- Applicable for inner diameters of 165 - 200 mm
- Compatible with suction pipe diameter of 40 mm
Delivery time: 5-10 Tage
- Inner Diameter: 255 - 282 mm
- Usage: Suction Pipe Diameter 40 mm
Delivery time: 5-10 Tage
- Inner Diameter: 285-305 mm
- Suction Pipe Diameter: 40 mm
Delivery time: 5-10 Tage
- Suitable for inner diameter Ø 265 - 285 mm
- Suitable for suction pipe Ø 40 mm
- Compatible with models: eco-/centraFILL, Bucket-Greaser, pneuMATO 55, pneuMATO 75, pneuMATO-fill
Delivery time: 5-10 Tage
- Suction Pipe Diameter: 40 mm
- Internal Diameter: 220 - 267 mm
Delivery time: 2-5 days
- Suitable for suction pipe diameter Ø 40 mm
- Compatible with inner diameter Ø 215 - 230 mm
Delivery time: 2-5 days
- For inner diameter Ø 300 - 335 mm
- Suitable for suction pipe Ø 40 mm
- Compatible with: eco-/centraFILL, Bucket-Greaser, pneuMATO 55, pneuMATO 75, pneuMATO-fill
Delivery time: 5-10 Tage
- Inner Diameter: 305 - 350 mm
- Suction Pipe Diameter: 40 mm
Delivery time: 5-10 Tage
- Suitable for suction pipe diameter Ø 40 mm
- Compatible with internal diameter Ø 385 - 410 mm
Delivery time: 2-5 days
- For grease containers from 5 kg to 200 kg
- For greases of NLGI grade 000 - 2
- 3 lateral set screws for secure fastening
- Follower piston for consistent supply
Delivery time: 1-3 days
- Capacity: 10 kg to 50 kg
- Inner Diameter: 215 mm to 387 mm
- Suitable for Greases of NLGI Grade 000 - 2
- Special Mechanism for Optimal Centering
Delivery time: 5-10 Tage
- For 25 kg containers
- Inner diameter: 300 - 335 mm
- Delivery rate: approximately 50 cc/stroke
- Pump tube diameter: 40 mm
Delivery time: 5-10 Tage
- Ideal for 15/18 kg containers with an internal diameter of 255 - 282 mm
- Compatible with greases up to consistency class 2 (including fluid greases)
- Also suitable for bio-lubricating greases and long-term greases with adhesion additives
Delivery time: 5-10 Tage
- For fat buckets ranging from 5kg to 50kg
- Suitable for greases with NLGI grade 000 - 2
- Screw lid for easy access
- Three lateral set screws
- Follower piston for continuous delivery
- 2-meter PVC hose
- ISO standard 7241B DN6/R1/4 ZSA coupling
Delivery time: 5-10 Tage
- for 18/20 kg JOKEY plastic containers (Jet 2000)
- with a centering lid featuring special holding claws for optimal attachment of the lid to the JOKEY container
Delivery time: 5-10 Tage
- Filling device for greases of NLGI class 000 - 2
- 25kg grease bucket, inner diameter 300-335mm
- 300mm safety rubber armored hose RH-30C (steel braid inserts, burst pressure 1,650 bar, Ø-13mm)
- 6 empty cartridges
- Lube-Shuttle refill adapter set
Delivery time: 1-3 days
- Fat Container: from 10 kg to 50 kg
- Fat Processing: Suitable for greases of NLGI class 000 to 2
- Hose Length: 2 m PVC hose
- ZSA Coupling: Complies with ISO Standard 7241B DN6 / R1/4"
- For 15/18 kg fat container
- Operating temperature: up to -20°C
- Actuation force: 11 – 16 kp
- Grease consistency class: up to 2 (including fluid greases)
- Delivery rate: approximately 30 ccm/stroke
- Pump tube diameter: 40 mm
- Application area:
Delivery time: 5-10 Tage
- For 25 kg grease pails
- Pump tube diameter: 40 mm
- Maximum operating pressure: 35 bar
- Operable at temperatures down to -20°C
- Grease follower plate suitable for pails with an internal diameter of 285 mm - 341 mm
- Dust cover fits pails with an external diameter of 312 mm - 362 mm
- Delivery volume is approximately 30 cm³ per stroke
Delivery time: 5-10 Tage
- Capacity: 15 to 50 kg
- Suitable for greases of NLGI class 000 to 2
- Bucket diameter: 255-387 mm
- 2-meter long PVC hose with ZSA coupling according to ISO standard 7241B DN6 / R1/4"
Delivery time: 5-10 Tage
- For 50 kg grease buckets
- Suitable for greases up to consistency class 2 (flow greases)
- Bucket compatibility: Compatible with all commercially available grease buckets
- Grease follower plate for inner bucket diameter: 340 mm - 393 mm
- Dust protection cover for outer bucket diameter: 383 mm - 433 mm
- Combination connector: Equipped with ball valve
Delivery time: 5-10 Tage
- For 25 kg fat container
- Operates at sub-zero temperatures down to -20° C
- Delivery rate approximately 30 ccm/stroke
- Pump tube diameter 40 mm
- Low actuation force required (11 – 16 kp)
Delivery time: 5-10 Tage
- Suction Tube Length: 525mm, 790mm, 940mm, 1490mm
- Flow Rate: approximately 4,000 g/min at 8 bar inlet pressure
- Pressure Performance: approximately 24 bar
- Pressure Ratio: 1:3
- Connection Thread: R1/2"
Delivery time: 5-10 Tage
- Suitable for 50 kg fat containers
- Compatible with greases up to consistency class 2
- Accessories: Grease follower plate, dust protection cover, combination connector with ball valve, 2 m PVC grease hose NW 16, nylon-reinforced, self-sealing quick coupling
- Delivery rate: Approximately 30 ccm per stroke
- Pump tube diameter: 40 mm
Delivery time: 5-10 Tage
Grease Filling Devices – Precise & Clean Filling of Grease Guns
Grease filling devices enable clean, efficient, and drip-free filling of grease guns and lubrication equipment. They are indispensable for professional use in workshops, industry, and agriculture.
Why Use a Grease Filling Device?
- Clean Handling: Prevents contamination and grease loss.
- Easy Filling: Perfect dosing for grease guns and lubrication systems.
- Cost-Efficient: Reduces grease waste and maintenance costs.
- Versatile Use: Compatible with various grease guns and cartridges.
Types of Grease Filling Devices
- Manual Grease Filling Devices: Simple filling without additional power supply.
- Pneumatic Grease Filling Devices: Powerful models for professional use.
- Drum Grease Filling Systems: Direct transfer from 20L or 50L grease containers.
- Automatic Grease Filling Stations: Perfect for large operations and industrial applications.
Find the Right Grease Filling Device Now
Ensure clean and efficient grease supply – explore our grease filling devices for professional lubricant handling!