JESSBERGER Air Motor JP-AIR 1 for Laboratory Pumps, 300 W at max. 6 bar, with Ball Valve

JESSBERGER Air Motor JP-AIR 1 for Laboratory Pumps – 300 W at max. 6 bar, with Ball Valve

The JESSBERGER air motor JP-AIR 1 delivers 300 W at max. 6 bar and drives JESSBERGER laboratory and drum pump tubes. A brass ball valve meters the compressed air and thus controls speed and flow rate; a silencer is fitted. With laboratory pump tubes of Ø 25, 28 or 32 mm it achieves up to 18, 33 or 42 l/min and 5, 6 or 8 m delivery head, with a Ø 41 mm drum pump tube up to 78 l/min and 9 m. Pump tube and compressed air service unit are not included.

Product features

• Compressed air drive 300 W at max. 6 bar, no mains connection
• Brass ball valve to control speed and flow rate
• With silencer
• For JESSBERGER laboratory pump tubes Ø 25/28/32 mm and drum pump tubes Ø 41 mm

Technical data

• Manufacturer: JESSBERGER GmbH
• Manufacturer part number: 3001 0300
• Drive: JP-AIR 1 air motor, 300 W at max. 6 bar
• Flow rate: with laboratory pump tube Ø 25/28/32 mm up to 18/33/42 l/min; with drum pump tube Ø 41 mm up to 78 l/min
• Delivery head: 5/6/8 m (laboratory pump tubes), 9 m (drum pump tube Ø 41 mm)
• Accessory: silencer, brass ball valve
• Viscosity: max. 400 mPas
• Density (specific gravity): max. 1.3

Applications

• Driving laboratory and drum pump tubes where compressed air is available
• Laboratories, chemicals and sites without a suitable power supply

Scope of delivery

• 1 × air motor JP-AIR 1 with ball valve and silencer

Notes

Performance data are maximum values with water at 20 °C. Pump tube and compressed air service unit (3/8") are available separately. Before use in potentially explosive atmospheres, check suitability with the manufacturer. Technical data subject to change by the manufacturer.