Unsere Hersteller 21 Marken – Tanks · Pumpen · Zapftechnik · Schmiersysteme
Bei tankundlager.com führen wir ausschließlich Produkte namhafter Hersteller – von deutschen Premiummarken wie MATO, Pressol und Elaflex über internationale Spezialisten wie PIUSI, GRACO und Kingspan bis zu bewährten Tankherstellern wie Roth Werke, Schütz und Swimer. Alle Produkte entsprechen den aktuellen EU-Normen und sind für den professionellen Dauereinsatz ausgelegt.
Unsere Markenpartner – 21 führende Hersteller
Haben Sie Fragen zu unseren Marken?
Unser Fachteam berät Sie kostenlos – welcher Hersteller für Ihren Einsatzzweck die beste Wahl trifft.
☎ 036071 924340 anrufen Beratung anfordern
Measurement and Shut-off Unit for Oil Management Systems FMOG Non-Calibratable for Oils
Delivery time: 2-5 days
MATO Lever Pump LAP 125
- For 50 to 200 liter drums
- 3-piece suction tube set made of galvanized steel
- 1.2 m PVC delivery hose with discharge sleeve
- Suitable for light oils, heating oil, diesel, kerosene, cold cleaners
- Immersion depth: approximately 850 mm
- Drum thread connection: R2" / 64x4
- Thread connection: Suction tube: R3/8"
- Pumping capacity: 125 cc/stroke
Delivery time: 5-10 Tage
Magnetic Centrifugal Pumps Series PX with Threaded Connection
- Design: Magnetic centrifugal pump with single-phase motor
- Voltage: 230 Volts, 50 Hz
- Operation Mode: T-version with threaded connection
- Material: Pump housing made of polypropylene, PVDF, or PPG
- Bearings: Ceramic spindle bearings
Delivery time: 2-5 days
750 Liter Rainwater Tank Garden Storage ROTH Water Barrel Rain Barrel
- Capacity: 750 liters
- Dimensions: 730 x 730 x 1660 mm
- Inspection Opening: Ø 150 mm
- Weight: 25 kg
Delivery time: 2-5 days
MATO Fuel Replacement Screen for Tinplate Funnel
- Replacement sieve with 0.25 mm mesh size and clamping ring
- Ideally suited for fuels such as gasoline and diesel
Delivery time: 5-10 Tage
MATO Electric Gear Pump EP 300 🌟
- Voltage: 230V
- Flow Rate: approximately 22 liters/minute
- Maximum Pressure: approximately 8 bar
- Suction Height up to 2.5 meters
- Thread Connection: R 3/4" (Pressure Side) / R 1" (Suction Side)
- Suitable for Media Classified as Hazard Class A3
- Flash Point Higher than 55°C
Delivery time: 1-3 days
PE Floor Protection Tray 2610x895x150mm 300 Liters Type BWPS-PE 300 🛡️
- Dimensions (LxWxH): 2610x895x150mm
- Collection Volume: 300 liters
- Maximum Number of 200-Liter Drums: 4
- Weight: 48kg
Delivery time: 5-10 Tage
MATO Suction Hose DN 20, suitable for EP 12, EP 24, and EP 55
- Suitable for EP 12, EP 24, and EP 55
- One-sided with cap nut R3/4" DKR
- Foot valve with intake filter and check valve
Delivery time: 5-10 Tage
Rivet 4 x 6 mm Aluminum (€/1000 pieces)
Delivery time: 2-5 days
Open Hose Reel Oil-25 with 25m Oil Hose 3/4" Samoa-Hallbauer
- For oil
- Hose length: 25 m
- Connection hose: 0.8 m
- Hose diameter: 3/4″ / NW 19
- Inlet thread: 1″ BSP (F)
- Outlet thread: 3/4″ BSP (F)
- Working pressure: 100 bar
- Weight: 57.0 kg
Delivery time: 2-5 days
EZP Pump Set 0.5 Wall-Barrel, 1m Pressure Hose, Ball Valve Samoa-Hallbauer
- Flow rate: approximately 10 liters per minute
- Maximum pressure: 25 bar
- Pressure switch
- Automatic shut-off
Delivery time: 5-10 Tage
Fat Filling Device Füllmeister FG 20 kg Bucket SHV 260 – 306 mm Samoa - Hallbauer
- for 20 kg bucket of grease
- Bucket inner diameter: 260-306 mm
- Delivery rate: approximately 50 cm³/stroke
- Pump tube diameter: 40 mm
Delivery time: 5-10 Tage
Filling Line 2,500 L (Length: 789 mm) for Tank Center Distance: 900 mm Schütz 670901
Delivery time: 2-5 days
Mobile Grease Filling Device Füllmeister FG 25 SHV by Samoa-Hallbauer
- Flow Rate: 50 cc/stroke
- Pump Tube Diameter: 40 mm
- Container: 25 kg
- Bucket Inner Diameter: 285 - 341 mm
Delivery time: 5-10 Tage
Custom Size for Tank Center Distance: 770 mm Protector 3018213
Delivery time: 2-5 days
PIUSI MA190 Pneumatic Diaphragm Pump for Oil Transfer up to 220L/min 🚀
- Flow Rate: 220 l/min
- Inlet and Outlet: 1 1/4" G
- Medium: Waste Oil, Diesel
- Explosion-Proof (EX Zone 2)
|
|
|
Delivery time: 2-5 days
Intermediate Shelf for Type GS-1, GS-2
- Provides additional storage space
- High-quality, durable material
- Easy to install
- Low maintenance and long-lasting
Delivery time: 5-10 Tage
Siphon Protection Valve 3/8"; Adjustable Siphon Protection Valve 0.05-0.4 bar
Delivery time: 5-10 Tage
JP-AIR 3 SS Ø 41 Drum Pump Set – Efficient Solution for Flammable Liquids in Hazardous Areas ⚠️
- Flow Rate: up to 91 l/min (Rotor)
- Delivery Head: up to 13 m (Rotor)
- Max. Viscosity: 600 mPas
Delivery time: 2-5 days
Electric Signal Horn 230V - High-Performance Signaling Device
- Product: Signal Horn
- Electrical Connection: 230V / 50Hz
Delivery time: 2-5 days