Our Manufacturers 21 brands – tanks · pumps · dispensing technology · lubrication systems
At tankundlager.com we stock exclusively products from renowned manufacturers – from German premium brands such as MATO, Pressol and Elaflex through international specialists such as PIUSI, GRACO and Kingspan to established tank manufacturers such as Roth Werke, Schütz and Swimer. All products comply with the current EU standards and are designed for professional continuous use.
Our brand partners – 21 leading manufacturers
Do you have questions about our brands?
Our specialist team will advise you free of charge – on which manufacturer is the best choice for your intended use.
☎ Call +49 36071 924340 Request advice
Filling Station KAP ECO -Under Roof Installation- Diesel Dispensing Station Unloading Area 🚛💧
- Basic Equipment
- Construction: Modular
- Troughs: 2 with drive-over ramps, made of tread plate
- Splash Guard Wall: Optional
- Collection Volume: 150 liters per trough
- Maximum Wheel Load: 10 tons
- Surface: Fully hot-dip galvanized
- Design: KAP ECO under roof
- Weight: 680 kg
- Dimensions (LxWxH): 5200 mm x 2600 mm x 60 mm
- Accessories: 2 troughs including drive-over ramps
Delivery time: 4-6 Wochen
Swivel Joint 1" Male-Female for Manual Dispensing Nozzle for AdBlue® Urea Solution PIUSI
- Swivel Joint
- Size: 1" Male-Female
- For Manual Fuel Nozzle
- AdBlue® Urea Solution
- Manufacturer: PIUSI
- Material: Plastic
Delivery time: 1-3 days
MATO Electric Gear Pump System EP100-F Mobile for Oil Drums with 4 m Pressure Hose 🚛🛢️
- Flow rate: approximately 11 liters per minute (SAE30 with free flow).
- Maximum pressure: approximately 8 bar, suction height up to 2.5 meters.
Delivery time: 2-5 days
1000-Liter Fuel Tank with 12V Pump - Mobile Gas Station Fuel System Rietberg ⛽
- Mobile gasoline tank
- 1000-liter capacity
- Dimensions: 1215mm x 1000mm x 1290mm
- Equipped with a 12-volt pump
Delivery time: 4-6 Wochen
Grease Spray Gun for pneuMATO 55 - LubeJet
- Max. Air Inlet Pressure: 10 bar
- Max. Material Pressure: 250 bar
Delivery time: 2-5 days
Folding Bottom Container SB 2000 2.00m³ 1035x1910x1465mm
- Galvanized or painted
- Capacity: 2.00 m³
- Load capacity: 2000 kg
- Weight: 320 kg, galvanized 344 kg
Delivery time: 3-4 weeks
Ball Valve G ¾"
Delivery time: 2-5 days
Hazardous Material Storage Unit Type GD-N GD-N/R 4 1437x1500x1457mm
- Maximum capacity: 4 x 200-liter drums
- Spill containment volume: 220 liters
- Weight: 290 kg
- Dimensions (LxWxH): 1437 mm x 1500 mm x 1457 mm
Delivery time: 3-4 weeks
PIUSI K400 Oval Gear Meter for Oils
- Accurate dispensing control of lubricating oils
- Oval gears made of acetal resin
- Flow rate: up to 30 L/min
Delivery time: 2-5 days
PIUSI Oil Hose, 5 Meters Long, 1/2" - 150 Bar
Delivery time: 2-5 days
MATO Discharge Hose for Lift Pumps LP-C + LP-S
- PVC discharge hose 2 m with spout
Delivery time: 5-10 Tage
Hose Reel SiA Enclosed with 10m Oil Hose 1/2" Samoa-Hallbauer
- Pressure hose length: 10 m
- Hose diameter: 1/2" / NW 13
- Inlet thread: 1/2” BSP (M)
- Outlet thread: 1/2” BSP (M)
- Working pressure: 160 bar
- Suitable for water, fresh oil, air, and antifreeze
Delivery time: 2-5 days
Tipping Container 0.75m³ 1420x1190x1070mm AK 75
- Galvanized or painted
- Capacity: 0.75 m³
- Load capacity: 1000 kg
- Weight: 187 kg or galvanized: 202 kg
- Dimensions (LxWxH): 1420 mm x 1190 mm x 1070 mm
Delivery time: 3-4 weeks
Wiper Lid for 560-574 mm Drum Inner Diameter
Delivery time: 2-5 days
MATO Pulse Generator for Lubricating Oils, Diesel, and Heating Oil
Delivery time: 2-5 days
1500 L TECA-TANK Eco Yard Fuel Station Tank System for Diesel by Swimer 🚜
- 1500-liter storage container
- 2 versions available
- Double-walled plastic container
- UV-stable
Delivery time: 4-6 Wochen
Folding Bottom Container BKB 1000 1m³ 1040x1200x1270mm
- Galvanized or painted
- Capacity: 1 m³
- Load capacity: 2000 kg
- Weight: 169 kg or galvanized: 182 kg
- Dimensions (LxWxH): 1040mm x 1200mm x 1270mm
Delivery time: 3-4 weeks
Dual Hose for pneuMATO 55 - LubeJet
- Length options: 3.5m, 6.5m, and 10m
- High-pressure grease hose with a burst pressure of 1650 bar
- Equipped with steel braid reinforcements for additional strength
- Accompanied by an efficient compressed air supply hose
- Outer cover with a high-quality protective sheath for secure encapsulation
- Integrated steel spiral enhances performance and durability
Delivery time: 2-5 days
Fresh Oil Island 44 DP3:1 SiAG 4x DP 3:1, SA 10m closed, HDZ
Delivery time: 2-5 days
MATO Trolley for 50-60 Liter Oil Containers
- for 50-60 liter oil containers
- sturdy, galvanized transport cart
- complete with handlebar and drum holder
Delivery time: 5-10 Tage