DEHOUST PE-Kombi Storage Tank 720 l, Double-Walled Bunded Diesel and Heating Oil Tank, Approval Z-40.21-53

DEHOUST PE-Kombi Storage Tank 720 l – Double-Walled Bunded Diesel and Heating Oil Tank, Approval Z-40.21-53

The DEHOUST PE-Kombi storage tank 720 l is a double-walled storage and collection tank with an HD-PE inner container and a tightly welded collecting tray made of sheet steel galvanised on both sides, offering 100 % retention capacity. The tank holds general building approval Z-40.21-53 and is fitted as standard with a visual leak probe, contents gauge and vent cap. The permanently mounted base frame is accessible by forklift; according to DEHOUST, the tank can be installed inside buildings without walling and without an oil-resistant coating.

Product features

• Double-walled: HD-PE inner container in a collecting tray made of sheet steel galvanised on both sides, 100 % retention capacity
• General building approval Z-40.21-53 (DIBt)
• Fitted as standard with visual leak probe, contents gauge and vent cap
• Permanently mounted base frame, accessible by forklift
• Installation inside buildings without walling and without oil-resistant coating
• For heating oil, diesel, lubricating, hydraulic and heat transfer oils, vegetable oils and used oils of known origin (flash point above 55 °C)
• According to the approval, withstands 30 minutes of fire without leaking

Technical data

• Manufacturer: DEHOUST GmbH
• EAN: 4024937820568
• Capacity: 720 l
• Dimensions (L × W × H): 1,100 × 700 × 1,200 mm
• Approval: general building approval (DIBt) Z-40.21-53; leak probe LS-03 (Z-65.40-256)
• Design: double-walled: HD-PE inner container in a tightly welded collecting tray made of sheet steel galvanised on both sides with 100 % retention capacity, permanently mounted base frame
• Standard equipment: visual leak probe, contents gauge, vent cap; 4 top connections 2"
• Stored media: heating oil EL A up to Bio 30 (DIN V 51603-6), paraffinic heating oils (DIN/TS 51603-8), diesel fuel (DIN EN 590), paraffinic diesel fuel (DIN EN 15940), lubricating, hydraulic and heat transfer oils, vegetable oils, used oils of known origin with a flash point above 55 °C; biodiesel (DIN EN 14214) on request
• Installation: inside buildings without walling and without oil-resistant coating; as a single tank or, for heating oil and diesel, as a battery of up to five tanks
• Fire resistance: according to the approval, designed to withstand a fire for 30 minutes without leaking
• Optional accessories (not included): mounting bridge for electric pump 910194, filling pipe 2" with tanker coupling 961305, suction pipe 920081, waste oil funnel 920078, leak alarm OM 1 961230, overfill protection 971615 (only required with a fixed filling connection)
• Weight: approx. 68 kg

Applications

• Storage of diesel fuel for own use in agriculture, construction, fleets and businesses
• Heating oil storage inside buildings
• Storage of lubricating, hydraulic and waste oils of known origin in workshops

Scope of delivery

• 1 × DEHOUST PE-Kombi storage tank 720 l with collecting tray, base frame and visual leak probe
• 1 × contents gauge
• 1 × vent cap

Notes

Local installation regulations must be observed. Biodiesel (RME/FAME): the DEHOUST data sheet lists biodiesel to DIN EN 14214 as a stored medium, while the DEHOUST product page only mentions biodiesel for a special version at extra cost. Please enquire about suitability before ordering. Accessories such as filling pipe, suction pipe, pump or overfill protection are not included. Technical data subject to change by the manufacturer.