Skip to main content Skip to search Skip to main navigation
Free shipping* on orders over €20
Call now +4936071924340
Opening hours Mon-Fri 8:00 a.m. - 5:00 p.m
Call now +4936071924340

Rietbergwerke GS-TP-elh 995 Hazardous Substance Collector, Double-Walled 995 l Collecting Tank for elh Liquids, Z-38.12-288, Galvanised

Rietbergwerke GS-T-elh 250/400 and GS-TP-elh 600/995 Hazardous Substance Collectors – Double-Walled Collecting Tanks for elh Liquids, Z-38.12-288

The Rietbergwerke hazardous substance collectors take waste oil of unknown origin, petrol and other elh liquids. These are liquids with a flash point below 55 °C. Workshops, fleets and industrial plants use them to collect and store such substances. You choose between 250, 400, 600 and 995 l capacity.

Thanks to the double-walled design with leak monitoring you install the collector outdoors or indoors without a drip tray. The tank is explosion-pressure-shock-resistant and withstands even an explosion inside. The hot-dip galvanised steel does not rust, even in permanent outdoor use. You can place several tanks side by side with small clearances.

Which version suits you?

  • For smaller collection volumes: GS-T-elh 250 or 400 l with manually operated funnel lid.
  • If you fill frequently and want your hands free: GS-TP-elh 600 or 995 l with self-closing pedal-operated lid.
  • Space required: footprint from 750 × 750 mm (250 l) to 1450 × 1250 mm (995 l); height including vent line 2.5 m.
  • All sizes: 400 mm filling funnel, overfill protection, dipstick and lockable suction line.

Product features

  • Approved storage – general building authority approval Z-38.12-288 as a storage tank for elh liquids (flash point below 55 °C) and other water-polluting liquids
  • Leaks are detected without a power supply – double-walled within the meaning of the AwSV (German Ordinance on Facilities for Handling Substances Hazardous to Water) with permanent vacuum leak monitoring of both walls that needs no external power
  • No drip tray needed – approved for installation outdoors and indoors; storage without an additional drip tray or special containment room
  • Space-saving installation – only small clearances are required between tanks when several are installed
  • No rust even in permanent outdoor use – all-steel, hot-dip galvanised inside and out
  • Convenient filling – 400 mm filling funnel with manual shut-off ball valve; self-closing pedal-operated lid (GS-TP-elh) or manual lid (GS-T-elh 250/400)
  • Safety with flammable substances – explosion-pressure-shock-resistant design that withstands even an explosion inside the tank
  • No overfilling, level in view – built-in hydraulic overfill protection, easy-to-read dipstick and permanently open vent line
  • Secure extraction and retrofitting – suction line with lockable safety screw connection and 1 spare socket 1", e.g. for an additional overfill protection device
  • Easy to move when empty – closed base frame for occasional in-house transport when empty by forklift or pallet truck
  • Safe crane handling – lifting eyes for transport when empty, crane handling according to DGUV Information 209-013

Technical data

  • Manufacturer: Rietbergwerke
  • Type / capacity: GS-T-elh 250 and 400, GS-TP-elh 600 and 995 (250 to 995 l)
  • Medium: elh liquids (flash point below 55 °C, e.g. waste oil of unknown origin or petrol) and other water-polluting liquids
  • Approvals: general building authority approval Z-38.12-288
  • Construction: double-walled within the meaning of the AwSV, vacuum leak monitoring of both walls, all-steel
  • Material: steel, hot-dip galvanised inside and out
  • Dimensions: 750 × 750 × 1050 mm to 1450 × 1250 × 1230 mm (L × W × H), per size see table
  • Height including vent line: 2.5 m above ground level
  • Weight: 170 to 290 kg (manufacturer's figure)
  • Filling funnel: 400 mm, manual shut-off ball valve; pedal-operated lid (GS-TP-elh) or manual lid (GS-T-elh)
  • Overfill protection: built-in hydraulic overfill protection
  • Level check: dipstick
  • Connections: permanently open vent line, suction line with lockable safety screw connection, 1 spare socket 1"
  • Explosion protection: explosion-pressure-shock-resistant
  • Lifting: lifting eyes according to DGUV Information 209-013 (empty transport); closed base frame for occasional transport when empty
  • Optional accessories: additional socket 2" I for an extra overfill protection device (83674), additional socket 2" II with filling line (83673); vent hood Ex (47822); inspection dome DOM II, 400 mm, for GS 995 (85996)

Available versions

Item no.Version
R-71371GS-T-elh 250 (Rietbergwerke 71371): 250 l, 750 × 750 × 1050 mm, 170 kg, manual lid, Z-38.12-288, galvanised
R-71372GS-T-elh 400 (Rietbergwerke 71372): 400 l, 1000 × 1000 × 1025 mm, 200 kg, manual lid, Z-38.12-288, galvanised
R-71373GS-TP-elh 600 (Rietbergwerke 71373): 600 l, 1200 × 1000 × 1210 mm, 230 kg, pedal-operated lid, Z-38.12-288, galvanised
R-71374GS-TP-elh 995 (Rietbergwerke 71374): 995 l, 1450 × 1250 × 1230 mm, 290 kg, pedal-operated lid, Z-38.12-288, galvanised

Scope of delivery

  • 1 × Rietbergwerke hazardous substance collector in the selected size, hot-dip galvanised inside and out, with filling funnel, overfill protection, dipstick, vent line and suction line

Notes

According to the manufacturer the tank is to be operated by competent persons. The height including the vent line is 2.5 m above ground level for all sizes. Installation, operation and inspections must comply with the applicable regulations (including the German AwSV) and the manufacturer's instructions. Technical data subject to change by the manufacturer.

Seppeler Rietbergwerke GmbH & Co. KG
Bahnhofstraße 55
33397 Rietberg, Deutschland

https://www.seppeler.de/rietberg-behaelter/

rietbergbehaelter@seppeler.de

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Accessory products

Rietbergwerke Ex Breather Hood (47822), Deflagration-Proof and Endurance-Burning-Proof, Explosion Group IIA
Rietbergwerke Ex Breather Hood (47822), Deflagration-Proof and Endurance-Burning-Proof, Explosion Group IIA
  • Type: Ex breather hood
  • Explosion group: IIA
  • Protective function: deflagration-proof and endurance-burning-proof
  • Deflagration-proof and endurance-burning-proof breather hood
  • Protects the vent line against fire and atmospheric deflagration

Delivery time: 4-6 Wochen

€1,222.00*
€1,026.89 without VAT