JESSBERGER Air Motor JP-AIR 2 for Drum Pumps, 600 W at 6 bar, Ex Marking, Silencer
€788.00*
- Power: 600 W at max. 6 bar
- Flow rate: max. 80 l/min (rotor) / 66 l/min (impeller), with Ø 41 mm pump tube
- Delivery head: max. 10 m (rotor) / 15 m (impeller)
- Compressed air drive 600 W at max. 6 bar
- Ex marking II 2G / II 2D
Delivery time: 2-5 days
JESSBERGER Air Motor JP-AIR 2 for Drum Pumps – 600 W at 6 bar, Ex Marking, Silencer
The JESSBERGER air motor JP-AIR 2 drives drum pump tubes with 600 W at a maximum operating pressure of 6 bar. It has a silencer and an on/off push button on the handle that can be locked with a twist. Speed and therefore flow rate are controlled by a ball valve in the compressed air supply line, to be provided on site; air consumption is 15 l/s under load. The motor carries the Ex marking II 2G Ex h IIC T6 Gb X / II 2D Ex h IIIC T80°C Db X and may only be used in potentially explosive atmospheres together with an ATEX-certified stainless steel pump tube.
Product features
- Compressed air drive 600 W at max. 6 bar
- Ex marking II 2G / II 2D
- On/off push button on the handle, lockable with a twist
- With silencer
Technical data
- Manufacturer: JESSBERGER GmbH
- Manufacturer part number: 3002 0600
- EAN: 4262414661161
- Power: 600 W at max. 6 bar
- Flow rate: max. 80 l/min (rotor) / 66 l/min (impeller), with Ø 41 mm pump tube
- Delivery head: max. 10 m (rotor) / 15 m (impeller)
- Air consumption: 15 l/s under load
- Viscosity: max. 600 mPas
- Density (specific gravity): max. 1.5
- Explosion protection: II 2G Ex h IIC T6 Gb X / II 2D Ex h IIIC T80°C Db X (only with ATEX-certified stainless steel pump tube)
- Design: silencer, lockable on/off push button on the handle
Applications
- Driving stainless steel drum pump tubes for flammable liquids such as petrol, alcohols and solvents
- Chemical, paint and coatings industry and sites with potentially explosive atmospheres
Scope of delivery
- 1 × JP-AIR 2 air motor with silencer
Notes
Performance data are maximum values with a Ø 41 mm pump tube, measured with water at 20 °C. Use in potentially explosive atmospheres is only permitted together with an ATEX-certified stainless steel pump tube; observe the operating instructions and the marking of motor and pump tube and provide equipotential bonding. The ball valve for controlling the compressed air is not included. Technical data subject to change by the manufacturer.
Dr. Jeßberger GmbH
Jägerweg 5-7
85521 Ottobrunn, Deutschland
Login