• 1 × JP-280 universal motor, 825 W, 230 V or 115 V depending on version
• 1 × aluminium pump tube Ø 41 mm with stainless steel shaft, 1,000 mm immersion tube
• 2 m mineral oil hose 1" (DN 25)
• 2 × stainless steel hose clamp
• 1 × aluminium nozzle 1" (DN 25)

Notes

Performance data are maximum values measured with water at 20 °C (rotor version). At 1,000 mPas (approximately SAE 90 gear oil at 15 °C) the flow rate approaches zero. Not for highly flammable media or potentially explosive atmospheres. Technical data subject to change by the manufacturer.