- Connection: 2 x DN 19
- Dimensions: 120 x 52 x 85 mm
Delivery time: 1-3 days
- For mounting the meter on the W40 pump
- Easy installation
Delivery time: 1-3 days
- Accurate dispensing control of lubricating oils
- Oval gears made of acetal resin
- Flow rate: up to 30 L/min
Delivery time: 2-5 days
- Flow rate min./max. 5 – 120 l/min
- Suitable for diesel, heating oil El/L, AdBlue®, RME, antifreeze (concentrate), water
- Display: 2-line, LED illuminated, 6-digit LC display with 16 mm character height
Delivery time: 1-3 days
- Inlet/Outlet: 1" male thread x 1" female thread
- Display can be rotated to four positions for optimal readability
- Suitable for heating oil, kerosene, diesel, windshield antifreeze
Delivery time: 1-3 days
- For engine oils and gear oils
- 5-digit LCD display
- Very high measurement accuracy
- Unit flexibly programmable
Delivery time: 2-5 days
- Medium: Diesel, Heating Oil
- Internal Thread: 1 Inch
- Flow Direction: Bottom to Top
Delivery time: 1-3 days
- Flow rate: 20–120 l/min
- Max. operating pressure: 3.5 bar
- Connection: 1" BSP (inlet/outlet)
- Dimensions: 176 mm length; 100/128 mm (depending on view); connection area Ø 34.1 (1" BSP); 62 mm (connection area)
Delivery time: 1-3 days
- Retrofit Kit
- Medium: Diesel, Heating Oil
- Internal Thread: 1 Inch
- Flow Direction: Bottom to Top
Delivery time: 1-3 days
- Flow Rate: 20-90 liters per minute
- Accuracy: ±0.8% (20-90 liters per minute), ±0.6% (50-70 liters per minute)
- Maximum Operating Pressure: 3.5 bar
- Inlet/Outlet Flange: Ø6 or Ø8 mm
- Operating Temperature: -20°C to +55°C
- Suitable for Diesel up to B20, HVO, Gasoline up to E20, Kerosene, Avgas 100/100LL, Jet A/A1, and Aspen 2/4.
- Flow Direction: Inlet: Bottom, Outlet: Right
Delivery time: 1-3 days
- External Thread: 1 inch
- Internal Thread Diameter: 1 inch
- Flow Range: Min 5 – Max 120 l/min
- Measurement Accuracy: After Calibration ± 1%
- Nominal Pressure: Maximum 10 bar
Delivery time: 1-3 days
- For retrofitting to the Hornet W40
- Thread: 1"
- Flow rate min./max.: 5 – 120 l/min
Delivery time: 1-3 days
- For retrofitting Hornet 50/80
- Thread: 1"
- Flow rate min./max.: 5 – 120 l/min
Delivery time: 1-3 days
- Flow rate: 20–120 l/min
- Max. operating pressure: 3.5 bar
- Connection: 1" BSP (inlet/outlet)
- Dimensions: 176 mm length; 100/128 mm (depending on view); connection area Ø 34.1 (1" BSP); 62 mm (connection area)
Delivery time: 1-3 days
- Specifically designed for AdBlue
- Accurately measures flow rates from 5 to 120 l/min
- Connection: Universal 1" fitting
Delivery time: 1-3 days
- Not calibratable
- Resettable
- Easy to use
Delivery time: 1-3 days
- Type of Fluid: Oil
- Flow Rate: 20-120 l/min
- Flow Direction: From left to right
- Pressure: 10 Bar
- Inlet-Outlet: 1" BSP
Delivery time: 1-3 days
- Electronic liter counters and pulsers with integrated oval gears
- Flow rate: 1-30 l/min
- Inlet / Outlet: 1/2" BSB
Delivery time: 2-5 days
- Flow Rate: 20 – 120 l/min
- Max. Operating Pressure: 3.5 bar
- Medium: Oil
- Burst Pressure: 28 bar
- Connection: 1" BSP Female Thread
Delivery time: 1-3 days
- Flow rate: 6-60 l/min
- Accuracy: approximately 0.5%
- Pressure: 70 bar
- Repeatability: 0.2%
- Connection: 3/4"a
Delivery time: 2-5 days
- Flow Range: 1-15 L/min
- Maximum Delivery Pressure: 10 bar
- Viscosity Range: 20 - 2000 mPa·s
- Display: 5-digit digital display
- Medium Temperature: -10 to +50 °C
Delivery time: 2-5 days
- Rotatable Display
- 6-digit Total Value, 5-digit Partial Value
- Maximum Operating Pressure: 20 bar
- Inlet/Outlet: 1" male thread x 1" female thread
- Measurement Accuracy: ± 1%
- Includes Batteries: 2x1.5V
- Weight: Only 0.5 kg!
Delivery time: 1-3 days
- Connection Thread: G 3/4″ (internal/external)
- For liquids with an operating temperature from -10° C to +50° C
- Flow Range: 1 – 25 l/min
- Measurement Accuracy: ± 0.5%, calibratable
- Max. Pressure: 70 bar
- Two easily replaceable standard batteries (AAA)
Delivery time: 2-5 days
- 1" Connection
- Vertical Flow Direction
- Resettable Display
- Flow Rate and Total Volume Display
Delivery time: 2-5 days
Metering Systems for Tank Systems – Precise Fuel Measurement for Enhanced Control
Modern metering systems provide accurate measurement and documentation of diesel, gasoline, and AdBlue®. They are ideal for gas stations, vehicle fleets, and industrial applications.
Why Choose a Metering System?
- Precise Measurement: Accurate recording of the dispensed volume.
- Digital and Mechanical Models: Customizable to meet individual requirements.
- Easy Installation: Compatible with many pump systems.
- Cost Control: Transparent fuel billing.
What Types of Metering Systems Are Available?
- Mechanical Meters: Robust technology for reliable measurement.
- Digital Flow Meters: Precise recording and digital display.
- Calibratable Meters: Legally compliant measurement systems for billing.
- Accessories and Spare Parts: Extensions and maintenance components.
Find the Right Metering System Now
Optimize your refueling processes – discover high-quality metering systems for precise liquid measurement!