JESSBERGER ATEX Drum Pump Set JP-AIR 1 SS Ø 41 in Stainless Steel for Flammable Liquids, Compressed Air, 1,000 mm Immersion Tube

JESSBERGER ATEX Drum Pump Set JP-AIR 1 SS Ø 41 in Stainless Steel for Flammable Liquids – Compressed Air, 1,000 or 1,200 mm Immersion Tube

The JESSBERGER ATEX drum pump set JP-AIR 1 SS Ø 41 with JP-AIR 1 air motor (300 W at max. 6 bar) transfers alcohols, petrol and solvents at up to 78 l/min with a delivery head of 9 m. The set is available with a 1,000 or 1,200 mm immersion tube. The ATEX-certified stainless steel 1.4571 pump tube has an outer diameter of 41 mm, a G 1¼" connection thread and a 1" hose connection. The set also includes a 2 m electrically conductive multi-purpose hose 1", two stainless steel hose tails, a nickel-plated brass nozzle and an equipotential bonding cable set. Suitable for fluids up to 400 mPas and a density up to 1.3; approved for flammable media and use in potentially explosive atmospheres.

Product features

• Explosion-proof JP-AIR 1 air motor with 300 W at max. 6 bar
• ATEX pump tube in stainless steel 1.4571, Ø 41 mm (ZELM 09 ATEX 0424 X)
• 1,000 mm immersion tube for 200 l drums or 1,200 mm for IBCs
• Complete set with conductive hose, stainless steel hose tails, nickel-plated brass nozzle and equipotential bonding cable
• For flammable liquids up to 400 mPas and density up to 1.3

Technical data

• Manufacturer: JESSBERGER GmbH
• Flow rate: up to 78 l/min
• Delivery head: up to 9 m
• Immersion tube length: 1,000 mm for 200 l drums, 1,200 mm for IBCs
• Drive: JP-AIR 1 air motor, 300 W at max. 6 bar, silencer, ball valve at the air inlet to control speed and flow rate
• Pump tube: stainless steel 1.4571, outer Ø 41 mm
• Connections: connection thread G 1¼", hose connection 1" (DN 25)
• Air consumption: 10 l/s under load
• Explosion protection: motor: II 2G Ex h IIC T6 Gb X / II 2D Ex h IIIC T80°C Db X (type examination IBEx U05 ATEX B007 X); pump tube: ZELM 09 ATEX 0424 X
• Viscosity: max. 400 mPas
• Density (specific gravity): max. 1.3
• Fluids: flammable liquids such as alcohols, ethanol, methanol, propanol (diluted), butoxyl, petrol and solvents; low-viscosity foodstuffs

Available versions

Applications

• Transferring alcohols, petrol and flammable solvents from 200 l drums
• Chemical, paint and coatings industry, laboratories and sites with potentially explosive atmospheres

Scope of delivery

• 1 × JP-AIR 1 air motor, 300 W
• 1 × stainless steel 1.4571 pump tube Ø 41 mm, 1,000 or 1,200 mm immersion tube depending on version
• 2 m multi-purpose hose, electrically conductive, 1" (DN 25)
• 2 × stainless steel hose tail (female 1¼" and female 1")
• 1 × nickel-plated brass nozzle 1" (DN 25)
• 1 × equipotential bonding cable set (anti-static set)

Notes

Performance data are maximum values measured with water at 20 °C (rotor version). For use in potentially explosive atmospheres, observe the operating instructions and the marking of motor and pump tube and connect the supplied equipotential bonding cable. Technical data subject to change by the manufacturer.