JESSBERGER Drum Pump Set JP-140 PP (HC) Ø 41 for Acids, Alkalis and Low-Flammability Liquids, 230 V, 1,000 mm Immersion Tube

JESSBERGER Drum Pump Set JP-140 PP (HC) Ø 41 for Acids, Alkalis and Low-Flammability Liquids – 230 V, 1,000 mm Immersion Tube

The JESSBERGER drum pump set JP-140 PP (HC) Ø 41 with JP-140 universal motor (450 W) for 230 V and 1,000 mm immersion tube (for 200 l drums) transfers acids, alkalis and low-flammability liquids at up to 87 l/min with a delivery head of 10 m. The polypropylene pump tube with Hastelloy (HC) shaft has an outer diameter of 41 mm, a G 1¼" connection thread and a 1" hose connection. The set also includes a 2 m PVC hose 1", two stainless steel hose clamps and a PP nozzle. Suitable for fluids up to 400 mPas and a density up to 1.3 at max. 50 °C; not for flammable media or potentially explosive atmospheres.

Product features

• JP-140 universal motor with 450 W for 230 V, double insulated (protection class II), with thermal protection
• Polypropylene pump tube with Hastelloy shaft, Ø 41 mm
• 1,000 mm immersion tube for 200 l drums
• Complete set with 2 m PVC hose, stainless steel hose clamps and PP nozzle
• For acids and alkalis up to 400 mPas, density up to 1.3, max. 50 °C

Technical data

• Manufacturer: JESSBERGER GmbH
• Flow rate: up to 87 l/min
• Delivery head: up to 10 m
• Immersion tube length: 1,000 mm (for 200 l drums)
• Drive: JP-140 universal motor, 450 W, 230 V, 50 Hz, IP 24, double insulated, protection class II, internally ventilated, overcurrent circuit breaker with no-volt release, thermal protection, 5 m cable with Schuko plug
• Pump tube: polypropylene (PP), outer Ø 41 mm, Hastelloy (HC) shaft
• Connections: connection thread G 1¼", hose connection 1" (DN 25)
• Viscosity: max. 400 mPas
• Density (specific gravity): max. 1.3
• Fluid temperature: max. 50 °C
• Fluids: acids and alkalis up to density 1.3, e.g. acetic acid up to 80 %, caustic soda solution, fertiliser solutions, photographic developer, distilled water
• Weight: approx. 3.1 kg

Applications

• Transferring acids, alkalis and chemicals from 200 l drums and IBCs
• Chemical industry, water treatment, cleaning technology and industrial plants

Scope of delivery

• 1 × JP-140 universal motor, 450 W, 230 V
• 1 × PP (HC) pump tube Ø 41 mm, 1,000 mm immersion tube
• 2 m PVC hose 1" (DN 25)
• 2 × stainless steel hose clamp
• 1 × PP nozzle 1" (DN 25)

Notes

Performance data are maximum values measured with water at 20 °C (rotor version). Not suitable for flammable media or potentially explosive atmospheres. Check the resistance of the materials to the fluid before use. Technical data subject to change by the manufacturer.