Our Manufacturers 21 brands – tanks · pumps · dispensing technology · lubrication systems
At tankundlager.com we stock exclusively products from renowned manufacturers – from German premium brands such as MATO, Pressol and Elaflex through international specialists such as PIUSI, GRACO and Kingspan to established tank manufacturers such as Roth Werke, Schütz and Swimer. All products comply with the current EU standards and are designed for professional continuous use.
Our brand partners – 21 leading manufacturers
Do you have questions about our brands?
Our specialist team will advise you free of charge – on which manufacturer is the best choice for your intended use.
☎ Call +49 36071 924340 Request advice
Withdrawal Line L = 1,145 mm | Contactor 681660 | Robust and Reliable
Delivery time: 2-5 days
Pump Holder for Plastic Canister with Handle
- Attachment to the canister handle
- For plastic canisters of all sizes
- Clamping device
- Made from high-quality plastic
Delivery time: 2-5 days
Pump Set Combiflux for AdBlue® Urea Solution for Smaller Dispensing Volumes with Removable Battery Motor 🚰🔋
- Battery Motor
- with Charger 220-240 V
- Flow Rate: 12 max. 60 l/min
- Nozzle Polypropylene
- Hose DN 19, 2 m
- Immersion Depth: 1000
Delivery time: 2-5 days
Groove Ball Bearing 19x6x6
- Inner Diameter: 6 mm
- Outer Diameter: 19 mm
- Width: 6 mm
- High Load Capacity
Delivery time: 1-3 days
Pressure Hose 2.0 m 1/2" (Male/Female) for DPX6
- Length: 2.0 m
- Connection: 1/2" (External/Internal Thread)
- Compatible with DPX6
Delivery time: 5-10 Tage
High-Performance Drum Pump for 60 and 200 Liter Barrels
- Delivery Volume/Stroke: 0.10-0.25 liters
- Telescopic Suction Tube with G 2″ Drum Adapter
- For 60 and 200-liter Drums
Delivery time: 2-5 days
Galvanized Connection Plate for Clamp
Delivery time: 2-5 days
PIUSI Rigid Spout + Valve B
Delivery time: 2-5 days
Overfill Protection, Sub-distribution with IP54 Protection Rating and Transmitter, Mounted in a Small Enclosure in the Tank, Fully Wired
Delivery time: 5-10 Tage
Dieselmatic Mini 40 12V Type S Samoa Hallbauer
- Special Edition RME
- Pumping capacity: approximately 40 l/min
- 4 m pressure hose
- 1.6 m suction hose with foot strainer
Delivery time: 5-10 Tage
Transport Tank 440 Liters for AdBlue® Urea - Mobile Tank System
- equipped with a powerful 12-volt pump
- includes a 4-meter flexible delivery hose and automatic nozzle
- pump features crocodile clips
Delivery time: 5-10 Tage
Spreader STW 100 Liter, Maximum 6m Spreading Width
- Hopper Capacity: 105 liters
- Maximum Spreading Width: 6 meters
- Load Capacity: 135 kg
- Weight: 28 kg
Delivery time: 3-4 weeks
Diaphragm Pump SB 34-IBC for AdBlue® Urea Solution
- Fully assembled
- For IBC containers
- Includes automatic dispensing nozzle
- Nozzle holder with integrated drip tray
- Flow rate: approximately 34 l/min
Delivery time: 2-5 days
2-piece lid for type GU 300, SGU 30 BAUER
- Can be opened from both sides
- Front section can be locked in the open position
Delivery time: 3-4 weeks
Mato Electric Fuel Dispensing System EX 50 with ATEX Certification and Meter
- Flow rate: approximately 50 liters per minute (with free discharge)
- Voltage: 230V
- Includes explosion-proof vane pump EX50
- Self-priming, explosion-proof vane pump EX 50 with ATEX certification Ex dIIA T4 Gb
- Suitable for pumping media classified under hazard class A1 with a flash point <21°C
- Examples include gasoline, two-stroke fuels, Aspen, kerosene
- Includes integrated bypass pressure regulation and check valve, flange connection with 1" internal thread
- Loose 4-meter connection cable included with fittings (installation must be performed by a professional)
- 1.5-meter grounding cable with crocodile clip
- 2" drum adapter
Delivery time: 2-5 days
Filling Table for Three Dispensing Points TECALEMIT
- 3 dispensing points
- Connection thread: 1/2" female and 3/4" male
- Housing: painted sheet steel
- Ambient temperature: 0°C to +40°C
- Media temperature: 0°C to +55°C
- Max. viscosity: 5,000 mPas
- Dimensions: 435 x 565 x 675 mm
- Weight: 24 kg
Delivery time: 5-10 Tage
MATO Impulse Generator, Calibratable with Display for Lubricating Oils
- Output: 2 channels
- 2x 100 = 200 pulses per liter
- Thread connection: R1/2" female thread
- Accuracy: +/- 0.3%
- Maximum pressure: 70 bar
- Flow rate: 1 - 35 liters per minute
- Includes preliminary test certificate for 1 - 10 liters per minute
- Suitable for engine, transmission, and hydraulic oils
Delivery time: 2-5 days
PIUSI Hose Reel 60 bar with 10 m 1" Oil Hose with Hose
- Medium: Oil
- Max. Operating Pressure: 60 bar
- Inlet with Swivel Joint: 1" Male Thread
- Outlet Hose Connector: 1" Male Thread
- Hose Length: 10m
Delivery time: 5-10 Tage
Radiator Q-AG 450 Screw-In Heater for Quadro AG 450
Delivery time: 5-10 Tage
Refill Nipple G1/4"i for Lubricator "Simalube Series"
- Thread Size: G1/4" internal
- Compatibility: Simalube Lubricator Series
- Material: High-quality metal
Delivery time: 2-5 days