Our Manufacturers 21 brands – tanks · pumps · dispensing technology · lubrication systems
At tankundlager.com we stock exclusively products from renowned manufacturers – from German premium brands such as MATO, Pressol and Elaflex through international specialists such as PIUSI, GRACO and Kingspan to established tank manufacturers such as Roth Werke, Schütz and Swimer. All products comply with the current EU standards and are designed for professional continuous use.
Our brand partners – 21 leading manufacturers
Do you have questions about our brands?
Our specialist team will advise you free of charge – on which manufacturer is the best choice for your intended use.
☎ Call +49 36071 924340 Request advice
Screw Cap S for Standard Filling Devices and Stationary Pneumatic Grease Pumps, with 3 Side Set Screws, Made of Powder-Coated Steel Sheet
- Material: Steel sheet, powder-coated
- Features: 3 lateral set screws
- S5: Diameter: 220mm, S10-15: Diameter: 310mm, S20-25: Diameter: 365mm, S50: Diameter: 430mm, S200: Diameter: 660mm
Delivery time: 5-10 Tage
Pressure Regulator MDR3/16_22x1.5
Delivery time: 2-5 days
Fuel Dispenser HDA eco for One Dispensing Point, Fuel Data Collection ⛽
Delivery time: 5-10 Tage
Roth Collection Container 990 to 3000 Liters for Garden Irrigation
- Volumen: Ausführungen 900 L (Monobloc), 1.000 L, 1.500 L, 2.000 L und 3.000 L
- Anschlüsse, Schacht & Filter: Zulaufstutzen DN100 am Schacht; Monobloc 900 mit Schacht DN300; 2.000/3.000 L mit fest aufgeschweißtem Domschacht DN600 und integriertem Filterkorb; Ausführungen wahlweise mit/ohne Filterkorb; Wasserentnahme über Tauchpumpe bzw. oberen Schraubanschluss
- Revisionsöffnungen & Gewicht: Revisionsöffnungen Ø300 mm (Monobloc 900), Ø390 mm (1.000/1.500 L mit Filter), Oval 500 × 400 mm (2.000/3.000 L und viele ohne Filter); Gewicht je nach Modell ca. 45–140 kg
Delivery time: 2-5 days
Mobile Fuel Station Quadro-D Double-Walled Tank System Rietberg ⛽
- Mobile diesel tank system
- Available capacities: 700, 1000, or 2000 liters
- Pump options: 12V, 12/24V, or 230 Volt
Delivery time: 5-10 Tage
Stackable Tipper BSK 30 800x600x600mm 0.30m³
- Painted or galvanized
- Volume: 0.3 m³
- Load capacity: 500 mm
- Weight: 50 kg (galvanized: 54 kg)
Delivery time: 3-4 weeks
MATO Tinplate Liquid Measure "Calibratable" with Flexible Spout
- Size: 1 Liter & 2 Liter
- Calibrated liquid measures made from high-quality tinplate with a flexible spout
- Highly stable
- In accordance with calibration regulations, featuring calibration seals and embossed with "for lubricating oils only"
Delivery time: 5-10 Tage
Adapter Piece DN40 to 1 ½" (Male Thread) Schütz 3002321
Delivery time: 1-3 days
Protective Cover for Roth Multitech Tank
Delivery time: 2-5 days
Grease Gun X-TRA 701 - Lubrication up to NLGI 3
- Delivery Rate: Approximately 1 cm³ per stroke
- Capacity: 500 cm³ / 400 g
- Connection Thread: M 10 x 1 or G 1/8"
Delivery time: 2-5 days
Gas Spring 1500N (KAP new)
Delivery time: 2-5 days
Replacement Part - Rotor for TecPump
No longer available
Automatic Dispensing Nozzle ZVA2 NW19 max. 80l/min Slimline
Delivery time: 2-5 days
HORNET W85 H INOX Standard, FMT 3, Side Console 🚀
- Stainless Steel Mounting Bracket
- Voltage: 230V
- Flow Rate: approx. 48 liters/min
- Flow Meter FMT 3
- HORN Automatic Nozzle A 2003-KS
- Suction Hose with SEC Coupling
- Dispensing Hose: 8m
Delivery time: 2-5 days
Double Nipple R1/2" - R1/2" Male MATO
- Brass Double Nipple
- R1/2" - R1/2" external
- With internal cone on both sides
Delivery time: 1-3 days
MATO Enclosed Grease Hose Reel with Buffer, Maximum 500 bar | High Pressure Resistant
- 10 and 15 meter hose
- Wall, ceiling, and floor mounting possible
- Suitable for high-pressure lubricants
- Various installation methods possible
- External connection: R1/4" external
Delivery time: 5-10 Tage
Level Measurement Device LevelController TS 4G excluding Level Probe HORN TECALEMIT
- Data Transmission: LTE (4G)
- Protection Rating: IP 54 for high durability
- Accuracy: up to ±0.5% for reliable measurement results
- Power Supply: 230 V/50 Hz, ideal for use in households and industry
Delivery time: 2-5 days
MATO Premium Oiler HDPE with Rotatable Suction Tube 300 cc
- High-quality oiler for professional use in all maintenance and service areas
- Container made of HDPE
- Newly developed, high-quality nickel-plated double pump system with angled, rotatable suction tube
- Oiling possible in any position
Delivery time: 5-10 Tage
Spill Containment Tray 1200x800x360mm 215 Liters Type Series 2000 with Grate 🌟
- Dimensions (LxWxH): 1200x800x360mm
- Collection Volume: 215 liters
- Weight: 69 kg
Delivery time: 5-10 Tage
Collection Tray 1460x1460x355mm 450 Liters Type AW Painted AW 450
- Dimensions (LxWxH): 1460x1460x355
- Collection Volume: 450 liters
- Weight: 144 kg
Delivery time: 5-10 Tage
Turbo Plug Euro 6.35mm - Valve Core Removal Tool
- Connection: 6.35 mm (suitable for 1/4" tubing)
- Function: Valve core removal tool
Delivery time: 1-3 days
Diesel Fuel Dispenser HDM 80 eco with HDA eco Fuel Management System - TECALEMIT
- Flow rate: 75 L/min
- Data transmission: USB, LAN, cellular network
- Pumped medium: Diesel
Delivery time: 5-10 Tage
PIUSI Viscomat DC 60/2 12V 3/4" Connection Oil Pump, Lubricant Pump
Delivery time: 2-5 days
Manual Grease Gun BMP up to NLGI 2
- Content: 16 kg
- Suitable for greases up to consistency class 2 and oils
- 3 lever settings for different delivery rates: 10 g, 15 g, 20 g per stroke
Delivery time: 1-3 days